Amarok/Manual/ConfiguringAmarok

    From KDE UserBase Wiki
    Revision as of 18:18, 26 August 2013 by Fri (talk | contribs) (Created page with "| <menuchoice>Seřídit počet přehrání</menuchoice> || Zaškrtnout pro seřízení počtů přehrání mezi sbírkami.")

    Nastavení Amaroku

    Při prvním spuštění je uděláno základní nastavení; podívejte se také na Průvodce rychlým spuštěním: Začínáme. Ale je toho více, co se dá nastavit.

    Pro přístup k nabídce s nastavením jděte do Nastavení -> Nastavit Amarok... a uvidíte následující dialog:


    Obecné volby nastavení

    Obecné

    Na obrázku výše vidíte některé obecné volby, jež můžete nastavit. V závislosti na distribuci se mohou výchozí nastavení lišit. Když je ukazovátko myši nad volbami, ukáže se nástrojová rada, která vysvětlí význam toho kterého nastavení.

    Obecné volby:

    Volba Nástrojová rada
    Ukázat ikonu v panelu Zaškrtněte pro povolení ikony Amaroku v oznamovací oblasti panelu.
    Automaticky získávat obaly alb Zaškrtněte pro povolení automatického získání obalu z internetu.
    Povolit animaci při skládání doplňku v hudebních souvislostech Zaškrtněte pro povolení animací při zavírání doplňků v poli s hudebními souvislostmi.
    Automaticky posunout seznam skladeb na současnou skladbu Zaškrtněte, aby se seznam skladeb posunoval, aby byla nynější skladba vždy viditelná.
    Ukázat náladový pruh v posuvníku s postupem přehrávání Náladový proužek umožňuje pohyb ve vaší hudbě pomocí zraku. Všimněte si, prosím, že tato funkce vyžaduje vnější nástroj generátoru náladového proužku, nebo skript.
    Styl náladového proužku Vybrat styl zobrazení nálady.

    Pokud povolíte náladový proužek, buďte si vědomi následujících požadavků: Náladový proužek se bude zobrazovat jen tehdy, když byly vaše skladby označeny náladami. Více se o náladovém proužku dozvíte v části nazvané: Náladový proužek.

    Místní sbírka

    Nastavení místní sbírky

    Tento dialog ukazuje váš souborový systém jako stromovou stavbu, která zobrazuje složky se sbírkou. Výběr složky vždy zahrnuje její podsložky. V těchto složkách budou hledány hudební soubory, ze kterých bude vytvořena vaše sbírka. Můžete na složku klepnout pravým tlačítkem myši, aby byla tato prohledána, pokud to bylo předtím vybráno.

    Volby pro sbírku:

    Volba Nástrojová rada
    Prohledat všechno znovu Prohledat celou sbírku. Nebudou tím smazány žádné statistiky.
    Zavést Zavést hodnocení a/nebo statistiky ze starších verzí Amaroku, hromadného skeneru nebo multimediálních přehrávačů.
    Prohledávat složky včetně podsložek (je-li zaškrtnuto nově, vyžaduje úplné znovuprohledání) Je-li vybráno, Amarok bude číst všechny podsložky.
    Sledovat změny ve složkách Je-li vybráno, složky se sbírkami budou sledovány kvůli změnám. Hlídač nepostřehne změny, které se odehrají za symbolickými odkazy.
    Zavedení hudby: Převést skladby Zda má Amarok překódovat skladby, když jsou kopírovány nebo přesouvány do místní sbírky.

    Zavedení statistik

    Tato volba vám umožní zavedení statistik, tj. hodnocení a výsledků ze

    • staršího Amaroku verze 1.4.x (z databází SQLite, MySQL nebo PostgreSQL), nebo z
    • iTunes

    Nezavádí statistiky z databáze Amaroku 2.x, takže pokud chcete udělat sloučení starší verze databáze 2.x, budete to muset udělat vlastnoručně.

    Popisná data

    Tento dialog vám umožní provést nastavení pro zacházení s popisnými daty. Toto je samostatná stránka počínající s Amarokem 2.7

    Volby pro popisná data:

    Volba Nástrojová rada
    Zapsat statistiky do souboru Zaškrtnout, aby se statistiky měnící se při hraní zapisovaly jako značky do zvukových souborů.
    Zapsat obaly do souboru, největší velikost... Zaškrtnout, aby se změněné obaly zapisovaly zpět do zvukových souborů. Tímto se nahradí stávající vložené obaly. Vyberte hodnotu z rozbalovacího seznamu pro nastavení největší velikosti obalu.
    Povolit zjišťování znakové sady ve značkách ID3 Je-li zaškrtnuto, Amarok použije Mozillin zjišťovací přípravek na určení znakové sady, aby se pokusil automaticky uhádnout znakové sady ve značkách ID3. Pokud jsou vaše značky správné, je bezpečnější nechat tuto volbu vypnutou.

    Seřízení statistik

    Tento dialog vám umožní uchovat statistiky vaší sbírky seřízené. Ujistěte se, že zaškrtáváte pouze sbírky, mezi nimiž chcete seřizovat data.

    Volby pro seřízení statistik:

    Volba Nástrojová rada
    Seřídit hodnocení Zaškrtnout pro seřízení hodnocení mezi sbírkami.
    Seřídit poprvé přehráno Zaškrtnout pro seřízení poprvé přehraných dat mezi sbírkami.
    Seřídit naposledy hráno Zaškrtnout pro seřízení naposledy hraných dat mezi sbírkami.
    Seřídit počet přehrání Zaškrtnout pro seřízení počtů přehrání mezi sbírkami.
    Seřídit štítky Zaškrtnout pro seřízení štítků mezi sbírkami.

    Přehrávání

    Dialog pro nastavení přehrávání

    Nastavit volby pro přehrávání a multimediální systém KDE Phonon.

    Volba Nástrojová rada
    Fadeout on stop If checked, Amarok will slowly fade the volume of the playing track on stop or at the end of the playlist, or stop playback immediately.
    Fadeout on pause If checked, Amarok will slowly fade the volume of the playing track on pausing the current track.
    Fadeout duration The length of the fadeout, in milliseconds.
    Inhibit automatic suspend if playing If checked, Amarok will prevent the computer from being suspended will a track is playing.
    Pause playback on suspend If checked, Amarok will pause playing of the current track when the computer is about to suspend.
    Resume playback on start If checked, Amarok will resume playback where you left it the last session -- just like a tape-player.

    Nastavení Phononu

    Phonon je multimediální systém používaný Amarokem. Byl vytvořen, aby KDE 4 umožnil nezávislost na multimediální systémech, jako jsou GStreamer nebo VLC, a aby poskytl stabilní API po dobu života KDE 4. Přidaným bonusem je, že zjednodušuje vývoj tím, že poskytuje jednoduché API, které pracuje na různých platformách, jako jsou Windows a OS X.

    Pro vás uživatele to znamená, že si můžete vybrat multimediální systém, který vám nejlépe vyhovuje. Obvykle je přednastaven vaší distribucí.

    Potíže s přehráváním v Amaroku typicky nejsou problémem Amaroku, ale spíše problémem Phononu, protože Amarok se už o zvuk přímo nestará.

    Karta pro nastavení zařízení

    Depending on your OS and distribution, you may need to use ALSA, OSS, PulseAudio, or something else as your default playback device. Find one that works for you with the Test button and apply to all types of output. If you would like different types of output to go with different devices, this is possible as well.

    Karta pro nastavení reproduktoru

    Když chcete změnit běžné nastavení reproduktoru, zde je místo, kde se to dělá.

    Karta pro podpůrnou vrstvu

    V závislosti na operačním systému zde vidíte volby jako Gstreamer, VLC, nebo DS9 (Windows). Doporučená podpůrná vrstva pro Phonon pro uživatele Linuxu je VLC nebo Gstreamer.

    Pokud nevidíte VLC nebo Gstreamer, nainstalujte jejich balíček. U většiny distribucí se například balíček pro VLC jmenuje phonon-backend-vlc.

    Každá podpůrná vrstva přichází se svými vlastními kodeky, takže v závislosti na podpůrné vrstvě, kterou si zvolíte, budete také potřebovat stáhnout kodeky, jelikož většina distribucí je z právních důvodů nedodává.

    Oznamování

    Dialog pro nastavení oznamování


    ,

    Volba Nástrojová rada
    Use On-Screen Display Check to enable the On-Screen Display. The OSD briefly displays track data when a new track is played. Once checked, the OSD will be visible on your screen and you can drag it to the location you prefer.
    Duration The time in milliseconds for which to show the OSD. The value must be between 500 ms and 10000 ms.
    Screen Allows you to choose the screen that should display the OSD if you have a multiscreen setup. Default is 0.
    Translucent Check to enable translucency if supported by your desktop system.
    Font scale (choose the size of the font in the OSD)
    Don't show when a fullscreen application is active Do not show On-Screen Display if another application is focused and running in fullscreen mode.
    Use custom colors Check to enable custom colors for the On-Screen Display text.
    Text color Click to select the color of the OSD text.
    Use system notifications Check to use the system notification. This can vary depending on your desktop system and/or distribution.

    Databáze

    Dialog pro nastavení vnější databáze

    The default database is already set to use embedded MySQL. For most users there is no need to configure an external database, as there is no change in performance. If you want to share your database or use it remotely, you can configure an external MySQL database.

    Amarok expects the external database and user account to already exist. The user also requires full access to the database. You MUST restart Amarok after changing these settings.

    If your database is not already set up, you can use the SQL commands in the field at the bottom to do so, after replacing the password with the correct one.

    Volba Nástrojová rada
    Use external MySQL Database Check to enable the use of an external database.
    Server Enter the name of the existing MySQL server.
    Port Enter the port number to access the server. Default is port 3306.
    Username Enter the username to access the database with full access privileges.
    Password Enter the password for the default user.
    Database Enter the name of the database. Default preset is amarokdb.

    You can find more information about the External Database here.

    Přídavné moduly

    Dialog pro nastavení přídavných modulů

    Plugins configuration controls Collections, Internet Services, and Local Collection Backends.

    Sbírky

    Amarok nabízí přístup k následujícím sbírkám, pokud jsou dostupné:

    Sbírka Popis
    Sbírka AudioCD Přídavný modul pro sbírku AudioCD pro Amarok
    DAAP Collection DAAP collection plugin for Amarok
    iPod, iPad & iPhone Collection Plugin to use iPod-like devices as collections in Amarok
    MTP Collection MTP collection plugin for Amarok
    Universal Mass Storage Collection UMS/USB collection plugin for Amarok
    UPnP Collection UPnP collection plugin for Amarok

    Internetové služby

    Amarok offers by default the following Internet services:

    Service Description Needs configuration
    Ampache Use an external music server Yes, Ampache server needed
    gpodder.net Podcast service. See also gpodder.net No
    Jamendo Listen to free music published under Creative Common licenses. See also Jamendo.com No
    Last.fm A popular internet radio service, streaming only for subscribers. See also Last.fm Yes, personal information to scrobble
    Magnatune Store Preview and buy music from a non-evil record label. See also Magnatunes.com Only for downloads
    MP3 Music Store Access the Amazon MP3 Store directly from Amarok Yes
    mp3tunes A personal mp3 locker. See also mp3tunes.com Yes
    Podcast Directory Browse and subscribe to a huge choice of podcasts No


    Other service are available through scripts.

    Podpůrné vrstvy pro místní sbírku

    Amarok offers you access to the following Local Collection Backends, if they are available:

    Zařízení Popis
    Local Files & USB Mass Storage Backend Local Collection folders on local and pluggable disks
    NFS Share Backend Local Collection folders on remote NFS shares (Network File System)
    SMB (Windows) Share Backend Local Collection folders on remote Samba (Windows) shares

    Nastavení Ampache

    If you have access to a remote Ampache music server, click and enter the necessary information. You can configure access to more than one Ampache server. For more information see the Ampache section in what follows.

    Nastavení Last.fm

    While streaming is free with Last.fm's own online player for residents of the US, the UK and Germany, it only works in Amarok for paid subscribers. Scrobbling is free, however, provided you enter your Last.fm username and password by clicking . Amarok allows you to store the password in the secure KDE Wallet. If you decline the use of Kwallet, your password will be stored in clear text instead.

    Nastavení Magnatune store

    Listen to the music offered by Magnatune for free and buy it directly through Amarok. Click to add your membership credentials if you are a member and/or add your email address to re-download music you previously have downloaded from Magnatune.

    To download, you then go to the Media Sources pane, select the Internet section and click on the Magnatune Store. It will then download the catalog where you can search and select the music you want to buy.

    Nastavení MP3 Store

    Access the Amazon MP3 Store directly from Amarok.

    The Amazon MP3 Store needs to know what country you are located in because it offers different items depending on your location. The following countries are allowed:

    • France
    • Austria, Germany, Switzerland
    • Japan
    • United Kingdom
    • United States (default)

    NOTE: Changing the country invalidates your shopping cart. If your country is not in the list, you cannot use the Amazon MP3 Store because it is not supported by Amazon.

    Nastavení mp3tunes

    If you have a personal mp3tunes locker, click and enter your username and password. You will then be able to access your online locker.

    Skripty

    Scripts configuration dialog (click to enlarge)

    Script Configuration in Amarok covers Generic, Lyrics, and Scriptable Service scripts. Scripts are added in the Manage Scripts dialog.

    Generické skripty

    Generic scripts add functionality to Amarok. The Amarok Script Console is available by default; other scripts which add CD burning, cover image storage, games, and many other choices are available. If installed, these scripts will show up in the Tools menu.

    Skripty pro texty písní

    A variety of lyrics scripts are available; Ultimate Lyrics is provided by default. Your chosen lyrics scripts will provide the lyrics shown in the Lyrics applet in the Context pane.

    Skripty pro skriptovatelné služby

    Scriptable services, if enabled, will show up in the Internet Services in the Collections pane. Many collections of streams are available, in many languages, and from many sources.

    Spravovat skripty

    At bottom of the configuration dialog are two options:

    • Automatically update built-in scripts
    Automatically download and install updates for the built-in scripts from the Amarok website if available. Enable if you usually have a working Internet connections, and want your scripts automatically updated. This will not update user-supplied scripts from KDE-apps.org.
    • Manage Scripts button
    Browse, install and uninstall user-supplied scripts; also search, sort and rate the scripts in the Amarok Add-on Installer.
    Instalátor doplňků
    Amarok Script Manager

    Using the Add-on Installer, one can install the latest user-contributed Amarok scripts. There are also options to search, sort and rate the scripts.

    The Install Scripts and Uninstall buttons can be used to manage scripts. One can install script packages of type amarokscript.tar, amarokscript.tar.bz2, amarokscript.tar.gz

    Informace o skriptu

    Learn more about a script using the button.

    A script can also be executed directly in the Amarok Script Console. This is activated by selecting the Script Console and confirm the selection by hitting either the OK or the Apply button. To deactivate the Script Console deselect it and confirm again.

    large
    large