Kdenlive/Руководство/Монтажный стол/Редактирование

    From KDE UserBase Wiki
    Revision as of 15:50, 6 August 2017 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
    Other languages:

    Редактирование

    Editing is done in the Timeline. Add a clip by dragging it from the Project Tree or the Clip Monitor. Once a clip is dropped on a track, it can be moved (drag and drop it) to another place on the same track or onto another track.

    Навигация в проекте

    The timeline cursor shows your current position in the project. The positions of the cursors on the timeline ruler and Project Monitor are always in sync. Position can be moved in following ways:

    • Клавиши быстрого доступа: стрелки вправо / влево для одного кадра, Shift + вправо / влево для 1 секунды
    • Clicking/dragging in the Timeline ruler or in an empty area of the timeline.

    Резка клипа

    Чтоб разрезать клип самым простым способом - разместите Линию редактирования там, где вы хотите резать клип, затем выберите клип (щелкните левой кнопкой мыши в нем) и используйте меню Линия времени -> Текущий клип -> Разрезать клип (Timeline > Current Clip > Cut Clip) (горячие клавиши по умолчанию: Shift+R).

    Или Правой кнопкой -> Cut Clip

    Другой способ - используйте Инструмент Резак.

    Изменение размера (длительности) клипа

    A clip can be resized from its start or end by dragging its left or right edge. If you want a more precise resize, you can place the timeline cursor wherever you want the resize to end and use the menu Timeline->Resize Item Start (default shortcut: 1) or Timeline->Resize Item End (default shortcut: 2)

    To even more precisely control the length of a clip, double click it in the timeline and adjust its duration using the Clip duration dialog. You can have frame-level accuracy with this method.

    Вы также можете изменить размер клипа, отрезав его с помощью Инструмента Резак (Razor Tool) и затем удалив всё лишнее.

    Удаление промежутков между клипами

    Right click in the space between the clips and choose Remove Space. Be aware however that if you have clips on multiple tracks in the timeline and they are not grouped, then removing space may disturb the alignment of the clips between the different tracks — the space is only removed from the timeline where you clicked. Under this situation it may be safer to use the Spacer Tool.

    Middle Tool Bar

    There is a toolbar between monitors and the timeline that controls various aspects of the editor.

    Middle Toolbar ver 17.04


    1. Preview Quality Drop Down ( What does this do ? )

    2. Edit Mode Drop Down

    Note with ver 17.04 this mode is selected via a dropdown rather then toggle buttons.

    ver 17.04


    2a. Normal Mode

    2b. Overwrite Mode

    2c. Insert Mode

    These same settings can be found under the Tool menu.

    Tool Group (one of these 3 can be active)

    Active buttons are grey.

    3. Selection Tool

    4. Razor Tool

    5. Spacer Tool

    6. Position indicator - displays the time point or frame number of the location of the hovering mouse. Click on the widget to change the display between time and frame number

    7. Total length of the project

    8. Insert Clip Zone in Timeline. See Insert & Overwrite Advanced Timeline Editing on Kdenlive Home page.

    9. Overwrite Clip Zone in Timeline. See Insert & Overwrite Advanced Timeline Editing on Kdenlive Home page.

    10. Extract Timeline Zone

    11. Lift Timeline Zone

    12. Favourite Effects

    13. Start Preview Render

    14. Stop Preview Render

    15. Add Preview Zone

    16. Remove Preview Zone

    17. Remove All Preview Zones

    18. Automatic Preview

    19. Disable Timeline Preview

    20. Manage Cached Data

    Items 13-20 are covered by Timeline preview rendering article on the Kdenlive Home Page

    21. Smaller Tracks (see track resizing icon)

    22. Bigger Tracks (see track resizing icon)

    23. Use timeline zone / Don't use timeline zone for insert ( toggles). See Insert & Overwrite Advanced Timeline Editing on Kdenlive Home page.

    Bottom Tool Bar

    Bottom toolbar ver 17.04


    24. Split Audio and Video Automatically

    25. Automatic Transitions

    26. Show Video Thumbnails

    27. Show Audio Thumbnails

    28. Show Marker Comments

    29. Snap

    Zoom Tools

    30. Fit Zoom to Project

    31. Zoom Out

    32. Zoom Project

    33. Zoom In

    Button Descriptions

    Обычный режим

    In this edit mode you can not drag clips on top of other clips in the same track in the timeline. You can drag them to another track in the timeline but not into the same track at the same time point as an existing clip. Contrast this to overwrite mode.

    Режим перезаписи

    In this edit mode you can drag a clip onto a track where there is an existing clip and the incoming clip will overwrite that portion of the existing clip (or clips) covered by the incoming clip.

    Before
    After


    In the "After" screenshot above, you can see that the clip which was dragged from the upper track has replaced a portion of the clip on the lower track.

    Режим вставки

    Это ещё не реализовано.

    Before
    During

    Инструмент выбора

    Используйте для выбора клипов на монтажном столе (timeline). Курсор становится рукой, когда этот инструмент является активным.

    Резак

    Используйте это, для резки клипов на монтажном столе (timeline). Курсор становится ножницами, когда этот инструмент является активным.

    Вставка пробелов

    Используйте этот инструмент () для временной группировки отдельных клипов, и последующего перемещения их на монтажном столе (timeline), чтобы создать или удалить пустое пространство между клипами. Очень удобно. Поэкспериментируйте с этим инструментом, чтобы посмотреть как это работает.

    В приведенном выше примере, эти клипы не сгруппированы. Тем не менее инструмент вставки пробелов временно сгруппирует их для вас , так что вы сможете переместить их группой.

    Выровнять по размеру проекта

    Это изменит масштаб проекта так, что он весь уместится на монтажном столе. Эта же функция вызывается из меню Линии времени, пункт Выровнять по размеру проекта (Fit Zoom to Project).

    Масштабирование проекта

    The magnifying glasses zoom in or out on the timeline. The slider adjusts the zoom by large increments. These same settings are controlled by the Timeline menu items, Zoom In and Zoom Out.

    Автоматически разделять звук и видео

    When this is on and you drag a clip to the timeline, the audio in the clip will end up on an audio track and the video on a video track. You can achieve the same result if you select the clip, right click, Split Audio. When this is off and you drag a clip onto the timeline, both the audio and video tracks are combined into one video track.

    Automatic Transitions

    When active any transitions added to the time line will have the automatic transition option checked by default. See Automatic Transitions

    Показать миниатюры видео

    При включении, видеоклипы на монтажном столе, будут содержать эскизы и имя файла. Иначе просто имя файла.

    When the timeline is zoomed in to the maximum, the video track will show a thumbnail for every frame in the clip. When the timeline is not on maximum zoom, the video track will show a thumbnail for the first and last frame in the clip.

    Показать миниатюры аудио

    При включении, аудиоклипы на монтажном столе, будут содержать эскизы и имя файла. Иначе просто имя файла

    Показать комментарии маркеров

    This toggles on and off the display of the comments saved within markers (the text with the gold background in the example below) and within guides (the text with the purple background).

    Привязка

    When this feature is on, dragging the beginning of one clip near to the end of another will result in the end of the first clip snapping into place to be perfectly aligned with the beginning of the second clip. As you move the two ends near to each other, as soon as they get within a certain small distance, they snap together so there is no space and no overlap. Note that this occurs even if the clips are on different tracks in the timeline.

    Клипы будут также привязываться к позиции курсора, маркерам и направляющим.

    Cutting Footage from multiple aligned tracks - Ripple Delete

    This is available on the Timeline menu under All clips->Ripple Delete [1].

    Mark In and Out points in the Project Monitor, then choose Timeline->All clips->Ripple Delete (or Ctrl-X). Kdenlive deletes all footage between the In and Out points in unlocked tracks, slides everything else back to fill the gap, and puts the playhead on the In point.

    1. available on bleeding edge versions > 0.9.10 (Jan2015)