Kdenlive/Manuel/Titres

    From KDE UserBase Wiki
    Revision as of 00:10, 23 December 2019 by ChristianW (talk | contribs)

    Titres

    Les titres sont les éléments de texte qui peuvent être ajoutés à la chronologie, et apparaître au dessus d'autres clips. Les titres sont créés dans l'arbre de projet (Project Tree) et glissés ensuite sur la chronologie comme pour d'autres clips vidéo.

    Si vous voulez que des titres recouvrent d'autre séquences, vous mettez des clips titre sur la piste vidéo 1 et avoir l'autre séquence sur la piste vidéo 2. Vous devez aussi conserver la transition "affine" qui est automatiquement ajoutée aux clips titre, si vous voulez que la séquence soit visible en dessous.

    Pour créer un titre, choisir Ajouter un titre de clip (Add Title Clip) depuis le Menu Projet ou depuis le menu clic-droit via l'Arbre de projet

    Comment enregistrer un titre

    Ouvrez le titre dans l'Arbre de projet en double-cliquant ou en faisant un clic droit puis choisissez Propriétés du clip.

    Cliquez sur le bouton Enregistrer sous de la boîte à outils

    La barre d'outils de l'éditeur de titres, lorsque l'éditeur de titre est assez large pour que la barre d'outils entière puisse s'afficher.
    Les articles de barre d'outils sont : Selection Tool, Add Text, Add Rectangle, Add Image, Open Document, Save As


    or select Save as from the toolbar overflow menu which can be found under the >> button on the toolbar - see picture.

    Title Editor toolbar when title editor is not wide enough for the whole toolbar to display. The toolbar items that do not fit can be accessed from the >> button that appears at the end of the toolbar.

    Choose a save location within your project.

    Les titres sont sauvegardés sous forme de documents de type .kdenlivetitle.

    Comment charger un titre

    Choose Add Title Clip from the Add Clip drop down (see picture)

    Click the Open Document button on the Title Clip editor toolbar or choose Open document from the >> menu and load up a title saved earlier.

    Comment éditer un titre existant

    Right-click the title clip in the Project Tree and select Clip properties.

    Template Titles - User-Defined

    Template Titles allow you to create a template for other titles in your project. You create the template title with the settings that all the titles in the project should have and then base subsequent titles on the template. If you decide to change the look of your titles, you only need change the template title and the titles based on this template will automatically update to reflect any formatting changes you made to the template title.

    Pour créer un titre de modèle

    Choose Add Title Clip from the Add Clip drop down and create a title with the text %s in it and formatted how you desire it. Save this title as described above.

    Pour utiliser le titre du modèle

    Choose Add Template Title from the Add Clip drop down and choose the title with the %s in it that you just saved.

    Right-click this clip in the Project Tree and select Clip Properties,

    Enter the text that this title should display into the text field in the dialog that appears.

    Faites glisser le titre sur la chronologie.

    The %s in the template will be replaced with the text that you enter in the Clip Properties -> Text.

    A known issue with template titles is that text centering does not work correctly for text replacing the %s - see this forum post.

    Template Titles - Built In

    Kdenlive has some built-in title templates that can be accessed from the Template drop-down list found on the bottom of the Title Clip window - see below.

    To install more built-in title templates choose Download New Title Templates from the Settings menu.

    Les fichiers .kdenlivetitle uqi fournissent ces modèles sont installés dans /usr/share/kde4/apps/kdenlive/titles/

    Importer une image dans le titre

    On the Toolbar overflow menu (>>) shown in the picture below, the second menu item - (labeled only with Alt + I in ver 0.9.2 - fixed in ver 0.9.4) - is the Add Image Button. Selecting this brings up a file chooser where you can choose an image to be inserted into your title.

    Element de la boîte à outils pour dessiner un rectangle

    The 1st menu item shown in the picture above - (labeled only with Alt + R in ver 0.9.2 - fixed in ver 0.9.4) - is the Add Rectangle button. After selecting this, drag the mouse to draw a rectangle. Use the rectangle toolbar (shown below) to change the fill color, border color and border width of the rectangle.

    Les rectangles peuvent être placés derrière le texte en les sélectionnant puis en abaissant la valeur du Z-index (coin supérieur droit).

    Faire défiler le titre verticalement

    Mettez un long titre sur la fenêtre de titre. Faites zoom arrière afin que vous puissiez le voir en entier. Le texte devrait bouger en sortant par le haut (ou le bas) de la zone visible.

    Select the Animation tab and click Edit start. Now drag the start rectangle to above the viewable area.

    Selectionnez Fin d'édition et faites glisser la fin du rectangle sous le bas de la zone de visualisation.

    Cliquez sur OK et prévisualisez le titre déroulant.

    The text in the above title scrolls up the screen. It is as if the camera starts on the "start rectangle" and then pans down to the "end rectangle"

    To make the text scroll faster, change the duration field highlighted in red in the image above to a smaller value. To make the text scroll slower, change the duration to a larger value.

    Note: changing the length of the title clip on the timeline does not change the scrolling speed. If the length of the clip on the timeline is longer than the duration specified in the title editor, the titles will pause on the screen between the time the title's duration expires until the end of the clip.

    If the length of the clip on the timeline is shorter than the duration specified in the title editor, the scrolling will not complete before the title clip finishes.

    Remarque

    la description ci-dessus du comportement du titre en ce qui concerne la durée ne s'applique qu'aux titres qui ne sont pas modifiés après avoir été placés sur la chronologie. Si vous augmentez la longueur d'un clip de titre sur la chronologie, puis éditez le titre (en double-cliquant dessus dans l'arborescence du projet), sa durée apparente deviendra la longueur qu'il a actuellement sur la chronologie (c'est-à-dire que le défilement ne s'arrêtera plus à la fin) mais la durée affichée dans l'éditeur de titre n'aura pas changé.


    Faire défiler le titre horizontalement

    Use the instructions for vertical scrolling - just put the start and stop rectangles off to the sides of the screen rather than the top and bottom

    Comment faire apparaître/disparaître des titres en fondu (fade in/out)

    To make titles fade in and out, you modify the transition which gets automatically added between the title and the track below. The modifications consist of adding keyframes into the transition and adjusting the opacity of the transitions at these keyframes. In version 0.9.3 it is an affine transition that is automatically added between the title and the track below. In ver 0.9.2 it is a composite transition.

    In the image below we have four keyframes (labeled 1 to 4). The first keyframe is the one currently displayed and we can see that the opacity on this keyframe is zero. The opacity at keyframes 2 and 3 is 100%. The opacity at the 4th keyframe is zero percent. The overall effect is that the title fades in between keyframe 1 and keyframe 2. And then it fades out between keyframe 3 and keyframe 4 .

    Comment faire apparaître/disparaître plusieurs titres en fondu (fade in/out), séquentiellement

    Pour créer une séquence de titre comme celle-ci ...

    you put three titles on three different tracks but you make all three affine transitions go to the same empty video track (instead of the tracks directly below them, which is the default). See timeline screenshot below.

    FAQ

    Q: Comment dupliquer le clip d'un titre afin de légèrement le modifier.

    A: You can save a copy of the title (see How to Save a Title) and then create a new title based on that saved version as described above, Or you could use the template titles functionality to base the two slightly different titles on the one template.