Dolphin/Administración de arquivos

    From KDE UserBase Wiki
    Revision as of 17:00, 16 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

    Descubrir Dolphin

    A primeira sección dá unha volta guiada por Dolphin. A segunda sección explica os conceptos dos distintos tipos de marcadores. A terceira sección fala sobre a xestión de arquivos. E finalmente, botámoslle unha ollada a «Outras cousas interesantes». Pode premer as imaxes para amplialas.

    Information

    Nas partes onde se mencionan rutas, teña en conta se segundo a distribución de software que estea a usar, poderían referirse a «~/.kde» ou «~/.kde4».


    Información xeral

    Dolphin ou Konqueror?

    This tutorial describes Dolphin for KDE 5. Konqueror was the standard file manager in KDE 2 and 3. You can also use Konqueror as the default file manager in KDE 5. To do this, open System Settings and go to the Applications -> Default Applications module. You can select Konqueror or a range of other applications to use as the default file manager.

    Introdución a Dolphin

    Dolphin é o xestor de ficheiros da colección de software de KDE.

    A continuación explicarase como empregar Dolphin para tarefas habituais de xestión de ficheiros, e como personalizalo.

    Ao abrir Dolphin desde o menú Kickoff, o xestor de ficheiros mostra o cartafol de inicio. O cartafol de inicio predeterminado é o cartafol persoal.

    To open a file, or go to a folder just click on it. (This can be changed to double-click in System Settings -> Input Devices -> Mouse section

    Para seleccionar un ficheiro e cartafole, sitúa o cursor sobre el, e preme a cruz verde que aparecerá. Para deseleccionalo, repite os mesmos pasos; desta vez, a icona a premer será un guión vermello. Así:

    Ao premer a icona de cruz, o ficheiro ou cartafol engadirase á selección. Para seleccionar varios ficheiros, só ten que repetir os pasos. Para seleccionar varios ficheiros, tamén pode premer o botón principal co cursor en calquera punto do panel central de Dolphin, e arrastrar o cursor formando un rectángulo.

    Tamén pode usar atallos de teclado para seleccioan e deseleccionar ficheiros ou cartafoles:

    • Ao premer un ficheiro ou cartafol coa tecla Ctrl premida, o ficheiro ou cartafol selecciónase se non estaba seleccionado, e deselecciónase se estaba seleccionado.
    • Ao premer un ficheiro ou cartafol coa tecla Maiús premida, selecciónanse todos os ficheiros e cartafoles desde o último seleccionado ata o que acaba de premer.

    Así é como se ve cando se seleccionan varios ficheiros:

    Crear un cartafol novo. Para crear un cartafol novo dentro do cartafol actual, prema en calquera lugar do panel central para mostrar o menú contextual, e seleccione Crear novo -> Cartafol. Tamén pode usar o atallo F10.

    Lapelas. Dolphin permite empregar lapelas. Para abrir unha nova lapela, seleccione Ficheiro -> Nova lapela (se ten a barra do menú activada). tamén pode empregar o atallo Ctrl + T, ou premendo co botón central no cartafol de destino ou botón de navegación.

    Note

    A barra do menú de Dolphin está agochada, pero pode accederse a ela facilmente, así como facela visíbel de novo. Para activala, seleccione Control -> Mostrar a barra de menú ou prema Ctrl + M.


    Dolphin ábrese de maneira predeterminada ao premer un cartafol. Tamén pode abrilo desde o menú Kickoff.

    Barra de lugar

    Dolphin introduce unha nova forma de usar a barra de lugar, máis rápida e precisa: unha barra de lugar en ronsel. En vez de mostrar a ruta completa, só se mostran os puntos de navegación, empezando desde un dos lugares do usuario, e cada punto de navegación é un botón. Ao premer un dos botóns, ábrese o cartafol ao que ese botón corresponde. Así pode acceder directamente a un cartafol desde calquera dos cartafoles e subcartafoles que hai dentro del.

    Entre os botóns que representan cartafoles hai frechas pequenas, que son á súa vez botón tamén. Ao premelas, pode ver unha lista dos cartafoles que están no mesmo nivel que o que está á dereita da frecha no ronsel, permitindo cambiar facilmente de cartafol.

    Change directories quickly


    Tamén pode empregar unha barra de lugar clásica que mostra a ruta completa. Para iso, prema a barra de lugar co botón secundario e seleccione Mostrar a ruta completa. Se quere poder editar o lugar da barra, prema Ctrl + L ou seleccione Control -> Barra de lugar -> Lugar editábel. Se preme sobre o espazo baleiro que hai a continuación do último cartafol do ronsel da barra de lugar, tamén poderá editar a ruta da barra de lugar. Cando a barra de lugar está no modo de edición, móstrase unha marca no extremo dereito da barra. A marca é un botón que pode premer para devolver a barra de lugar ao modo de ronsel. Por suposto, tamén pode facer o mesmo mediante atallos de teclado ou mediante os menús.

    Vista partida

    Dolphin offers the possibility to split the current folder view so that two folder views are displayed next to each other as known from Midnight Commander. This is a very comfortable view to copy or move files from one folder to another.

    Para dividir a vista, prema o botón Dividir da barra de ferramentas ou, se activou a barra do menú, seleccione Vista -> Dividir (o atallo de teclado é F3). Para volver á vista única, prema o botón Pechar ou prema F3 de novo. A icona do botón indicará a xanela que se vai pechar. Segundo que vista estea activa, o guión (signo de restar) aparecerá á dereita ou á esquerda da icona. Pecharase a vista activa; é importante que non o esqueza se pensa empregar o atallo de teclado. Na barra de ferramentas hai tamén un botón para dividir e pechar a vista que mostra o guión tamén, polo que resulta doado identificar que vista se pechará.

    Por suposto, cada vista ten unha barra de lugar de seu, e pode usar un modo de vista diferente.

    Modo de vista

    Dolphin supports three different view modes: "Icons", "Details" and "Compact". These can be changed from Control -> View Mode , via the menu View -> View Mode (if menu bar is enabled) or via the keyboard shortcuts Ctrl+1 (Icons), Ctrl+2 (Compact) and Ctrl+3 (Details). There is also a button for each view mode in the toolbar and the context menu of the folder view offers a submenu View mode to change the view mode.

    Icons

    Each file and each folder is represented by an icon in the view mode "Icons". Instead of displaying an icon a preview of the file can be shown. This behaviour can be turned on/off via the menu View -> Preview (if menu bar is enabled) or via the main toolbar button Preview. There is a size limit for the file previews. This size limitation can be configured via Settings -> Configure Dolphin -> View Modes -> General option File Previews -> Maximum file size. There is also an option to use thumbnails embedded in files. In KDE 4.5 Previews are enabled (and maximum size defined) by Settings -> Configure Dolphin -> General page -> Preview tab. Starting from KDE 4.8, the aforementioned settings can be configured via Control -> Configure Dolphin -> View Modes.

    The files in the currently selected folder are sorted in alphabetical order by default. The way of sorting can be changed via menu Control -> Sort by. The following sort criteria are available:

    • Name
    • Size
    • Date
    • Permissions
    • Owner
    • Group
    • Type
    • Link Destination
    • Path

    Additionally the sorting sequence can be defined by Control -> Sort by -> Descending or Control -> Sort by -> Folders First.

    There is the possibility to display additional information below the icons. These can be turned on/off via Control -> Additional Information or View -> Additional Information (if menu bar is enabled). In principal the same criteria which are available as search criteria can be selected.

    You can group the icons to achieve a better overview. This is turned on via Control -> Show in Groups or View -> Show in Groups (if menu bar is enabled). Now the icons are grouped and the groups are divided by a horizontal line containing the name of the group as caption. The grouping is related to the selected search criteria.

    Details

    In view mode "Details" additional information is displayed by default in contrast to view mode "Icons". All files are listed in a tabular. The context menu of the table header offers the possibility to add additional columns. The following columns are available:

    • Size
    • Date
    • Permissions
    • Owner
    • Group
    • Type
    • Link Destination
    • Path

    Column "Name" is always displayed. By clicking on the header of one of the columns the table will be sorted by this column. By clicking on the same column header the sorting sequence is reversed.

    Since KDE 4.1 it is possible to display the folders as a tree. In this mode a plus sign is shown next to the folder. Plus sign has been replaced by > symbol in newer KDE versions. By clicking on this sign the folder is expanded and all containing sub folders and files are also shown in the table but they are attenuated. By clicking the sign, which displays a minus now (or an arrow pointing downwards in latest versions), again the expansion is closed again. Of course the tree structure can be used for as many folders as wished. In latest KDE releases, the tree view is enabled by default, but can be deactivated via Control -> Configure Dolphin -> View Modes -> Details with option Expandable Folders.

    Columns

    View mode "Columns" was inspired by the file manager Finder of Mac OS X. Entering a sub folder did not replace the current folder view but the content of the sub folder was listed in an additional column next to the column of the parent folder. This could be used for several hierarchies, so that you could navigate in an easy and fast way in the file system. Since KDE 4.8, view mode "Columns" has been dropped and will not be available in future Dolphin releases.

    Setting defaults for all folders

    Under Control -> Adjust View Properties (or under the menu item View -> Adjust View Properties if you have enabled menu bar) you can set any of these attributes to be the default for all folder views.

    Panels

    Dolphin contains several panels, which can be activated via menu Control -> Panels. Each panel can be placed in the left or right docking area. To move a panel you have to unlock panels (right clik on a panel and select Unlock Panels), click on the header and Drag&Drop the panel. The area where the panel will be placed on mouse released is highlighted. It is possible to stack panels on top of each other. In this case the panels are placed into tabs.

    In the header of each panel there are two buttons. The button near to the caption undocks the panel. This makes the panel an independent window which "floats" above Dolphin. The window is still combined with Dolphin and cannot be displayed without Dolphin and cannot for example be minimized like normal windows. By clicking the button again the panel is docked again. The second button will close the panel.

    Non Modal Dialogs

    When Moving, Copying or Deleting files/directories the dialog disappears even when the operation has not yet completed. A progress bar then appears in the bottom right of the screen, this then disappears also, if you want see the progress you need to click a small (i) information icon in the system tray.

    Warning

    New users who are not used to this way of working (and even experienced users) can get caught out by this, if you are Moving, Copying or Deleting large directories then you need to use the icon to monitor the progress of your operation. If you don't then any subsequent actions you do, may well use an incomplete file structure resulting in corrupted files. You have been warned!


    Places

    Dolphin contains a new kind of bookmarks Places. These are displayed in a panel which can be activated via Control -> Panels -> Places (keyboard shortcut F9). The default Places are identical to the ones shown in the category Computer of the K-Menu Kickoff.

    By clicking one of these places it will be opened in the current folder view. The context menu offers the possibility to edit the places or to remove them again. It is also possible to hide entries temporarily.

    The context menu of a folder can be used to add this folder an another entry to the Places panel. Therefore there is a menu item Add to Places. You can also Drag&Drop a folder to the Places panel.

    The places panel also contains entries to connected removable devices like USB-keys or CDs. A small plug icon indicates if the device is mounted. The context menu offers the possibility to unmount the device.

    The places are used as the basis in the breadcrumb navigation bar. Each address is shown in relation to the nearest parent folder which is one of the places.

    Information

    The information panel can be activated via Control -> Panels -> Information (keyboard shortcut F11). This panel displays a preview or an icon of the currently selected file/folder or of the file/folder below the mouse cursor. Some additional information like change date or size to the file/folder is displayed as well.

    The information panel offers the possibility to rate files, add a comment or tag a file. This is one of the interfaces to the semantic Desktop Nepomuk which provides the advantages of the semantic web for the desktop. Starting from KDE 4.2 it is possible to search for the semantic links given by the tags.

    The Information Panel

    Tip

    If you are wondering about missing mp3 ID tags (title, time ...) with some files it is most likely that ID3 Version 2 tags are missing. You can add ID3 version 2 tags with KID3 for example.


    Folders

    A panel providing a tree structure for the file system can be displayed via Control -> Panels -> Folders (keyboard shortcut F7). The tree structure offers the possibility by clicking the > and ˇ signs to expand/collapse sub folders. By clicking on one of the folders the content will be displayed in the current view.

    Terminal

    The terminal emulator Konsole can be displayed directly in Dolphin via Control -> Panels -> Terminal (keyboard shortcut F4). This makes it possible to use shell commands directly in Dolphin. The terminal is opened in the folder which is displayed in the current view. Shift + F4 opens Konsole in new window.

    Dolphin with a Terminal

    File System Navigation

    Bookmarks and Places

    In KDE3 you could create bookmarks in Konqueror, but they were not available to any other application. KDE SC 4.x opens up a great deal more flexibility - but that inevitably means more complication. In fact KDE SC 4 has three classes of Bookmarks, which need to be differentiated. They reside in different files, and have different functions.

    KDE3 Konqueror didn't share bookmarks

    Three kinds of bookmark

    First, there is the set of bookmarks available only to Konqueror - web bookmarks. These are stored in ~/.kde/share/apps/konqueror/bookmarks.xml. Then there is a set which Dolphin calls Places. This set is available to all applications as well as the Dolphin file manager. Every time you use File -> Open you will see this set. The third set of bookmarks are Application Bookmarks. These share one file, regardless of the application that set them, and are available to all applications, unless you restrain them to a specific application. More of that later.

    Enable bookmarks

    In most distros Bookmarks are not enabled by default. In order to use bookmarks we first have to enable them. Open a File -> Open in most KDE applications and you will see, at the right-hand edge of the icon panel, a spanner or wrench. From the drop-down list, choose Show Bookmarks.


    Enabling Bookmarks


    "Places" for system-wide navigation

    There is a default set of Places -

    Home
    Network
    Root
    Trash

    but you can add other places. In Dolphin, right-click on a folder and select Add to Places, or just drag a folder onto Places.


    Adding a bookmark to Places


    By default this "Place" will be visible in all applications. If you want to keep it constrained to Dolphin, you need to right-click on the new name in the Places list, where you will find the option to Edit it. There is a check-box for Only show when using this application (Dolphin).


    This Place will only be visible in Dolphin


    You can see the result of that command if you read ~/.kde4/share/apps/kfileplaces/bookmarks.xml.

    In some applications too there is an option in the File menu to add a folder to Places. At this stage, however, applications vary in which features are available. The important thing to remember is that the default is for Places items to be available to all applications in the File -> Open dialogue.

    Bookmarks in applications

    This is the second class of bookmarks. Remember opening File -> Open and using the spanner/wrench? Next to it is a yellow star. This is the bookmark management menu.


    Manage Application bookmarks here


    Here you can define bookmarks that will be visible in the same menu on any application. They are stored in one file, ~/.kde4/share/apps/kfile/bookmarks.xml, which is used by all applications having that menu.

    Constraining to one application

    Some applications allow you to edit items in the Places menu. For instance, if in Gwenview you right click on a folder in Places you can set an option to Only show when using this application (Gwenview).


    Constraining a bookmark to an application


    If you need to constrain to an application that does not yet allow you to do that, the only way left is to edit the file ~/.kde/share/apps/kfile/bookmarks.xml. Immediately before the </metadata> tag you will need to add the line

    <OnlyInApp>appname</OnlyInApp>

    Archive Management in Dolphin

    Managing archives now becomes simple. In any directory in Dolphin, highlight the files that you want to compress, and right-click. Here, using the Compress option, you can elect to create a RAR archive, a Gzipped tar archive, or define another compression mode that you have already set up.


    Create a new archive


    Similarly, if you right-click on an existing archived file you get a range of actions added to the right-click menu. You can extract the archive to the current folder, to an autodetected subfolder or to another place of your choosing.

    Should you wish to add files to an existing archive, you can choose Open with Ark.


    Manage existing archives


    More Cool Actions

    Change a File Association on-the-fly

    Have you ever wanted to open a file, only to find that it is associated with an application that is not of your choice?

    You can, for one, alter this in Kickoff -> Computer -> System Settings -> Common Appearance and Behavior -> File Associations . This is the same as running kcmshell5 filetypes in a Konsole.

    Alternatively, if you want to change multiple associations right quick, you would edit the *.desktop file directly, e.g. the file /usr/share/applications/org.gnome.Builder.desktop . For example, Gnome Builder associates with a great number of file-types which may not be desirable. So the line

       MimeType=application/javascript;   # we do not want all of these ....
    

    may be shortened or commented out with # . Maybe a line

       InitialPreference=2
       X-KDE-InitialPreference=3
    
    

    in the builder.desktop file helps to keep your previous default associated app, with builder being only secondary or tertiary option.

    Thirdly, Dolphin and Konqueror offer a quick method for changing a single association:

    Right-click on the file and select Properties. The first line there is descriptive, something like:

    Type: XML document

    At the same level, on the right, there is a spanner (wrench). Click on that and you can add or change an association.

    Similarly, by working on a folder, you can change the default file manager to/from Konqueror, if you choose, or add another image browser to the possible associations.

    The Actions sub-menu

    The Actions sub-menu opens up a whole lot more cool things to do from Dolphin. Some possibilities only appear when applicable to the file you have selected. An apps .desktop file below /usr/share/applications defines what actions are applicable for a particular type of file. Some of the options are

    • Convert an image file to a different format
    • Preview the file
    • Download a remote file with KGet
    • Sign and/or encrypt the file, according to the encryption software installed

    Encode and copy audio CD tracks

    • Insert an audio CD
    • Navigate to this CD in Dolphin: it must appear as "Volume" in your Dolphin 'Places' or you can reach it by typing audiocd:/ in the address bar.


    Dolphin presenting audio CD


    You now notice that Dolphin is proposing a WAV file for each track, plus:

    • a CDA folder containing indexing information in the usual CDA format.
    • a Whole CD folder, containing one file for each format (.cda, .flac, .mp3, .ogg, .wav) holding all the tracks
    • a FLAC folder, containing the tracks encoded into FLAC format (lossless information format)
    • an Information folder containing the CDDB informations
    • an MP3 folder, containing all the tracks in MP3 format
    • a Ogg Vorbis folder, containing the tracks encoded in OGG format

    You then just have to copy the folder of your choice, in your preferred format to obtain the relative encoded version of your CD!


    timeline:/ and have your recent files as startup folder

    Have your recent files always in Dolphin

    In a current (2017, Version 16.08.3 of) dolphin (with baloo up and running), you can start up dolphin with a view of recently modified files: Just navigate to the address/location of timeline:/today/ (copy paste it to the address bar) or use it as dolphin start-up-folder in dolphin-settings. With older versions of dolphin, this required the below manual steps:

    Dolphin has access to a large number of file transfer protocols (KIO Slaves). One of those is provided by the KDE semantic search system (Nepomuk). Nepomuk offers a transfer protocol named history. You can navigate to it by entering timeline:/ in the location bar.

    One particularly neat thing there is the ability to have the Today folder from the timeline:/ protocol in the Places sidebar (you can just drag it there!). You can then change the name and icon (do a right click on the new Today entry and choose Edit entry Today...).

    It could be very useful to have this view of recently used files immediately when you start Dolphin. Unfortunately, as of Dolphin 2.1 (part of KDE SC 4.9) this is not possible without editing the Dolphin configuration file. See this blog for more details on that.

    To edit the configuration file, first close all Dolphin windows. Dolphin will save its configuration upon closing, overwriting any changes you might make!

    Then use KRunner (Alt + F2) to edit ~/.kde4/share/config/dolphinrc (or ~/.kde/share/config/dolphinrc, depending on your distribution) with KWrite as follows: kwrite ~/.kde4/share/config/dolphinrc. You can of course use any other editor as well, like Kate. In the configuration file, locate the [General] section to edit the HomeUrl into: HomeUrl=timeline:/today and save the file. You should now have the today view as default and have the files you're most often looking for at your fingertips!

    External links