Kdenlive/Manual/Installation/zh-tw: Difference between revisions

From KDE UserBase Wiki
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 13: Line 13:
[http://www.kdenlive.org/downloading-and-installing-kdenlive This] 在 '''Kdenlive''' 官網裏有指示如何依據你所偏好的Linux來使用一些最新的源碼或二進位包. 這些教學包含  Debian, Fedora Gentoo, OpenSUSE, Slackware 及 Ubuntu 這些主要的發行版.
[http://www.kdenlive.org/downloading-and-installing-kdenlive This] 在 '''Kdenlive''' 官網裏有指示如何依據你所偏好的Linux來使用一些最新的源碼或二進位包. 這些教學包含  Debian, Fedora Gentoo, OpenSUSE, Slackware 及 Ubuntu 這些主要的發行版.


As May 2015 obtaining and installing the latest version of Kdenlive has got a little complicated.   
As of May 2015, obtaining and installing the latest version of Kdenlive has gotten a little complicated.   
Development of Kdenlive up to this point has used a technology known as KDE Frameworks 4. And the last stable release using this technology is version  [http://kdenlive.org/discover/0.9.10 0.9.10] released 25th September 2014.<br />
Development of Kdenlive up to this point has used a technology known as KDE Frameworks 4. And the last stable release using this technology is version  [http://kdenlive.org/discover/0.9.10 0.9.10], released 25th September 2014.<br />
To use this you need to have recent versions of frei0r, kdenlive , mlt and  libvidstab
To use this you need to have recent versions of frei0r, kdenlive , mlt and  libvidstab
e.g. <br />
e.g.: <br />
frei0r = 1.4.0+git20140826.72e51041  <br />
* frei0r = 1.4.0+git20140826.72e51041  <br />
kdenlive = 0.9.10  <br />
* kdenlive = 0.9.10  <br />
mlt = 0.9.3+git20141005.22abed67 <br />
* mlt = 0.9.3+git20141005.22abed67 <br />
libvidstab=2:0.98b   <br />
* libvidstab=2:0.98b
<br />


Development of Kdenlive has now switched to a new version of the KDE Frameworks - called KF5 (KDE Frameworks 5).  To install versions of Kdenlive using this underlying technology you need to be on a Linux distribution that supports KF5. Ubuntu and its derivatives versioned 15.04 and higher support KF5.  It is not possible to install KF5 on distributions earlier than 15.04 (except by chrooting your system).
Development of Kdenlive has now switched to a new version of the KDE Frameworks called KF5 (KDE Frameworks 5).  To install versions of Kdenlive using this underlying technology, you need to be on a Linux distribution which supports KF5. Ubuntu and its derivatives versioned 15.04 and higher support KF5.  It is not possible to install KF5 on distributions earlier than 15.04 (except by ''chroot''ing your system).
Versions using KF5 are distributed by the [https://launchpad.net/~kubuntu-ci Kubuntu-CI Team]. The sunab ppa (see below) does not distribute KF5 versions. <br>
Versions using KF5 are distributed by the [https://launchpad.net/~kubuntu-ci Kubuntu-CI Team]. The sunab ppa (see below) does not distribute KF5 versions. <br>
Version numbers of the KF5 flavour start at 15.04.0 <br>
Version numbers of the KF5 flavour start at 15.04.0 <br>
Line 32: Line 33:
''Debian'' 專案  從 "squeeze" (6.0) 版開始搭載 '''Kdenlive''' , 可是如果想要得到最新的更新和修正您還是要考慮一下升級到 "testing" 版或 "sid".
''Debian'' 專案  從 "squeeze" (6.0) 版開始搭載 '''Kdenlive''' , 可是如果想要得到最新的更新和修正您還是要考慮一下升級到 "testing" 版或 "sid".


Once your package managment tool is pointed an appropriate release a simple <code>apt-get install kdenlive</code> should then work.
Once your package managment tool is pointed at an appropriate release, a simple <code>apt-get install kdenlive</code> should then work.


Sunab's PPA (see below) is not recommended for Debian because ''Debian uses a different lib layout for multiarch'' (reference: this [https://forum.kde.org/viewtopic.php?f=269&t=123425#p322708 post] from vpinion)
Sunab's PPA (see below) is not recommended for Debian because ''Debian uses a different lib layout for multiarch'' (reference: this [https://forum.kde.org/viewtopic.php?f=269&t=123425#p322708 post] from vpinon).


<span class="mw-translate-fuzzy">
<span class="mw-translate-fuzzy">
Line 42: Line 43:
Sunab offers a stable release of Kdenlive (KDE Frameworks 4 version) from [https://launchpad.net/~sunab/+archive/kdenlive-release this] PPA.
Sunab offers a stable release of Kdenlive (KDE Frameworks 4 version) from [https://launchpad.net/~sunab/+archive/kdenlive-release this] PPA.


Once your package managment tool is pointed an appropriate release a simple <code>apt-get install kdenlive</code> should then work.
Once your package managment tool is pointed at an appropriate release, a simple <code>apt-get install kdenlive</code> should then work.


Note that Sunab's PPA is built against the avconv multimedia libraries that ubuntu/lubuntu/kbuntu etc ship with. It is not built against the "alternative" ffmpeg multimedia libraries that other distros might have. So using this PPA for non-avconv-utilizing distributions might be problematic.  (Thanks  [http://blog.pkh.me/p/13-the-ffmpeg-libav-situation.html avconv/ffmpeg schism] !!!!).
Note that Sunab's PPA is built against the avconv multimedia libraries which Ubuntu/Lubuntu/Kubuntu et al. ship with. It is not built against the "alternative" ffmpeg multimedia libraries that other distros might have. So using this PPA for non-avconv-utilizing distributions might be problematic.  (Thanks  [http://blog.pkh.me/p/13-the-ffmpeg-libav-situation.html avconv/ffmpeg schism] !!!!).


==== Fedora, RedHat 和延伸的版本 ====
==== Fedora, RedHat 和延伸的版本 ====
Line 62: Line 63:
</span>
</span>


There is also the [http://sourceforge.net/projects/kdenlive-on-win/ kdenlive on win] project on source forge which "consists of an Ubuntu VirtualBox image that is preconfigured to run Kdenlive". The project was last updated 2012-08-09.
There is also the [http://sourceforge.net/projects/kdenlive-on-win/ kdenlive on win] project on SourceForge which "consists of an Ubuntu VirtualBox image that is preconfigured to run Kdenlive". The project was last updated 2012-08-09.


==== MacOS ====
==== MacOS ====

Revision as of 15:56, 4 June 2015

關於安裝

安裝二進位套件

多媒體套件常見於多個套件庫,因為某些國家專利的因素(主個是美國),有些解碼器在發布上會有限制。

在理想世界裏每件事都是美好的。假如套件包裝志工可貢獻於官方發布版,多媒體編輯軟體只選擇自由解碼器推廣到全世界 ...試著堅持發布到所有發行版本?

大多數的linux 流通版提供最近的Kdenlive 二進位軟件,可以透過您的套件管理者程式安裝,然後,在一些狀況,您能在私人的軟件倉庫找到比較新的版本。

ThisKdenlive 官網裏有指示如何依據你所偏好的Linux來使用一些最新的源碼或二進位包. 這些教學包含 Debian, Fedora Gentoo, OpenSUSE, Slackware 及 Ubuntu 這些主要的發行版.

As of May 2015, obtaining and installing the latest version of Kdenlive has gotten a little complicated. Development of Kdenlive up to this point has used a technology known as KDE Frameworks 4. And the last stable release using this technology is version 0.9.10, released 25th September 2014.
To use this you need to have recent versions of frei0r, kdenlive , mlt and libvidstab e.g.:

  • frei0r = 1.4.0+git20140826.72e51041
  • kdenlive = 0.9.10
  • mlt = 0.9.3+git20141005.22abed67
  • libvidstab=2:0.98b


Development of Kdenlive has now switched to a new version of the KDE Frameworks called KF5 (KDE Frameworks 5). To install versions of Kdenlive using this underlying technology, you need to be on a Linux distribution which supports KF5. Ubuntu and its derivatives versioned 15.04 and higher support KF5. It is not possible to install KF5 on distributions earlier than 15.04 (except by chrooting your system). Versions using KF5 are distributed by the Kubuntu-CI Team. The sunab ppa (see below) does not distribute KF5 versions.
Version numbers of the KF5 flavour start at 15.04.0

Debian, Ubuntu 和延伸的版本

Debian 專案 從 "squeeze" (6.0) 版開始搭載 Kdenlive , 可是如果想要得到最新的更新和修正您還是要考慮一下升級到 "testing" 版或 "sid".

Once your package managment tool is pointed at an appropriate release, a simple apt-get install kdenlive should then work.

Sunab's PPA (see below) is not recommended for Debian because Debian uses a different lib layout for multiarch (reference: this post from vpinon).

Ubuntu 也從 從"gutsy" (7.10)開始提供 Kdenlive, 基於相同的理由最好是升級到最新的 釋出版比較好.

Sunab offers a stable release of Kdenlive (KDE Frameworks 4 version) from this PPA.

Once your package managment tool is pointed at an appropriate release, a simple apt-get install kdenlive should then work.

Note that Sunab's PPA is built against the avconv multimedia libraries which Ubuntu/Lubuntu/Kubuntu et al. ship with. It is not built against the "alternative" ffmpeg multimedia libraries that other distros might have. So using this PPA for non-avconv-utilizing distributions might be problematic. (Thanks avconv/ffmpeg schism !!!!).

Fedora, RedHat 和延伸的版本

RPM 套件目前並不在正式的發行版維護, 所以你須到非正式的套件倉庫裏去找,如 RPM Fusion 或是 packman. 依照這些網站的建議去取得 然後輸入指令 yum install kdenlive

Gentoo, Arch, BSD ports

最新的( up-to-date )系統已經準備好建構的腳本, 所以分別執行emerge kdenlivepacman -S kdenlivepkg_add kdenlive, 等等.

Windows

目前沒有Kdenlive 的原生Windows 版本。然而你可使用一些虛擬化技術 Linux distribution 即可在 Windows執行 Kdenlive. 在 this page這裏可以找到一些忠告.

There is also the kdenlive on win project on SourceForge which "consists of an Ubuntu VirtualBox image that is preconfigured to run Kdenlive". The project was last updated 2012-08-09.

MacOS

KdenliveMLT 可在在 Mac OS X之上編譯及執行. 套件可以在 MacPorts 專案取得.

MacPorts 是源碼為主(source-based )的系統- 那裏沒有Kdenlive的二進位程式打包. 因此 Kdenlive 和它數量龐大的相依套件,如多媒體庫,KDE, 和 Qt 都必須編譯過. 這過程會發很長的時間及佔用很多磁碟空間! 更麻煩的是, 一些套件沒有正確的建構是蠻常見的; 對初學者來說不是簡單的任務,過程會令人不耐煩或灰心 "faint of heart."

更多細節可參閱 this

You may have some success getting support for the MacPort of Kdenlive on the Mac Ports forum on MacOS Forge.

從源碼安裝

假如你想測試最近被提交的源碼或是您個人的修正(patches), 你必須自己建構 Kdenlive (有時可能包含 MLT) .

您可以使用您發行版的套件建構程序來配合軟件管理系統處理安裝/升級/移除(install/upgrade/remove) 二進位檔和資料, 最後分享你的建構檔 (或貢獻給套件維護 - 請分別參考各發行版的使用手冊).

假如您偏愛自行建構和安裝 Kdenlive 到你的本機 (不喜歡在 /usr, 比較偏好在 /usr/local$HOME/my_local_builds/kdenlive-last-release 或其他位置). 特例推薦使用build script 腳本[1]

從Sunabs PPA安裝

Olivier Banus (AKA Sunab) 提供了個人的套件倉庫(PPA)給最新的開發樹使用如Frei0r-plugins, MLT and Kdenlive. 如何使用這個來源來安裝 Kdenlive 可參閱launchpad.net

Note: Sunab also maintains a PPA of the offical current release of Kdenlive (as noted above) as well as the current release minus one at ppa:sunab/kdenlive-release-old.

If you need to back out a release to the previous release then:

  • delete all packages (kdenlive, mlt, ...) from the kdenlive-release ppa (manually or with ppa-purge)
  • disable ppa:sunab/kdenlive-release in the package manager/software sources
  • enable the ppa:sunab/kdenlive-release-old in the package manager/software sources
  • install Kdenlive from ppa:sunab/kdenlive-release-old

Installing from daily builds

Dan Dennedy provides automatic daily builds that contain the latest git versions of Kdenlive, MLT, Frei0r, FFmpeg and some other important libraries. You can test this packages without changing your system. Just download the package and extract it to a folder of your choice. Inside that folder is a "start-kdenlive" executable that will start for you the latest Kdenlive.

Execute this by typing ./start-kdenlive in a terminal.

Daily builds are currently provided for Ubuntu (should be compatible with OpenSuse 12 and Debian 7) and Fedora.

See the daily builds rss feed which provides links to the builds for the above mentioned distributions.

Be sure to choose the correct download for your system.

kdenlive-fedora17-x86_64-YYYYMMDD.tar.bz2 is for 64bit Fedora
kdenlive-ubuntu12.04-x86_64-YYYYMMDD.tar.bz2 is for 64bit Ubuntu - (release 12.04 or higher) or other Debian based distros
kdenlive-ubuntu14.04-x86-YYYYMMDD.tar.bz2 (no 64 in the name ) is for 32bit Ubuntu - (release 14.04 or higher) or other Debian based distros


Daily builds are often an easy solution if you are having troubles with your instal and can be preferable to builing your own because you don't need to install a build environment (which can be problematic on old distro).

Daily builds are likely to work even if your distro doesn't match the reference ones, as these references are older (with ascendant compatibility libs) and the important libs are embedded - it normally works without problem.

The potential downside is that the daily builds are built from the unstable development stream and may contain bugs. On the plus side your daily build version and your main version of Kdenlive can live simultaneously on your machine.

或參閱 Kdenlive homepage

  1. 若是您的發行版比 Debian 6Ubuntu 10.04 及延伸版還舊, 你必須把腳本裏的設定變數設成 ENABLE_SWFDEC=0