Kdenlive/Manual/Installation/ru: Difference between revisions

From KDE UserBase Wiki
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 77: Line 77:
Olivier Banus (AKA Sunab) provides a personal package archive (PPA) of the latest '''development''' trees of Frei0r-plugins, MLT and '''Kdenlive'''. For details on how to install Kdenlive using this bleeding edge source see [https://launchpad.net/~sunab/+archive/kdenlive-svn launchpad.net - kdenlive-git (unstable).Testing only! ]
Olivier Banus (AKA Sunab) provides a personal package archive (PPA) of the latest '''development''' trees of Frei0r-plugins, MLT and '''Kdenlive'''. For details on how to install Kdenlive using this bleeding edge source see [https://launchpad.net/~sunab/+archive/kdenlive-svn launchpad.net - kdenlive-git (unstable).Testing only! ]


Note:  Sunab  also maintains a [https://launchpad.net/~sunab/+archive/kdenlive-release PPA] of the offical current release of Kdenlive  (as noted above) as well as the current release minus one at [https://launchpad.net/~sunab/+archive/ubuntu/kdenlive-release-old  ppa:sunab/kdenlive-release-old].
Note:  Sunab  also maintains a [https://launchpad.net/~sunab/+archive/kdenlive-release PPA] of the offical current release of '''Kdenlive''' (as noted above) as well as the current release minus one at [https://launchpad.net/~sunab/+archive/ubuntu/kdenlive-release-old  ppa:sunab/kdenlive-release-old].


If you need to back out a release to the previous release then:
If you need to back out a release to the previous release then:
Line 87: Line 87:
===Installing from daily builds  ===
===Installing from daily builds  ===


Dan Dennedy provides automatic daily builds that contain the latest git versions of Kdenlive, MLT, Frei0r, FFmpeg and some other important libraries.
Dan Dennedy provides automatic daily builds that contain the latest git versions of '''Kdenlive''', MLT, Frei0r, FFmpeg and some other important libraries.
You can test this packages without changing your system. Just download the package and extract it to a folder of your choice.
You can test this packages without changing your system. Just download the package and extract it to a folder of your choice.
Inside that folder is a "start-kdenlive" executable that will start for you the latest Kdenlive.  
Inside that folder is a "start-kdenlive" executable that will start for you the latest '''Kdenlive'''.  


Execute this by typing ./start-kdenlive in a terminal.
Execute this by typing <code>./start-kdenlive</code> in a terminal.


Daily builds are currently provided for Ubuntu (should be compatible with OpenSuse 12 and Debian 7) and Fedora.
Daily builds are currently provided for Ubuntu (should be compatible with OpenSuse 12 and Debian 7) and Fedora.
Line 99: Line 99:
Be sure to choose the correct download for your system.   
Be sure to choose the correct download for your system.   


kdenlive-fedora17-x86_64-YYYYMMDD.tar.bz2  is for 64bit fedora<br>
kdenlive-fedora17-x86_64-YYYYMMDD.tar.bz2  is for 64bit Fedora<br />
kdenlive-ubuntu12.04-x86_'''64'''-YYYYMMDD.tar.bz2  is for 64bit ubuntu - (release 12.04 or higher) or other debian based distros<br>
kdenlive-ubuntu12.04-x86_'''64'''-YYYYMMDD.tar.bz2  is for 64bit Ubuntu - (release 12.04 or higher) or other Debian based distros<br />
kdenlive-ubuntu14.04-x86-YYYYMMDD.tar.bz2  (no 64 in the name ) is for 32bit ubuntu - (release 14.04 or higher) or other debian based distros<br>
kdenlive-ubuntu14.04-x86-YYYYMMDD.tar.bz2  (no 64 in the name ) is for 32bit Ubuntu - (release 14.04 or higher) or other Debian based distros<br />





Revision as of 15:52, 8 March 2015

Установка

Установка готовых пакетов

Мультимедийные пакеты доступны во многих альтернативных хранилищах , в основном из-за определенных ограничений на доступные кодеки, в связи с патентами в ряде стран (в основном США на данный момент).

Всё в мире было бы прекрасно, если бы пакеты были от производителей официальных дистрибутивов, и мультимедийные редакторы выбирали только бесплатные кодеки для содействия их использованию во всём мире ... Итак попробуем придерживаться тех пакетов, которые распространяются дистрибутивами.?

Most linux distributions provide recent binary packages of Kdenlive that can be installed from your Package Manager. However, in some cases you can find more recent versions in private repositories.

This page at the Kdenlive home has instructions on how to source these more recent versions depending on what flavour of Linux you run. Instructions for Debian, Fedora Gentoo, OpenSUSE, Slackware and Ubuntu are available.

The current stable release is version 0.9.10 released 25th September 2014.
You need to have recent versions of frei0r, kdenlive , mlt and libvidstab e.g.
frei0r = 1.4.0+git20140826.72e51041
kdenlive = 0.9.10
mlt = 0.9.3+git20141005.22abed67
libvidstab=2:0.98b

Debian, Ubuntu и производные дистрибутивы

Debian проект содержит Kdenlive пакеты "squeeze" (6.0) релиза, однако чтобы воспользоваться преимуществами обновлений и исправлений, вы можете рассмотреть переход на "testing" релиз или даже "sid".

Once your package managment tool is pointed an appropriate release a simple apt-get install kdenlive should then work.

Sunab's PPA (see below) is not recommended for Debian because Debian uses a different lib layout for multiarch (reference: this post from vpinion)

Ubuntu так же предлагает Kdenlive с релиза "gutsy" (7.10), но по тем же причинам может быть предпочтительнее обновление до последней версии.

Sunab offers a stable release of Kdenlive from this PPA.

Once your package managment tool is pointed an appropriate release a simple apt-get install kdenlive should then work.

Note that Sunab's PPA is built against the avconv multimedia libraries that ubuntu/lubuntu/kbuntu etc ship with. It is not built against the "alternative" ffmpeg multimedia libraries that other distros might have. So using this PPA for non-avconv-utilizing distributions might be problematic. (Thanks avconv/ffmpeg schism !!!!).

Fedora, RedHat и производные дистрибутивы

RPM еще не является частью основного хранилища, поэтому вам придется воспользоваться неофициальным хранилищем RPM Fusion или packman. Следуйте инструкциям сайта относительно настройки хранилища и отдайте команду yum install kdenlive

Gentoo, Arch, порты BSD

Скриптами сборки можно пользоваться в современных системах, итак достаточно отдать команду emerge kdenliveили pacman-S kdenliveили pkg_add kdenlive и т.д.

Windows

Версии Kdenlive для Windows ещё не существует. Тем не менее, вы можете использовать некоторые "живые" (Live)Linux дистрибутивы для запуска Kdenlive в Windows. Некоторые советы можно найти на этой странице.

Существует также kdenlive on win Проект на Source Forge, который "состоит из Ubuntu VirtualBox образ, который предварительно настроен для работы Kdenlive". Проект была обновлен ​​2012-08-09.

MacOS

'Kdenlive и 'MLT можно скомпилировать и запустить под Mac OS X. Пакеты доступны из проекта MacPorts .

MacPorts - система, основана на исходных кодах: бинарного пакета Kdenlive нет. Через это "'Kdenlive"' и все зависимые программы, в том числе мультимедийные библиотеки, KDE и Qt следует собрать отдельно. Сборка может продолжаться достаточно долго, то может собраться неправильно. Сборка - процесс не для неопытных, нетерпеливых и слабонервных.

Для получения дополнительной информации см. здесь

You may have some success getting support for the MacPort of Kdenlive on the Mac Ports forum on MacOS Forge.

Установка из исходных кодов

Если вам хочется попробовать свежий код или собственные патчи к нему, вам следует собрать "'Kdenlive"' (а также "'MLT"') собственноручно.

You can use your distribution's package building procedure to use its software management system to install/upgrade/remove the binaries and data, and eventually share your builds (and even contribute to package maintenance - refer to the respective distribution manual).

If you prefer you can build & install Kdenlive to a local area (preferably not /usr, but rather /usr/local or $HOME/my_local_builds/kdenlive-last-release or similar). It is then recommended to use the build script [1] (Follow the instructions under "show kdenlive". These instructions will build Kdenlive and its dependancies [e.g. melt, ffmpeg] in a "sandbox").

Installing from Sunab's PPA

Olivier Banus (AKA Sunab) provides a personal package archive (PPA) of the latest development trees of Frei0r-plugins, MLT and Kdenlive. For details on how to install Kdenlive using this bleeding edge source see launchpad.net - kdenlive-git (unstable).Testing only!

Note: Sunab also maintains a PPA of the offical current release of Kdenlive (as noted above) as well as the current release minus one at ppa:sunab/kdenlive-release-old.

If you need to back out a release to the previous release then:

  • delete all packages (kdenlive, mlt, ...) from the kdenlive-release ppa (manually or with ppa-purge)
  • disable ppa:sunab/kdenlive-release in the package manager/software sources
  • enable the ppa:sunab/kdenlive-release-old in the package manager/software sources
  • install Kdenlive from ppa:sunab/kdenlive-release-old

Installing from daily builds

Dan Dennedy provides automatic daily builds that contain the latest git versions of Kdenlive, MLT, Frei0r, FFmpeg and some other important libraries. You can test this packages without changing your system. Just download the package and extract it to a folder of your choice. Inside that folder is a "start-kdenlive" executable that will start for you the latest Kdenlive.

Execute this by typing ./start-kdenlive in a terminal.

Daily builds are currently provided for Ubuntu (should be compatible with OpenSuse 12 and Debian 7) and Fedora.

See the daily builds rss feed which provides links to the builds for the above mentioned distributions.

Be sure to choose the correct download for your system.

kdenlive-fedora17-x86_64-YYYYMMDD.tar.bz2 is for 64bit Fedora
kdenlive-ubuntu12.04-x86_64-YYYYMMDD.tar.bz2 is for 64bit Ubuntu - (release 12.04 or higher) or other Debian based distros
kdenlive-ubuntu14.04-x86-YYYYMMDD.tar.bz2 (no 64 in the name ) is for 32bit Ubuntu - (release 14.04 or higher) or other Debian based distros


Daily builds are often an easy solution if you are having troubles with your instal and can be preferable to builing your own because you don't need to install a build environment (which can be problematic on old distro).

Daily builds are likely to work even if your distro doesn't match the reference ones, as these references are older (with ascendant compatibility libs) and the important libs are embedded - it normally works without problem.

The potential downside is that the daily builds are built from the unstable development stream and may contain bugs. On the plus side your daily build version and your main version of Kdenlive can live simultaneously on your machine.

См. так же Kdenlive homepage

  1. on distributions older than Debian 6 or Ubuntu 10.04 and derivatives, you need to set ENABLE_SWFDEC=0 in the config variables of the script. Modify the INSTALL_DIR in the script to something like INSTALL_DIR="$HOME/my_local_builds/kdenlive-last-release" to make it match where you want this local build to install.