Archive:Kdenlive/Manual/Project Menu/Render/uk: Difference between revisions

    From KDE UserBase Wiki
    (Created page with "У версії 0.9.6 для Linux вам слід двічі клацнути на області даних у полі метаданих, щоб ввести якісь н...")
    (Created page with "У випадках, коли є звукова доріжка... File:Kdenlive Video plus Audio in seperate tracks.png")
    Line 193: Line 193:
    }}
    }}


    In cases where there is an audio track ...
    У випадках, коли є звукова доріжка...
    [[File:Kdenlive Video plus Audio in seperate tracks.png]]
    [[File:Kdenlive Video plus Audio in seperate tracks.png]]



    Revision as of 17:16, 4 August 2019

    Other languages:

    Information

    • How to choose the correct output format and bit rate?
    • What to do for rendering lossless, for an iPhone, or whatever? (Dropdown containing targets like lossless/HQ/player)

    Обробка

    Обробка — це процес, коли редаговані кліпи зберігаються в одне повне відео. Під час процесу обробки відео може бути стиснуто та перетворено у одних з декількох форматів (тобто кодеків).

    Діалогове вікно обробки даних можна відкрити натисканням кнопки , за допомогою пункту Обробити у меню «Проєкт» або натисканням комбінації клавіш Ctrl + Enter.

    Діалогове вікно обробки у версії 19.08
    Діалогове вікно обробки — версія 19.08


    Категорії профілю обробки
    Категорії профілю обробки — версія 19.08


    У Kdenlive передбачено багато різних наборів налаштувань профілю обробки. Профілі обробки згруповано за категоріями. Див. наведений вище знімок.

    Обробка файлів — застарілі версії

    На наведених нижче знімках показано діалогове вікно обробки, якщо вибрано категорію Призначення Обробка до файла. На перших двох знімках показано компонування діалогового вікна у версії 0.9.10 of Kdenlive, а на третьому знімку показано, як виглядало діалогове вікно у версії 0.9.8 Kdenlive.

    У версії 0.9.10 Kdenlive діалогове вікно було значно змінено, оскільки у ньому було реалізовано вибір обробки проєкту зі змінною бітовою швидкістю (VBR) або сталою бітовою швидкістю (CBR)

    Змінна бітова швидкість — застарілі версії
    File rendering dialog Variable Bit Rate - ver 0.9.10


    When a variable bitrate profile is selected, the File Size section displays a drop down for choosing the Video quality you want. This quality figure is a codec-dependent number representing the quality of the video that will be rendered. Generally, lower numbers mean higher quality video and larger file sizes (e.g. x264, MPEG2, VPx), but some codecs use opposite order (e.g. Theora). Profiles provided with Kdenlive offer these numbers ordered from best quality (almost lossless) to lower quality (still not degrading too much). The exact file size that is produced can not be predicted when using the VBR method. The idea behind this is that you specify a certain quality of video that you want through the entire video and the encoding optimizes bitrate to give you that constant quality, lowering data size for low action scenes and using more bits for high action scenes.

    Приклад: обробка 1 хвилини 55 секунд матеріалу з розміром кадру 720 x 576, закодованого у H.264 і знятого на iPhone з якістю 15 і профілем H.264/AAC High Profile дає файл розміром у 186 МБ. Обробка того самого матеріалу з якістю 20 дає файл розміром у 83 МБ.

    Стала бітова швидкість — застарілі версії
    File rendering dialog Constant Bit Rate - ver 0.9.10


    When a constant bitrate (CBR) profile is selected, the File Size section displays a drop down for choosing the Video bitrate you want. This is similar to the ver <=0.9.8 behaviour of Kdenlive. You select the video bitrate you want and the video is encoded at that video bitrate across its entire length.

    File rendering dialog - ver 0.9.8


    Обробка для DVD — застарілі версії

    DVD Rendering produces files that are compatible with DVD authoring software. MPEG2 files created from file rendering profiles are less likely to be compatible with DVD software. For quality settings see Variable Bit Rate and Constant Bit Rate. For DVD VBR lower Video quality setting number means better quality.

    Note that this rendering does not create a DVD file system. It merely creates DVD-compatible MPEG2 files that can be used by DVD authoring software. If you check the Open DVD Wizard after Rendering check box, then the DVD Wizard will open and you can use it to create a DVD file system (in .ISO format). The DVD Wizard is also available from the File Menu.

    Create chapter file based on guides enables chapter markings on your DVD. Chapters work with the "next" and "previous" buttons on the DVD player and can populate scene selection menus. In order to create chapters this way you need to have marked chapters with guides on timeline. DVD wizard enables marking of chapters also during DVD creation step.

    Вебсайти — застарілі версії

    Мобільні пристрої — застарілі версії

    Створення нетипових профілів обробки

    Ви можете створити ваші власні профілі обробки, натиснувши кнопку, яку позначено на наведеному нижче знімку.

    This will open the Save Profile dialog (also shown in the above screenshot) and the Parameters section will be filled in with the render parameters of the profile that you had selected when you clicked the button. You can edit values in the parameters and save your own custom render profile.

    Параметри профілю обробки є параметрами melt. Пояснення щодо їхнього призначення можна знайти у документації з melt або у даних, які виводить команда melt -help у консолі.

    На наведеному вище знімку вікна зображено діалогове вікно Зберегти профіль у версіях Kdenlive до 0.9.4.

    In version >=0.9.5 there is an improved version of the Save Profile dialog (see below) which allows you to customize the bitrates that are offered in the render profile.

    Див. також Параметри профілів обробки — як їх читати

    Обробка у пакетному режимі

    If you have a lot of rendering jobs to do, you can use Kdenlive to create rendering scripts which you can accumulate and then execute in batch mode overnight. See Rendering Using Rendering Scripts.

    Alternatively, once you have submitted a rendering job on a project and it is up and running in the Job Queue, you can drag the render window out of the way and edit the project some more or load a new project and render that one too. The second render job submitted will go into the Job Queue. Editing the project after a render job is submitted will not change the settings on that job.

    Обробка з використанням параметра напрямної ділянки

    This makes use of Guides to define a region of the project that is to be rendered. See Rendering Using Rendering Scripts.

    Обробка з використанням параметра позначеної ділянки

    If you select the Selected Zone radio button from the bottom of the render dialog, Kdenlive will only render that portion of the project which has a selected zone created for it. See Creating Zones in Project Monitor

    Накладка обробки

    This option overlays a time code or frame count over the rendered video. This will put the overlay over the entire rendered project. Alternatively you can use the Dynamic Text effect to overlay selected regions of the video.

    render overlay result


    Експортувати метадані

    Позначте цей пункт, щоб метадані, які було введено за допомогою вкладки Параметри проєкту - > Метадані, було записано до метаданих обробленого файла.

    У версії 0.9.6 для Linux вам слід двічі клацнути на області даних у полі метаданих, щоб ввести якісь нові дані.

    На цьому зображенні показано метадані проєкту:

    А це метадані результату (оброблено із позначенням пункту Експортувати метадані).


    $ ffprobe dog_rotated_meta_data.mp4
    Metadata:
        major_brand     : isom
        minor_version   : 512
        compatible_brands: isomiso2avc1mp41
        title           : Bailey
        encoder         : Lavf53.21.1
        copyright       : VSF

    This reveals a bug in ver 0.9.4 of Kdenlive - the full title is not placed in the metadata - it is truncated at the first space. This has been fixed in 0.9.5 of Kdenlive as Mantis number 2996.

    Пункт експортування звукових даних

    This is an unusual one. Instead of a normal on/off checkbox toggle, the Export Audio checkbox cycles among three choices.


    As if that weren't confusing enough, the Export audio (automatic) option may appear different depending on your combination of distribution, desktop environment and theme. See three examples below:

    Regardless of how the checkbox on the Export audio (automatic) option may appear on your installation, rest assured that when that option is showing, it is enabled.

    Отже, на що впливають ці три параметри?

    «Експортувати звук (автоматично)» означає, що програма має виявити звукову доріжку і записати її до результатів, якщо цю доріжку буде знайдено.

    «Експортувати звук», якщо позначено, означає, що програма має записати звукову доріжку до обробленого файла, навіть якщо нема звукових даних, які можна було б до неї записати.

    «Експортувати звук», якщо не позначено, означає, що програмі не слід записувати звукову доріжку до файла результатів.

    The difference in behavior between enabling Export audio versus Export audio (automatic) can be seen in the situation where you have a video on the timeline but there is no audio track on the timeline and the video in the video track also does not have an audio track. An example of such a situation is shown in the screenshot below.

    In this situation, if you render with Enable audio (automatic), the rendered file will not have an audio track (Result 1 on screenshot below). But if you render with Export Audio checked, then the rendered file will contain an audio track — the track will however be empty (Result 2 on screenshot below).

    FFprobe on file generated from an audio-less track using Export audio (automatic). Note only one stream — Stream #0.0 — a video stream. Kdenlive automatically detected there was not an audio track and so it did not write one.

    $ ffprobe dog_rotated_exp_audio_auto.mp4
    Metadata:
        major_brand     : isom
        minor_version   : 512
        compatible_brands: isomiso2avc1mp41
        encoder         : Lavf53.21.1
    Duration: 00:00:03.62, start: 0.000000, bitrate: 12592 kb/s
    Stream #0.0(und): Video: h264 (High), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 12587 kb/s, 27.83 fps, 27.83 tbr, 30k tbn, 55.66 tbc

    FFprobe on file generated from an audio-less track using Export audio checked. Note two streams — Stream #0.0 and Stream #0.1 — the latter being an aac audio track. We forced Kdenlive to write an audio track even though there was not any source audio to write.

    $ ffprobe dog_rotated_exp_audio.mp4
    Metadata:
        major_brand     : isom
        minor_version   : 512
        compatible_brands: isomiso2avc1mp41
        encoder         : Lavf53.21.1
      Duration: 00:00:03.62, start: 0.000000, bitrate: 12598 kb/s
    
    Stream #0.0(und): Video: h264 (High), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 12587 kb/s, 27.83 fps, 27.83 tbr, 30k tbn, 55.66 tbc
    Stream #0.1(und): Audio: aac, 48000 Hz, stereo, s16, 2 kb/s

    У випадках, коли є звукова доріжка...

    Rendering with Export audio unchecked will produce a file with no audio track — result 4 in the screenshot above. Rendering with Export audio (automatic) (result 3 in the screenshot above) or with Export audio checked will produce files with Audio tracks.

    Потоки кодування

    Determines the value of Encoding threads passed to melt. For encoding to certain codecs, namely MPEG-2, MPEG-4, H.264, and VP8, kdenlive can use more than one thread and thus make use of multiple cores. Increase this number to take advantage of this feature on multi-core machines. See melt doco - threads and melt FAQ on multi-threading.

    Спадний список сканування

    This option controls the frame scanning setting the rendered file will have. Options are Force Progressive, Force Interlaced and Auto.

    Auto causes the rendered file to to take the scanning settings that are defined in the project settings. Use the other options to override the setting defined in the project settings.