Archive:Plasma/FAQ/4.3: Difference between revisions

From KDE UserBase Wiki
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Welcome_to_KDE_UserBase|Home]] >> [[Applications]] >> [[Applications/Desktop|Desktop]] >> [[Plasma]]
<languages />


 
'''Plasma''' is one of the key technologies of KDE SC 4 (also known as the "Pillars of KDE"), and one of the most visible to users. As Plasma treats the user interface differently than a traditional desktop, there may be confusion as to what Plasma is, what it does, and how to perform common tasks.  
{{Template:I18n/Language Navigation Bar|Plasma/FAQ/4.3}}
 
'''Plasma''' is one of the key technologies of KDE 4 (also known as the "Pillars of KDE"), and one of the most visible to users. As Plasma treats the user interface differently than a traditional desktop, there may be confusion as to what Plasma is, what it does, and how to perform common tasks.  


This document attempts to address these problems by providing answers to the most common questions.
This document attempts to address these problems by providing answers to the most common questions.


{{Info|The information presented here covers Plasma in KDE 4.3. For older versions you can turn to the [[Plasma/FAQ/4.2|KDE 4.2 specific page]], [[Plasma/FAQ/4.1|KDE 4.1 specific page]] or the [[Plasma/FAQ/4.0|KDE 4.0 one]]}}
{{Info|The information presented here covers Plasma in KDE SC 4.3. For older versions you can turn to the [[Plasma/FAQ/4.2|KDE 4.2 specific page]], [[Plasma/FAQ/4.1|KDE 4.1 specific page]] or the [[Plasma/FAQ/4.0|KDE 4.0 one]]}}


=== General Questions ===
=== General Questions ===
Line 15: Line 12:




Plasma provides the desktop interface for KDE 4, including the application launcher (start menu), the desktop and the desktop panel (often referred to simply as the task bar). However Plasma is more than just this familiar collection of utilities, it is a common framework for creating integrated interfaces. It is flexible enough to provide interfaces for mobile devices, media centres and desktop computers; to support the traditional desktop metaphor as well as well as designs that haven't yet been imagined.
Plasma is the desktop interface for KDE SC 4, including the application launcher (start menu), the desktop and the desktop panel (often referred to simply as the task bar). However Plasma is more than just this familiar collection of utilities, it is a common framework for creating integrated interfaces. It is flexible enough to provide interfaces for mobile devices, media centres and desktop computers; to support the traditional desktop metaphor as well as well as designs that haven't yet been imagined.


====What is wrong with the current desktop technology?====
====What is wrong with the current desktop technology?====
Line 27: Line 24:
====How does Plasma work?====
====How does Plasma work?====


Plasma's components are widgets called ''[[Plasmoids and containments|Plasmoids]]''. Plasmoids can take on a variety of functions, ranging from displaying your desktop and associated wallpaper, showing your laptop's battery level, displaying your plugged in devices, and drawing the taskbar: basically, they are small applications that live on the desktop. Plasmoids can be grouped together in "containers" called containments. On a default desktop, there are two main elements: the Panel and the desktop itself. Both are containments in the Plasma sense.
Plasma's components are widgets called [[Special:myLanguage/Plasmoids and containments|Plasmoids]]. Plasmoids can take on a variety of functions, ranging from displaying your desktop and associated wallpaper, showing your laptop's battery level, displaying your plugged in devices, and drawing the taskbar: basically, they are small applications that live on the desktop. Plasmoids can be grouped together in "containers" called containments. On a default desktop, there are two main elements: the Panel and the desktop itself. Both are containments in the Plasma sense.


====It doesn't sound too new... other operating systems have done that.====
====It doesn't sound too new... other operating systems have done that.====
Line 35: Line 32:
====Kicker and Kdesktop were working fine in KDE 3. Why did you have to change that?====
====Kicker and Kdesktop were working fine in KDE 3. Why did you have to change that?====


Especially regarding kicker, there was the important issue of maintainability. The code was in place since the KDE 2 days, and it was difficult to add new features without breaking others. In the end, to proceed forward the only viable option was to start anew from scratch.  
Especially regarding '''Kicker''', there was the important issue of maintainability. The code was in place since the KDE 2 days, and it was difficult to add new features without breaking others. In the end, to proceed forward the only viable option was to start anew from scratch.  


====I can't find my favorite <insert feature here>!====
====I can't find my favorite <insert feature here>!====


Don't forget that Plasma is still in heavy development and that KDE 3 was an extremely polished codebase: it took seven years to get to that, while Plasma is much younger. With time, the Plasma developers plan on reintroducing features that are missing and fix regressions. As KDE progresses through the KDE4 cycle, Plasma will improve with it.
Don't forget that the Plasma Desktop is still in heavy development and that KDE 3 was an extremely polished codebase: it took seven years to get to that, while Plasma is much younger. With time, the Plasma developers plan on reintroducing features that are missing and fix regressions. As it progresses through the KDE SC 4.x cycle, Plasma will improve with it.


====Why was the way the desktop operates changed?====
====Why was the way the desktop operates changed?====
Line 48: Line 45:


That is not entirely correct. You can have icons and launchers (shortcuts) by dragging them from Dolphin or the K-menu. What has changed is that the desktop will no longer display the contents of the Desktop folder.
That is not entirely correct. You can have icons and launchers (shortcuts) by dragging them from Dolphin or the K-menu. What has changed is that the desktop will no longer display the contents of the Desktop folder.
However, you can show an arbitrary number of folders (local or remote) on your desktop view, instead of being forced to display only the contents of the "Desktop" folder. To do so, the Folder View applet comes into play.
However, you can show an arbitrary number of folders (local or remote) on your desktop view, instead of being forced to display only the contents of the "Desktop" folder. To do so, the '''Folder View''' applet comes into play.


Also, should you wish, you can replicate the "icons on desktop" paradigm with minimal effort.
Also, should you wish, you can replicate the "icons on desktop" paradigm with minimal effort.
Line 54: Line 51:
====What is the Folder View applet?====
====What is the Folder View applet?====


The Folder View applet, like its name says, is used to display items (folders, files) from a directory. Such a directory can be either a local one residing on your computer, but also a remote FTP, SSH, or SMB share. In the future, it will even contain results from Nepomuk searches and tagging.  
The '''Folder View''' applet, like its name says, is used to display items (folders, files) from a directory. Such a directory can be either a local one residing on your computer, but also a remote FTP, SSH, or SMB share. In the future, it will even contain results from Nepomuk searches and tagging.  


You can choose to view either all files, or filter either by specific regular expressions (e.g., all files with a certain extension) or by file type (for example, just images).
You can choose to view either all files, or filter either by specific regular expressions (e.g., all files with a certain extension) or by file type (for example, just images).
Line 60: Line 57:
This applet also supports basic file management properties (moving, copying, cutting and pasting for example), and you can have as many as you want on your desktop.  
This applet also supports basic file management properties (moving, copying, cutting and pasting for example), and you can have as many as you want on your desktop.  


Lastly, you can use one Folder View as the whole desktop, effectively replicating the "old style" paradigm.
Lastly, you can use one '''Folder View''' as the whole desktop, effectively replicating the "old style" paradigm.




====What's the deal with Kickoff (the new K Menu) ? ====
====What's the deal with Kickoff (the new K Menu) ? ====


During the development of KDE 4.0, different approaches for a [[Plasma application launchers | K menu (application launcher)]] were tried. Some projects, like [[Raptor]], were ambitious but there was no way they could be completed on time. At the time, one developer ported SUSE Linux's application launcher ([[Kickoff]]) to the new KDE architecture. As it was the most ready and feature complete (not to mention the product of usability testing) it was chosen to be the default menu.
During the development of KDE 4.0, different approaches for a [[Special:myLanguage/Plasma application launchers | K menu (application launcher)]] were tried. Some projects were ambitious but there was no way they could be completed on time. At the time, one developer ported SUSE Linux's application launcher ([[Special:myLanguage/Kickoff|Kickoff]]) to the new KDE desktop architecture. As it was the most ready and feature complete (not to mention the product of usability testing) it was chosen to be the default menu.
If you don't like it, the traditional K-menu is available as well - right-click onto the K Menu to find an option "traditional style". Also, some alternative menu systems have been announced ([[Lancelot]], [[Raptor]]), and some, such as Lancelot, are ready for daily usage.
If you don't like it, the traditional K-menu is available as well - right-click onto the K Menu to find an option "traditional style". Also, some alternative menu systems have been announced and some, such as [[Special:myLanguage/Lancelot|Lancelot]], are ready for daily usage and offer exciting new features.


====What is KRunner?====
====What is KRunner?====


[[KRunner]] is the versatile mini-command line you can activate by pushing "Alt-F2" or by selecting "Run Command" from the desktop contextual menu. It can search for applications, bookmarks, even sessions basing on your input, show system activity and even do simple arithmetic calculations.
[[Special:myLanguage/KRunner|KRunner]] is the versatile mini-command line you can activate by pushing <keycap>Alt + F2</keycap> or by selecting <menuchoice>Run Command</menuchoice> from the desktop contextual menu. It can search for applications, bookmarks, even sessions basing on your input, show system activity and even do simple arithmetic calculations.


KRunner's functionality can be extended through the use of plugins ("runners").
'''KRunner's''' functionality can be extended through the use of plugins ("runners").


====What are the "cashews"?====
====What are the "cashews"?====
Line 81: Line 78:
====Please provide an option to disable the upper right cashew. ====
====Please provide an option to disable the upper right cashew. ====


Although putting an option to disable the cashew for desktops sounds reasonable, from a coding point of view it would introduce unnecessary complexity and would break the design. What has been suggested is, since the destkop itself (a containment) is handled by plugins, to write a plugin that would draw the desktop without the cashew itself. As a matter of fact, some distributions ship already a "Desktop without cashew" plugin.
Although putting an option to disable the cashew for desktops sounds reasonable, from a coding point of view it would introduce unnecessary complexity and would break the design. What has been suggested is, since the desktop itself (a containment) is handled by plugins, to write a plugin that would draw the desktop without the cashew itself. As a matter of fact, some distributions ship already a "Desktop without cashew" plugin.


====What is the Zooming User Interface (ZUI)?====
====What is the Zooming User Interface (ZUI)?====


The Zooming User Interface, or ZUI, is another component of Plasma. It enables the user to group different groups of plasmoids together, and to quickly switch between one and another using a zoom-and-pan approach. Notice that at the time, although significant improvements have been made, this feature is still under heavy development and may be fully functional only with later KDE 4.x releases.
The Zooming User Interface, or ZUI, is another component of Plasma. It enables the user to group different groups of plasmoids together, and to quickly switch between one and another using a zoom-and-pan approach. Notice that at the time, although significant improvements have been made, this feature is still under heavy development and may be fully functional only with later KDE SC 4.x releases.


====How does the ZUI work?====
====How does the ZUI work?====
Line 108: Line 105:
====Can I place icons on the desktop?====
====Can I place icons on the desktop?====


Of course you can. Dragging an icon from Dolphin or Konqueror to the desktop will work. Notice that dragging on the desktop will not actually create a file there, just a link to it.  
Of course you can. Dragging an icon from '''Dolphin''' or '''Konqueror''' to the desktop will work. Notice that dragging on the desktop will not actually create a file there, just a link to it.  


To display the contents of your Desktop folder, or any other folder, use the Folder View applet.
To display the contents of your Desktop folder, or any other folder, use the '''Folder View''' applet.


Alternatively, right-click on an empty area of the desktop, select "Desktop Settings" and in the dialog that will pop up locate the "Desktop Activity" text. Click on the "type" combo box and select "Folder View". Click OK and you will have a Folder View applet as desktop (showing the contents of the Desktop folder by default), like the "old style" paradigm.
Alternatively, right-click on an empty area of the desktop, select <menuchoice>Desktop Settings</menuchoice> and in the dialog that will pop up locate the <menuchoice>Desktop Activity</menuchoice> text. Click on the '''type''' combo box and select <menuchoice>Folder View</menuchoice>. Click <menuchoice>OK</menuchoice> and you will have a '''Folder View''' applet as desktop (showing the contents of the Desktop folder by default), like the "old style" paradigm.


====I am using two screens, and I used to have kicker over the two displays. Can I do that with Plasma?====
{{Tip|1=If your widgets are locked, you must first unlock them, using the right-click menu}}
 
====I am using two screens, and I used to have Kicker over the two displays. Can I do that with Plasma?====


No. The reason is that having a panel over two displays adds a great deal of complexity, especially when the two displays have different resolution. As a result of this added complexity, this feature would not be guaranteed to work in all cases, hence it was not implemented.
No. The reason is that having a panel over two displays adds a great deal of complexity, especially when the two displays have different resolution. As a result of this added complexity, this feature would not be guaranteed to work in all cases, hence it was not implemented.
====Can I put the panel on only one screen?====
All Plasma panels live in one screen. If you want panels on multiple screens, you can add panels and drag them to your preferred location using the panel controller you get when clicking on the Plasma icon in "Unlocked" mode.


====How can I add applets to the panel?====
====How can I add applets to the panel?====


''Method 1'': Open the Add Widgets dialog in the Plasma cashew (upper right corner of the screen) then select the widget of your liking and '''drag it directly''' (don't double click or use the Add Widget button) to the panel.  
''Method 1'': Open the <menuchoice>Add Widgets</menuchoice> dialog in the Plasma cashew (upper right corner of the screen) then select the widget of your liking and ''drag it directly'' (don't double click or use the <menuchoice>Add Widget</menuchoice> button) to the panel.  


''Method 2'': Drag an applet from the desktop to the panel.  
''Method 2'': Drag an applet from the desktop to the panel.  


''Method 3'': Click on the cashew on the panel, and select "Add widgets". Once you have selected the applet, it will be automatically added to the panel.
''Method 3'': Click on the cashew on the panel, and select <menuchoice>Add widgets</menuchoice>. Once you have selected the applet, it will be automatically added to the panel.


====Can I move the applets on the panel?====
====Can I move the applets on the panel?====


To do so, open up the panel controller (by clicking on the cashew or by right clicking on the panel and selecting "Panel Settings") and hover the mouse cursor over the applets. Its shape will turn into four arrows, and you'll be able to rearrange the applets as you wish.
To do so, open up the panel controller (by clicking on the cashew or by right clicking on the panel and selecting <menuchoice>Panel Settings</menuchoice>) and hover the mouse cursor over the applets. Its shape will turn into four arrows, and you'll be able to rearrange the applets as you wish.


Lydia Pintscher's blog has a [http://blog.lydiapintscher.de/2008/07/05/move-your-applets-freely/ video showing movement in action]. Another one is available [http://aikurn.wordpress.com/2008/07/05/its-confirmed-widgets-can-be-moved/ on Aikurn's blog]. Aikurn has also made [http://www.youtube.com/watch?v=OrouuYxGu3E an annotated video.]
Lydia Pintscher's blog has a [http://blog.lydiapintscher.de/2008/07/05/move-your-applets-freely/ video showing movement in action]. Another one is available [http://aikurn.wordpress.com/2008/07/05/its-confirmed-widgets-can-be-moved/ on Aikurn's blog]. Aikurn has also made [http://www.youtube.com/watch?v=OrouuYxGu3E an annotated video.]
====How do I move, rotate or resize an applet on the desktop?====
First of all, hover over the applet you want to resize. The ''applet handle'' will appear.
The applet handle takes care of resize, rotate and move.
* ''To move an applet'': Click on the handle, then drag the applet around.
* ''To rotate an applet'':  Click on the curved arrow then drag to rotate
* ''To resize an applet'': Click on the square icon and then drag to resize the applet. You can constrain the resize operation to the applet's aspect ratio by holding down the Ctrl key.


====How can I change the height and the size of the panel?====
====How can I change the height and the size of the panel?====


Click on the panel cashew (the small icon on the right side of the panel) to open the panel configuration interface. By clicking on "Screen Edge", you can position the panel on any of the edges of the screen. Clicking on height and dragging increases or decreases the size of the panel.  
Click on the panel cashew (the small icon on the right side of the panel) to open the panel configuration interface. By clicking on <menuchoice>Screen Edge</menuchoice>, you can position the panel on any of the edges of the screen. Clicking on height and dragging increases or decreases the size of the panel.  


The arrows on the sides of the panel define its size: there are two, which define "minimum" and "maximum" sizes. The maximum size is the size at which the panel can expand when items are added, while the minimum size is the minimum size the panel can have. If they are set differently, the panel will readjust its size depending on the contents.
The arrows on the sides of the panel define its size: there are two, which define "minimum" and "maximum" sizes. The maximum size is the size at which the panel can expand when items are added, while the minimum size is the minimum size the panel can have. If they are set differently, the panel will readjust its size depending on the contents.


Under "More Options" there are additional options to align the panel and configure its behavior.
Under <menuchoice>More Options</menuchoice> there are additional options to align the panel and configure its behavior.


====Can I auto-hide the panel?====
====Can I auto-hide the panel?====


Open the panel controller, select "More Options", then click on the relevant option.
Open the panel controller, select <menuchoice>More Options</menuchoice>, then click on the relevant option.


====How can I remove a panel?====
====How can I remove a panel?====


Click on the panel cashew, click on "More settings", then select "Remove this Panel". Alternatively you can right click on the panel itself, select "Panel options" and choose "Remove this Panel".
Click on the panel cashew, click on <menuchoice>More settings</menuchoice>, then select <menuchoice>Remove this Panel</menuchoice>. Alternatively you can right click on the panel itself, select <menuchoice>Panel options</menuchoice> and choose <menuchoice>Remove this Panel</menuchoice>.
 
 


====General Panel Configuration Help====
====General Panel Configuration Help====


''[http://forum.kde.org/howto-panel-in-kde-4-1-2-t-6902.html This forum page]'' gives an illustrated guide to configuring the panel.
[http://forum.kde.org/howto-panel-in-kde-4-1-2-t-6902.html This forum page] gives an illustrated guide to configuring the panel.


====I heard that you can use OS X's widgets with Plasma. Is this true? ====  
====I heard that you can use OS X's widgets with Plasma. Is this true? ====   
   
Yes, Plasma can use OS X's widgets. Work has been done to implement also Javascript-based widgets (reverse engineered due to Apple's license).
Yes, Plasma can use OS X's widgets. Work has been done to implement also Javascript-based widgets (reverse engineered due to Apple's license).
====How do I move, rotate or resize an applet on the desktop?====
First of all, hover over the applet you want to resize. The ''applet handle'' will appear.
The applet handle takes care of resize, rotate and move.
* ''To move an applet'': Click on the handle, then drag the applet around.
* ''To rotate an applet'':  Click on the curved arrow then drag to rotate
* ''To resize an applet'': Click on the square icon and then drag to resize the applet. You can constrain the resize operation to the applet's aspect ratio by holding down the <keycap>Ctrl</keycap> key.


====My widgets are hidden under the windows. How can I show them?====
====My widgets are hidden under the windows. How can I show them?====


You can bring all the widgets to the front by pushing Ctrl-F12, which will bring the Plasma Dashboard to the front. When you are done, you can either push the Esc key or select the "Hide Dashboard" option from the cashew.  
You can bring all the widgets to the front by pushing <keycap>Ctrl + F12</keycap>, which will bring the Plasma Dashboard to the front. When you are done, you can either push the <keycap>Esc</keycap> key or select the <menuchoice>Hide Dashboard</menuchoice> option from the cashew.  


====How can I lock the positions of the widgets?====
====How can I lock the positions of the widgets?====


''Method 1'': Right click on an empty area of the desktop and select "Lock Widgets" from the contextual menu. If you want to reverse that, right click again and select "Unlock Widgets". The same option is available if you right-click on the panel.  
''Method 1'': Right click on an empty area of the desktop and select <menuchoice>Lock Widgets</menuchoice> from the contextual menu. If you want to reverse that, right click again and select <menuchoice>Unlock Widgets</menuchoice>. The same option is available if you right-click on the panel.  


''Method 2'': Select "Lock Widgets" from the Plasma cashew on the upper right corner or from the panel controller.
''Method 2'': Select <menuchoice>Lock Widgets</menuchoice> from the Plasma cashew on the upper right corner or from the panel controller.


====How do I remove widgets?====
====How do I remove widgets?====


If they're on the panel, right click on the widget and select "Remove this...". If the widgets are on the desktop, you have different options:
If they're on the panel, right click on the widget and select <menuchoice>Remove this...</menuchoice>. If the widgets are on the desktop, you have different options:


* If you hover over them, clicking the X on the applet handle will remove them;
* If you hover over them, clicking the <menuchoice>X</menuchoice> on the applet handle will remove them;
* If you use the Add Widget dialog, you can click on the minus symbol icon next to the widget name to remove it.
* If you use the <menuchoice>Add Widget</menuchoice> dialog, you can click on the minus symbol icon next to the widget name to remove it.


====How do I switch between Kickoff and the old style menu?====
====How do I switch between Kickoff and the old style menu?====


Right click on the menu icon and select "Switch to Classic Menu Style" (if using Kickoff) or "Switch to Kickoff Menu Style" (if using the classic menu). Alternatively, you can add either type of menu using the Add Applets dialog.
Right click on the menu icon and select <menuchoice>Switch to Classic Menu Style</menuchoice> (if using '''Kickoff''') or <menuchoice>Switch to Kickoff Menu Style</menuchoice> (if using the classic menu). Alternatively, you can add either type of menu using the <menuchoice>Add Applets</menuchoice> dialog.


Aikurn has [http://www.youtube.com/watch?v=O6X50EwaFe8 a video] showing how to switch between the different styles.
Aikurn has [http://www.youtube.com/watch?v=O6X50EwaFe8 a video] showing how to switch between the different styles.
Line 190: Line 196:
====How can I add/remove an activity?====
====How can I add/remove an activity?====


''Adding an activity'': Zoom out from your current desktop view by clicking on the desktop view cashew (the icon in the top right corner) and selecting ''Zoom out''. You see a toolbar under your current desktop. Click on "Add Activity" to create a new desktop view.
''Adding an activity'': Zoom out from your current desktop view by clicking on the desktop view cashew (the icon in the top right corner) and selecting <menuchoice>Zoom out</menuchoice>. You see a toolbar under your current desktop. Click on <menuchoice>Add Activity</menuchoice> to create a new desktop view.


''Removing an activity'': Zoom out from your current desktop view and select the red cross from the toolbar that will appear to remove the activity.  
''Removing an activity'': Zoom out from your current desktop view and select the red cross from the toolbar that will appear to remove the activity.  


'''Note:''' You must Unlock Widgets (Ctrl+L) before you can remove any activities.
'''Note:''' You must <menuchoice>Unlock Widgets</menuchoice> (<keycap>Ctrl + L</keycap>) before you can remove any activities.


KDE Forums user Fengshaun has made a [http://blip.tv/file/1640432/ screencast showing ZUI usage].
KDE Forums user Fengshaun has made a [http://blip.tv/file/1640432/ screencast showing ZUI usage].


====How can I quickly move between Activities?====
====How can I quickly move between Activities?====
The ZUI method is rather slow, so a better way is to use an Activity Bar.  A short [http://forum.kde.org/easy-activity-switching-t-22488.html how-to here] explains exactly what you need to do.
The ZUI method is rather slow, so a better way is to use an Activity Bar.  A short [http://forum.kde.org/easy-activity-switching-t-22488.html how-to here] explains exactly what you need to do.


Line 205: Line 212:
In addition to the mouse, there is a number of shortcuts available:
In addition to the mouse, there is a number of shortcuts available:


* Lock widgets: Ctrl-L
* Lock widgets: <keycap>Ctrl + L</keycap>
* Zoom out: Ctrl- -
* Zoom out: <keycap>Ctrl + -</keycap>
* Zoom in: Ctrl- = or Ctrl-+
* Zoom in: <keycap>Ctrl + =</keycap> or <keycap>Ctrl + +</keycap>
* Next applet: Ctrl-N
* Next applet: <keycap>Ctrl + N</keycap>
* Previous applet: Ctrl-P
* Previous applet: <keycap>Ctrl + P</keycap>
* Add activity: Shift-Ctrl-A
* Add activity: <keycap>Shift-Ctrl + A</keycap>
* Next activity: Shift-Ctrl-N
* Next activity: <keycap>Shift-Ctrl + N</keycap>
* Previous activity: Shift-Ctrl-P
* Previous activity: <keycap>Shift-Ctrl + P</keycap>
* Applet settings: Ctrl-S
* Applet settings: <keycap>Ctrl + S</keycap>
* Remove applet: Ctrl-R
* Remove applet: <keycap>Ctrl + R</keycap>


To change shortcuts, click on the desktop cashew and select "Shortcut settings".
To change shortcuts, click on the desktop cashew and select "Shortcut settings".
Line 220: Line 227:
==== How can I associate a keyboard shortcut with an applet? ====
==== How can I associate a keyboard shortcut with an applet? ====


Simply select an applet's settings (the wrench icon on the applet handle) and then click on "Kyeboard Shortcut". You will then be able to define a keyboard shortcut for your applet. Notice that some applets do not offer this feature (generally the ones that have no configuration).
Simply select an applet's settings (the wrench icon on the applet handle) and then click on <menuchoice>Keyboard Shortcut</menuchoice>. You will then be able to define a keyboard shortcut for your applet. Notice that some applets do not offer this feature (generally the ones that have no configuration).


==== Can the Dashboard show widgets other than those on my desktop? ====
==== Can the Dashboard show widgets other than those on my desktop? ====


Yes, it can. To configure it, click on the desktop cashew and zoom out. Choose "Configure Plasma" from the toolbox that it appears, and check the "Use a separate dashboard" option.  
Yes, it can. To configure it, click on the desktop cashew and zoom out. Choose <menuchoice>Configure Plasma</menuchoice> from the toolbox that it appears, and check the <menuchoice>Use a separate dashboard</menuchoice> option.  
Click on OK and you will have a different dashboard than your desktop when you access it.
Click on <menuchoice>OK</menuchoice> and you will have a different dashboard than your desktop when you access it.


==== How can I use virtual desktops as activities ? ====
==== How can I use virtual desktops as activities ? ====


Zoom out by clicking on the desktop cashew and a new toolbox will open. Click on "Configure Plasma" then check the box "Different activity for each virtual desktop". Click on OK and you are done.
Zoom out by clicking on the desktop cashew and a new toolbox will open. Click on <menuchoice>Configure Plasma</menuchoice> then check the box <menuchoice>Different activity for each virtual desktop</menuchoice>. Click on OK and you are done.


====Notifications take up too much screen - can I get rid of them?====
====Notifications take up too much screen - can I get rid of them?====


For those who do not like it, there is a simple way to disable them. Right click on the system tray notification area (the "i" icon) and select "System Tray Settings".  
For those who do not like it, there is a simple way to disable them. Right click on the system tray notification area (the '''i''' icon) and select <menuchoice>System Tray Settings</menuchoice>.  


There you will have the options of disabling notifications for applications or for jobs (such as file transfers) by unchecking the relevant check boxes.
There you will have the options of disabling notifications for applications or for jobs (such as file transfers) by unchecking the relevant check boxes.
Line 241: Line 248:
====I don't like the default look of the panel and other Plasma components. Can I change that?====
====I don't like the default look of the panel and other Plasma components. Can I change that?====


Yes, the ability to change the look of Plasma was planned since the beginning. Plasma can use "themes", which are essentially a number of SVG images and files specifying the colors, to change its appearance. A number of themes are already available on kde-look.org.
Yes, the ability to change the look of Plasma was planned since the beginning. Plasma can use "themes", which are essentially a number of SVG images and files specifying the colors, to change its appearance. A number of themes are already available on [http://kde-look.org kde-look.org].


====How can I change my Plasma theme?====
====How can I change my Plasma theme?====


Right click on your current desktop, select "Desktop Settings" (alternatively, you can select the same option from the desktop cashew) and you will find the option under "Desktop Theme". You can also download new themes directly from there by clicking the "New Theme" button, using Get Hot New Stuff (GHNS).
Right click on your current desktop, select <menuchoice>Desktop Settings</menuchoice> (alternatively, you can select the same option from the desktop cashew) and you will find the option under <menuchoice>Desktop Theme</menuchoice>. You can also download new themes directly from there by clicking the <menuchoice>New Theme</menuchoice> button, using [[Special:mylanguage/Glossary#Get Hot New Stuff|Get Hot New Stuff]] (GHNS).


Step by step instructions, although made for KDE 4.1, (including screenshots) [http://aikurn.wordpress.com/2008/07/01/itty-bitty-tip-how-to-change-the-plasma-theme/ are available on Aikurn's blog].
Step by step instructions, although made for KDE 4.1, (including screenshots) [http://aikurn.wordpress.com/2008/07/01/itty-bitty-tip-how-to-change-the-plasma-theme/ are available on Aikurn's blog].
Line 257: Line 264:
====Plasma crashed, how can I bring my desktop back?====
====Plasma crashed, how can I bring my desktop back?====


Normally Plasma automatically restarts in the event of a crash. If this doesn't happen, open KRunner by pushing Alt-F2 (it should be still running) and type "plasma-desktop". Plasma will be restarted.
Normally Plasma automatically restarts in the event of a crash. If this doesn't happen, open '''KRunner''' by pushing <keycap>Alt + F2</keycap> (it should be still running) and type "plasma-desktop". Plasma will be restarted.


====My panel is gone, how do I get it back?====
====My panel is gone, how do I get it back?====
kquitapp plasma-desktop; rm $KDEHOME/share/config/plasma-desktop-appletsrc; plasma-desktop
 
{{Input|1=kquitapp plasma-desktop; rm $KDEHOME/share/config/plasma-desktop-appletsrc; plasma-desktop}}


This deletes your plasma settings, so you'll get the default configuration back.  
This deletes your plasma settings, so you'll get the default configuration back.  
If running all the 3 commands at once doesn't work, try typing them in manually and wait a few seconds before running the next command.
If running the 3 commands at once doesn't work, try typing them in manually and wait a few seconds before running the next command.


(Note that the $KDEHOME environment variable may not be set. Try ~/.kde (Fedora, Kubuntu Intrepid, Debian, upstream default) or ~/.kde4 (OpenSUSE, Kubuntu Hardy and several others).)
(Note that the $KDEHOME environment variable may not be set. Try ~/.kde (Fedora, Kubuntu Intrepid, Debian, upstream default) or ~/.kde4 (OpenSUSE, Kubuntu Hardy and several others).)
Line 273: Line 281:
====I experience extreme slowness when using Plasma with the NVIDIA binary driver. ====
====I experience extreme slowness when using Plasma with the NVIDIA binary driver. ====


This is NVIDIA's fault entirely, due to their driver not supporting correctly the XRender X11 extension, and it also affects other parts of KDE such as [[Konsole]]. See [http://vizzzion.org/?blogentry=820 this blog entry] on how to report issues upstream to NVIDIA. [http://techbase.kde.org/User:Lemma/GPU-Performance  This page] contains a few suggestions on how to improve performance.
This is NVIDIA's fault entirely, due to their driver not supporting correctly the XRender X11 extension, and it also affects other parts of KDE SC such as [[Special:mylanguage/Konsole|Konsole]]. See [http://vizzzion.org/?blogentry=820 this blog entry] on how to report issues upstream to NVIDIA. [http://techbase.kde.org/User:Lemma/GPU-Performance  This page] contains a few suggestions on how to improve performance.


NVIDIA has released the 18x.xx series driver that can improve performance dramatically with Plasma and KDE4 in general.
NVIDIA has released the 18x.xx series driver that can improve performance dramatically with the Plasma Desktop and KDE SC 4.x in general.


Users who have a NVIDIA 6 or 7 series card should add the following lines to their xorg.conf in the "Screen" section, which may improve performance. You don't need to add these lines if you have a 8/9 or above series NVIDIA card, since they're enabled by default.
Users who have a NVIDIA 6 or 7 series card should add the following lines to their xorg.conf in the "Screen" section, which may improve performance. You don't need to add these lines if you have a 8/9 or above series NVIDIA card, since they're enabled by default.


Option "PixmapCacheSize" "5000000"
{{Input|1=Option "PixmapCacheSize" "5000000"
Option "AllowSHMPixmaps" "0"
Option "AllowSHMPixmaps" "0"}}


There are some other options you can try, which may improve things if you get poor Desktop Effects performance.
There are some other options you can try, which may improve things if you get poor Desktop Effects performance.


Go to SystemSettings>Desktop>Desktop Effects>Advanced, you will see "OpenGL Options", make sure "Bilinear" or "Nearest (fastest)" is set as the "Texture Filter" option. You can also try turning off "Use VSync" there as well.
Go to <menuchoice>SystemSettings -> Desktop -> Desktop Effects -> Advanced</menuchoice>, you will see <menuchoice>OpenGL Options</menuchoice>, make sure <menuchoice>Bilinear</menuchoice> or <menuchoice>Nearest (fastest)</menuchoice> is set as the <menuchoice>Texture Filter</menuchoice> option. You can also try turning off <menuchoice>Use VSync</menuchoice> there as well.


====Folder View and other plasmoids look badly rendered with an ATI video card and the open source radeon driver. ====
====Folder View and other plasmoids look badly rendered with an ATI video card and the open source radeon driver. ====
Line 292: Line 300:
To make the switch, edit your xorg.conf file (make a backup just in case) and locate the Device section for your graphics card. Add the line
To make the switch, edit your xorg.conf file (make a backup just in case) and locate the Device section for your graphics card. Add the line


Option "AccelMethod" "EXA"
{{Input|1=Option "AccelMethod" "EXA"}}


before the "EndSection" line. If there is already a line with AccelMethod, change it from XAA to EXA. Save the file and restart the X server.
before the "EndSection" line. If there is already a line with AccelMethod, change it from XAA to EXA. Save the file and restart the X server.
Line 301: Line 309:


===Add an application launcher to the panel===
===Add an application launcher to the panel===
If you use kickoff as your menu, right-click on the application icon, and select Add to Panel.  If you use [[Lancelot]] simply drag the application onto the panel - you may need to hold it there for a second or so before letting go.
 
If you use '''Kickoff''' as your menu, right-click on the application icon, and select <menuchoice>Add to Panel</menuchoice>.  If you use [[Special:myLanguage/Lancelot|Lancelot]] simply drag the application onto the panel - you may need to hold it there for a second or so before letting go.


===Add a launch menu to the panel===
===Add a launch menu to the panel===
[[Lancelot]] makes this possible.  Click on the menu launcher, then drag Applications as described above.  When the popup menu appears, select 'Lancelot part'.
[[Special:myLanguage/Lancelot|Lancelot]] makes this possible.  Click on the menu launcher, then drag Applications as described above.  When the popup menu appears, select <menuchoice>Lancelot part</menuchoice>.


Various parts of the Lancelot menu can be dragged to the panel in this way.  Read [http://lancelot.fomentgroup.org/docs:basic-parts this description] of how to use it.
Various parts of the '''Lancelot''' menu can be dragged to the panel in this way.  Read [http://lancelot.fomentgroup.org/docs:basic-parts this description] of how to use it.


'Favorites' may be a good choice for adding to the panel
'Favorites' may be a good choice for adding to the panel
Line 315: Line 324:


=== Right-click the panel when your task bar is full ===
=== Right-click the panel when your task bar is full ===
To make some changes to the panel you need to right-click on it - and if you have open applications that may not be easy,  The workaround for this problem is to use the panel cashew to bring up the panel settings, then you can right-click anywhere on the panel, including on application tabs, and the command will go to the panel, not the application.
To make some changes to the panel you need to right-click on it - and if you have open applications that may not be easy,  The workaround for this problem is to use the panel cashew to bring up the panel settings, then you can right-click anywhere on the panel, including on application tabs, and the command will go to the panel, not the application.
   
   
=== Re-arrange the application tabs on your task bar ===
=== Re-arrange the application tabs on your task bar ===
Right-click on an empty part of the task bar (or use the method described above) and select Task Manager Settings. In the 'Sorting' combo-box, select 'Manual''OK' to close it.  Now you can re-arrange your task icons by holding down Alt and dragging the tabs to their new order.  (If you use this alt-drag while the panel config panel is open the whole group of application tabs will move as one.)
 
Right-click on an empty part of the task bar (or use the method described above) and select <menuchoice>Task Manager Settings</menuchoice>. In the '''Sorting''' combo-box, select <menuchoice>Manual</menuchoice><menuchoice>OK</menuchoice> to close it.  Now you can re-arrange your task icons by holding down <keycap>Alt</keycap> and dragging the tabs to their new order.  (If you use this alt-drag while the panel config panel is open the whole group of application tabs will move as one.)


===Watch some Screencasts===
===Watch some Screencasts===
''[http://forum.kde.org/plasma-screencasts-t-29687.html This forum page]'' has links to screencasts that will help you understand Desktop Settings, Panel Settings and the Zooming User Interface (a.k.a. the Cashew).
 
[http://forum.kde.org/plasma-screencasts-t-29687.html This forum page] has links to screencasts that will help you understand Desktop Settings, Panel Settings and the Zooming User Interface (a.k.a. the Cashew).


=== Miscellaneous tips ===
=== Miscellaneous tips ===
Line 327: Line 339:
Some alternatives for those who like a sparse desktop:
Some alternatives for those who like a sparse desktop:


1 - you can remove the panel entirely.  Open applications would be available using the ALT+TAB cycling.
1 - you can remove the panel entirely.  Open applications would be available using the <keycap>Alt + Tab</keycap> cycling.


2 - Remove the panel and add a short one at the top of the screen, to hold only the task manager
2 - Remove the panel and add a short one at the top of the screen, to hold only the task manager
Line 335: Line 347:
== Glossary ==
== Glossary ==


See the [[ Glossary ]] page.
See the [[Special:myLanguage/Glossary|Glossary]] page.


== HowTo ==
== HowTo ==


A page of [[Plasma/FAQ/HowTo | Screencasts]] to help understand Plasma
A page of [[Special:myLanguage/Plasma/FAQ/HowTo | Screencasts]] to help understand Plasma


== Thanks ==
== Thanks ==
Line 357: Line 369:
* Dipesh
* Dipesh
* Maninalift
* Maninalift
* All the anyonymous contributors
* All the anonymous contributors
 
 
 
 


{|style="text-align:right"
[[Category:Plasma]]
|'''Back to [[An_introduction_to_KDE|the Introduction page''']]
|}

Latest revision as of 15:49, 19 May 2012


Plasma is one of the key technologies of KDE SC 4 (also known as the "Pillars of KDE"), and one of the most visible to users. As Plasma treats the user interface differently than a traditional desktop, there may be confusion as to what Plasma is, what it does, and how to perform common tasks.

This document attempts to address these problems by providing answers to the most common questions.

Information

The information presented here covers Plasma in KDE SC 4.3. For older versions you can turn to the KDE 4.2 specific page, KDE 4.1 specific page or the KDE 4.0 one


General Questions

What does Plasma do?

Plasma is the desktop interface for KDE SC 4, including the application launcher (start menu), the desktop and the desktop panel (often referred to simply as the task bar). However Plasma is more than just this familiar collection of utilities, it is a common framework for creating integrated interfaces. It is flexible enough to provide interfaces for mobile devices, media centres and desktop computers; to support the traditional desktop metaphor as well as well as designs that haven't yet been imagined.

What is wrong with the current desktop technology?

Today's desktops are static. Typically they are tied to a folder in which one can find icons (application launchers), or user-placed documents and folders. Along with pictures and images as backgrounds, the current desktop doesn't go any further, or work for the user. Plasma takes a different approach, engaging the user by creating a dynamic and highly customizable environment.

I don't think it's such a good idea...

With Plasma, you can let your desktop (and accompanying support elements) act like it always did. You can have a task bar, a background image, shortcuts, etc. If you want to, however, you can use tools provided by Plasma to take your experience further, letting your desktop take shape based on what you want and need.

How does Plasma work?

Plasma's components are widgets called Plasmoids. Plasmoids can take on a variety of functions, ranging from displaying your desktop and associated wallpaper, showing your laptop's battery level, displaying your plugged in devices, and drawing the taskbar: basically, they are small applications that live on the desktop. Plasmoids can be grouped together in "containers" called containments. On a default desktop, there are two main elements: the Panel and the desktop itself. Both are containments in the Plasma sense.

It doesn't sound too new... other operating systems have done that.

The key difference here is that plasmoids can interact together. You want a better view of your laptop battery in order to find out when you are running low? You just drag it away from the taskbar and put it on the desktop. Also, applets can be resized and rotated at will, thanks to the use of Scalable Vector Graphics (SVGs). As you can see, the desktop not only interacts with you, as the user, but also with itself in new and interesting ways. You are now able to control how your workspace behaves and what it displays, in a visually pleasing and user-friendly manner. Since Plasma is the sum of its plasmoids, every element, even the desktop itself, is a widget. This allows you to move your desktop anywhere with respect to the windows (back and forward). It is no longer rooted behind everything and becomes instead another element of real interaction.

Kicker and Kdesktop were working fine in KDE 3. Why did you have to change that?

Especially regarding Kicker, there was the important issue of maintainability. The code was in place since the KDE 2 days, and it was difficult to add new features without breaking others. In the end, to proceed forward the only viable option was to start anew from scratch.

I can't find my favorite <insert feature here>!

Don't forget that the Plasma Desktop is still in heavy development and that KDE 3 was an extremely polished codebase: it took seven years to get to that, while Plasma is much younger. With time, the Plasma developers plan on reintroducing features that are missing and fix regressions. As it progresses through the KDE SC 4.x cycle, Plasma will improve with it.

Why was the way the desktop operates changed?

The idea of a Desktop folder is fundamentally a broken concept. It assumes that everything you will access there resides on a single physical directory on your disk. It may be convenient, but at the same time it greatly limits what you can do. For example, you can't use custom layouts for different desktops, as everything would be read from the directory. Also, quite often a desktop structured like that becomes a dumping ground for files and folders, without any other function.

I heard there are no more icons on the desktop...

That is not entirely correct. You can have icons and launchers (shortcuts) by dragging them from Dolphin or the K-menu. What has changed is that the desktop will no longer display the contents of the Desktop folder. However, you can show an arbitrary number of folders (local or remote) on your desktop view, instead of being forced to display only the contents of the "Desktop" folder. To do so, the Folder View applet comes into play.

Also, should you wish, you can replicate the "icons on desktop" paradigm with minimal effort.

What is the Folder View applet?

The Folder View applet, like its name says, is used to display items (folders, files) from a directory. Such a directory can be either a local one residing on your computer, but also a remote FTP, SSH, or SMB share. In the future, it will even contain results from Nepomuk searches and tagging.

You can choose to view either all files, or filter either by specific regular expressions (e.g., all files with a certain extension) or by file type (for example, just images).

This applet also supports basic file management properties (moving, copying, cutting and pasting for example), and you can have as many as you want on your desktop.

Lastly, you can use one Folder View as the whole desktop, effectively replicating the "old style" paradigm.


What's the deal with Kickoff (the new K Menu) ?

During the development of KDE 4.0, different approaches for a K menu (application launcher) were tried. Some projects were ambitious but there was no way they could be completed on time. At the time, one developer ported SUSE Linux's application launcher (Kickoff) to the new KDE desktop architecture. As it was the most ready and feature complete (not to mention the product of usability testing) it was chosen to be the default menu. If you don't like it, the traditional K-menu is available as well - right-click onto the K Menu to find an option "traditional style". Also, some alternative menu systems have been announced and some, such as Lancelot, are ready for daily usage and offer exciting new features.

What is KRunner?

KRunner is the versatile mini-command line you can activate by pushing Alt + F2 or by selecting Run Command from the desktop contextual menu. It can search for applications, bookmarks, even sessions basing on your input, show system activity and even do simple arithmetic calculations.

KRunner's functionality can be extended through the use of plugins ("runners").

What are the "cashews"?

What is commonly referred as "cashew" is the Plasma logo you can find on the default desktop, on the upper right corner, and on the panel, on the right hand side (left hand side if you use a Right-To-Left language). By clicking on them, you can access other configuration options, such as panel configuration and the Zooming User Interface (ZUI). Some of these, like the panel cashew, only appear if the widgets aren't locked (see below).

Please provide an option to disable the upper right cashew.

Although putting an option to disable the cashew for desktops sounds reasonable, from a coding point of view it would introduce unnecessary complexity and would break the design. What has been suggested is, since the desktop itself (a containment) is handled by plugins, to write a plugin that would draw the desktop without the cashew itself. As a matter of fact, some distributions ship already a "Desktop without cashew" plugin.

What is the Zooming User Interface (ZUI)?

The Zooming User Interface, or ZUI, is another component of Plasma. It enables the user to group different groups of plasmoids together, and to quickly switch between one and another using a zoom-and-pan approach. Notice that at the time, although significant improvements have been made, this feature is still under heavy development and may be fully functional only with later KDE SC 4.x releases.

How does the ZUI work?

Suppose you have three groups of plasmoids (such as widgets, application launchers, etc.) which you want arranged in specific combinations depending on what you want to do. You first group them according to your tastes, then you can switch between them by zooming out (getting a preview of all the groups) and then back in on the specific group you want to use. Notice that it is different from traditional X11 virtual desktop switching, as there is a higher degree of flexibility by using this approach, as the groups can be totally different from each other.

A very good example of this behavior is shown by this image courtesy of Half-Left from #kde on freenode.

That said, you can tie virtual desktops to ZUI activities.

Why can't I use the ZUI from Dashboard view?

That feature is a work-in-progress. We're looking into it, but can't yet say how and when it will be finished.

On multi screen setups, the ZUI operates on all screens, the Dashboard just on one. Why is that?

The workflows are different. When zooming out, the user wants to get an overview, therefore activities on all screens are zoomed out. Whereas when using the Dashboard, the user usually wants to access specific functionality and might not want to interrupt his or her workflow on other activities.

Configuration

Can I place icons on the desktop?

Of course you can. Dragging an icon from Dolphin or Konqueror to the desktop will work. Notice that dragging on the desktop will not actually create a file there, just a link to it.

To display the contents of your Desktop folder, or any other folder, use the Folder View applet.

Alternatively, right-click on an empty area of the desktop, select Desktop Settings and in the dialog that will pop up locate the Desktop Activity text. Click on the type combo box and select Folder View. Click OK and you will have a Folder View applet as desktop (showing the contents of the Desktop folder by default), like the "old style" paradigm.

Tip

If your widgets are locked, you must first unlock them, using the right-click menu


I am using two screens, and I used to have Kicker over the two displays. Can I do that with Plasma?

No. The reason is that having a panel over two displays adds a great deal of complexity, especially when the two displays have different resolution. As a result of this added complexity, this feature would not be guaranteed to work in all cases, hence it was not implemented.

Can I put the panel on only one screen?

All Plasma panels live in one screen. If you want panels on multiple screens, you can add panels and drag them to your preferred location using the panel controller you get when clicking on the Plasma icon in "Unlocked" mode.

How can I add applets to the panel?

Method 1: Open the Add Widgets dialog in the Plasma cashew (upper right corner of the screen) then select the widget of your liking and drag it directly (don't double click or use the Add Widget button) to the panel.

Method 2: Drag an applet from the desktop to the panel.

Method 3: Click on the cashew on the panel, and select Add widgets. Once you have selected the applet, it will be automatically added to the panel.

Can I move the applets on the panel?

To do so, open up the panel controller (by clicking on the cashew or by right clicking on the panel and selecting Panel Settings) and hover the mouse cursor over the applets. Its shape will turn into four arrows, and you'll be able to rearrange the applets as you wish.

Lydia Pintscher's blog has a video showing movement in action. Another one is available on Aikurn's blog. Aikurn has also made an annotated video.

How can I change the height and the size of the panel?

Click on the panel cashew (the small icon on the right side of the panel) to open the panel configuration interface. By clicking on Screen Edge, you can position the panel on any of the edges of the screen. Clicking on height and dragging increases or decreases the size of the panel.

The arrows on the sides of the panel define its size: there are two, which define "minimum" and "maximum" sizes. The maximum size is the size at which the panel can expand when items are added, while the minimum size is the minimum size the panel can have. If they are set differently, the panel will readjust its size depending on the contents.

Under More Options there are additional options to align the panel and configure its behavior.

Can I auto-hide the panel?

Open the panel controller, select More Options, then click on the relevant option.

How can I remove a panel?

Click on the panel cashew, click on More settings, then select Remove this Panel. Alternatively you can right click on the panel itself, select Panel options and choose Remove this Panel.


General Panel Configuration Help

This forum page gives an illustrated guide to configuring the panel.

I heard that you can use OS X's widgets with Plasma. Is this true?

Yes, Plasma can use OS X's widgets. Work has been done to implement also Javascript-based widgets (reverse engineered due to Apple's license).

How do I move, rotate or resize an applet on the desktop?

First of all, hover over the applet you want to resize. The applet handle will appear.

The applet handle takes care of resize, rotate and move.

  • To move an applet: Click on the handle, then drag the applet around.
  • To rotate an applet: Click on the curved arrow then drag to rotate
  • To resize an applet: Click on the square icon and then drag to resize the applet. You can constrain the resize operation to the applet's aspect ratio by holding down the Ctrl key.

My widgets are hidden under the windows. How can I show them?

You can bring all the widgets to the front by pushing Ctrl + F12, which will bring the Plasma Dashboard to the front. When you are done, you can either push the Esc key or select the Hide Dashboard option from the cashew.

How can I lock the positions of the widgets?

Method 1: Right click on an empty area of the desktop and select Lock Widgets from the contextual menu. If you want to reverse that, right click again and select Unlock Widgets. The same option is available if you right-click on the panel.

Method 2: Select Lock Widgets from the Plasma cashew on the upper right corner or from the panel controller.

How do I remove widgets?

If they're on the panel, right click on the widget and select Remove this.... If the widgets are on the desktop, you have different options:

  • If you hover over them, clicking the X on the applet handle will remove them;
  • If you use the Add Widget dialog, you can click on the minus symbol icon next to the widget name to remove it.

How do I switch between Kickoff and the old style menu?

Right click on the menu icon and select Switch to Classic Menu Style (if using Kickoff) or Switch to Kickoff Menu Style (if using the classic menu). Alternatively, you can add either type of menu using the Add Applets dialog.

Aikurn has a video showing how to switch between the different styles.

How can I add/remove an activity?

Adding an activity: Zoom out from your current desktop view by clicking on the desktop view cashew (the icon in the top right corner) and selecting Zoom out. You see a toolbar under your current desktop. Click on Add Activity to create a new desktop view.

Removing an activity: Zoom out from your current desktop view and select the red cross from the toolbar that will appear to remove the activity.

Note: You must Unlock Widgets (Ctrl + L) before you can remove any activities.

KDE Forums user Fengshaun has made a screencast showing ZUI usage.

How can I quickly move between Activities?

The ZUI method is rather slow, so a better way is to use an Activity Bar. A short how-to here explains exactly what you need to do.

Are there any keyboard shortcuts for Plasma?

In addition to the mouse, there is a number of shortcuts available:

  • Lock widgets: Ctrl + L
  • Zoom out: Ctrl + -
  • Zoom in: Ctrl + = or Ctrl + +
  • Next applet: Ctrl + N
  • Previous applet: Ctrl + P
  • Add activity: Shift-Ctrl + A
  • Next activity: Shift-Ctrl + N
  • Previous activity: Shift-Ctrl + P
  • Applet settings: Ctrl + S
  • Remove applet: Ctrl + R

To change shortcuts, click on the desktop cashew and select "Shortcut settings".

How can I associate a keyboard shortcut with an applet?

Simply select an applet's settings (the wrench icon on the applet handle) and then click on Keyboard Shortcut. You will then be able to define a keyboard shortcut for your applet. Notice that some applets do not offer this feature (generally the ones that have no configuration).

Can the Dashboard show widgets other than those on my desktop?

Yes, it can. To configure it, click on the desktop cashew and zoom out. Choose Configure Plasma from the toolbox that it appears, and check the Use a separate dashboard option. Click on OK and you will have a different dashboard than your desktop when you access it.

How can I use virtual desktops as activities ?

Zoom out by clicking on the desktop cashew and a new toolbox will open. Click on Configure Plasma then check the box Different activity for each virtual desktop. Click on OK and you are done.

Notifications take up too much screen - can I get rid of them?

For those who do not like it, there is a simple way to disable them. Right click on the system tray notification area (the i icon) and select System Tray Settings.

There you will have the options of disabling notifications for applications or for jobs (such as file transfers) by unchecking the relevant check boxes.

Theming

I don't like the default look of the panel and other Plasma components. Can I change that?

Yes, the ability to change the look of Plasma was planned since the beginning. Plasma can use "themes", which are essentially a number of SVG images and files specifying the colors, to change its appearance. A number of themes are already available on kde-look.org.

How can I change my Plasma theme?

Right click on your current desktop, select Desktop Settings (alternatively, you can select the same option from the desktop cashew) and you will find the option under Desktop Theme. You can also download new themes directly from there by clicking the New Theme button, using Get Hot New Stuff (GHNS).

Step by step instructions, although made for KDE 4.1, (including screenshots) are available on Aikurn's blog.

Is there support for advanced visual effects (transparency, etc.) without using compositing?

In an effort to keep the codebase clean of workarounds (if not even hacks), the Plasma developers have decided that features that require compositing to work will not have a composite-less version. The main reasoning is that in the past (KDE 3.5.x), such approaches were one of the causes of the unmaintainability of the code, and also because supporting those features is actually pushing graphics card developers to write better graphics drivers.

Troubleshooting

Plasma crashed, how can I bring my desktop back?

Normally Plasma automatically restarts in the event of a crash. If this doesn't happen, open KRunner by pushing Alt + F2 (it should be still running) and type "plasma-desktop". Plasma will be restarted.

My panel is gone, how do I get it back?

kquitapp plasma-desktop; rm $KDEHOME/share/config/plasma-desktop-appletsrc; plasma-desktop

This deletes your plasma settings, so you'll get the default configuration back. If running the 3 commands at once doesn't work, try typing them in manually and wait a few seconds before running the next command.

(Note that the $KDEHOME environment variable may not be set. Try ~/.kde (Fedora, Kubuntu Intrepid, Debian, upstream default) or ~/.kde4 (OpenSUSE, Kubuntu Hardy and several others).)

Some GTK+ applications show wrong system tray icon sizes.

That is unfortunately a problem in the Freedesktop.org system tray specification, which does not define the sizes for system tray icons properly.

I experience extreme slowness when using Plasma with the NVIDIA binary driver.

This is NVIDIA's fault entirely, due to their driver not supporting correctly the XRender X11 extension, and it also affects other parts of KDE SC such as Konsole. See this blog entry on how to report issues upstream to NVIDIA. This page contains a few suggestions on how to improve performance.

NVIDIA has released the 18x.xx series driver that can improve performance dramatically with the Plasma Desktop and KDE SC 4.x in general.

Users who have a NVIDIA 6 or 7 series card should add the following lines to their xorg.conf in the "Screen" section, which may improve performance. You don't need to add these lines if you have a 8/9 or above series NVIDIA card, since they're enabled by default.

Option "PixmapCacheSize" "5000000"
Option "AllowSHMPixmaps" "0"

There are some other options you can try, which may improve things if you get poor Desktop Effects performance.

Go to SystemSettings -> Desktop -> Desktop Effects -> Advanced, you will see OpenGL Options, make sure Bilinear or Nearest (fastest) is set as the Texture Filter option. You can also try turning off Use VSync there as well.

Folder View and other plasmoids look badly rendered with an ATI video card and the open source radeon driver.

To work around this issue, you have to change the 2D acceleration method from XAA (X Acceleration Architecture) to the newer EXA. As this involves editing your xorg.conf file, bear in mind that such a modification may damage your system. Do it at your own risk.

To make the switch, edit your xorg.conf file (make a backup just in case) and locate the Device section for your graphics card. Add the line

Option "AccelMethod" "EXA"

before the "EndSection" line. If there is already a line with AccelMethod, change it from XAA to EXA. Save the file and restart the X server.

Notice that EXA is still marked as unstable, and that some other applications such as some KDE3 programs may render incorrectly.

Hints & Tips

Add an application launcher to the panel

If you use Kickoff as your menu, right-click on the application icon, and select Add to Panel. If you use Lancelot simply drag the application onto the panel - you may need to hold it there for a second or so before letting go.

Add a launch menu to the panel

Lancelot makes this possible. Click on the menu launcher, then drag Applications as described above. When the popup menu appears, select Lancelot part.

Various parts of the Lancelot menu can be dragged to the panel in this way. Read this description of how to use it.

'Favorites' may be a good choice for adding to the panel

Disabling ARGB visuals

For many of its effects, Plasma makes use of the so-called "ARGB visuals". For older video cards, this can mean a severe performance hit. To disable ARGB visuals and increase performance, you need to set the KDE_SKIP_ARGB_VISUALS environment variable to 1 (KDE_SKIP_ARGB_VISUALS=1) before Plasma starts. You can do so by putting a line setting this variable in /etc/profile or in ~/.profile.

Right-click the panel when your task bar is full

To make some changes to the panel you need to right-click on it - and if you have open applications that may not be easy, The workaround for this problem is to use the panel cashew to bring up the panel settings, then you can right-click anywhere on the panel, including on application tabs, and the command will go to the panel, not the application.

Re-arrange the application tabs on your task bar

Right-click on an empty part of the task bar (or use the method described above) and select Task Manager Settings. In the Sorting combo-box, select Manual. OK to close it. Now you can re-arrange your task icons by holding down Alt and dragging the tabs to their new order. (If you use this alt-drag while the panel config panel is open the whole group of application tabs will move as one.)

Watch some Screencasts

This forum page has links to screencasts that will help you understand Desktop Settings, Panel Settings and the Zooming User Interface (a.k.a. the Cashew).

Miscellaneous tips

Some alternatives for those who like a sparse desktop:

1 - you can remove the panel entirely. Open applications would be available using the Alt + Tab cycling.

2 - Remove the panel and add a short one at the top of the screen, to hold only the task manager

3 - Create a panel containing the task manager and use autohide.

Glossary

See the Glossary page.

HowTo

A page of Screencasts to help understand Plasma

Thanks

  • Daniel Laidig & Simon St.James - thanks for the umeet IRC logs!
  • Marco Martin - thanks for the information on panels!
  • Sebas - thanks for letting me use information from your blog entries!
  • Half-Left - great example of ZUI usage!
  • Aikurn - Excellent videos!
  • Marcelo Magno T. Sales - for giving panel Tips on a mailing list

Contributors

  • Luca Beltrame - current maintainer
  • Joseph M. Gaffney
  • Chani
  • Dipesh
  • Maninalift
  • All the anonymous contributors