|This manual is a rewrite of the 1.6 manual. It is not complete.|
If this is your first foray into digital painting, this page should give you a brief introduction about the basic but important concepts required for getting started with digital painting in Krita.
This page is very very long because it tries to cover all the important things you should know Krita is capable of, and Krita is really powerful. So this page can also be considered a guide through Krita's most important functionality. Hopefully it will help you grasp what buttons are for, even if you don't know the exact purpose of them.
Even though Krita is primarily a raster based application, but it also has some vector editing capabilities too. If you are new to Digital painting medium, it is necessary that you know the concepts of raster and vector.
In digital imaging, a pixel (Picture Element) is a basic and lowest element of an Image. It is basically a grid of points each displaying specific color. Raster editing is manipulating and editing these pixels. For example when you take a 1 pixel brush which is colored black and painting on the white canvas in Krita you are actually changing the color of the pixel beneath your brush from white to black.When you zoom in and see a brush stroke you can notice many small squares with colors, these are pixels
On the contrary vector graphic work based on mathematical expressions. They are independent of the pixel. For example when you draw a rectangle on a vector layer in Krita you are actually drawing paths passing through points called nodes which are located on a specific co-ordinates on 'x' 'y' axis, when you re-size or move these points the computer calculates and redraws the path and displays the newly formed shape to you. Hence you can re-size the vector shape to any extent without any loss in quality.
In Krita everything which is not on a vector layer is raster based.
In a painting program, there's three major containers that make up your work-space.
The most important one is the Image.
This is a individual copy of the image you opened or made via the file dialog, and where you edit your file. Krita can allow you to open the file as a new copy via the file menu, or to save it as a new file, or make an incremental save. An image contains layers, a colour space, a canvas size and meta-data such as creator, data created, and DPI. Krita can open multiple images at once, you can switch between them via themenu.
Because the image is a working copy of the image on the hard drive, you can do a lot of little saving tricks with it:
These options are great for people doing production work, who need to switch between files quickly, or have backup files in case they do something extreme. Krita also has a file-backup system in the form of auto-saves and back files and crash-recovery. You can configure these in the general settings.
You view the image via a View.
A view is the window onto your image. Krita allows you to have multiple views, and you can manipulate the view to zoom, rotate and mirror and modify the colour of the way you see an image without editing the image itself. This is very useful for artists, as changing the way they view the image is a common way to diagnose mistakes, like skewing to one side. Mirroring with m makes such skewing easy to identify.
If you have trouble drawing certain curves you will enjoy using rotation for drawing, and of course there is zooming in and out for precision and rough work.
Multiple views are possible in Krita via ctrl+tab, or keep them in the same area when subwindow mode is active in the settings, via .. You can switch between them via the menu, or
Dockers are little subwindows in Krita's interface. They contain useful tools, like the color selector, layer stack, tool options etc.
The image above shows some of the dockers in Krita
All the views and the dockers are held inside Windows
If you've used computer before, you know what windows are: They are big containers for your computer programs.
Krita allows you to have multiple windows via. You can then drag this to another monitor, for multi-monitor use.
The image below shows an example of multiple windows in Krita
When you create a new document in Krita for the first time you will see a rectangular white area. This is called a canvas. You can see it in the image below, The area marked by a red rectangle is a canvas.
When you save the painting as jpg , png etc or take a print out of the painting the content inside this area is taken into consideration, anything beyond it will be ignored. However Krita stores information beyond this area, you just wont be able to see it. This data is stored in the Layers.
Like a Landscape painter will first paint the sky, and then the furthest away elements before slowly working his way to the foreground elements, computers will do the same with all the things you tell them to draw. So, if you tell them to draw a circle after a square on the same spot, the circle will always be drawn later. This is called the Drawing Order.
The layer stack is a way for you to seperate out elements of a drawing, and manipulate the drawing order, by showing you which layers are drawn when, and allowing you to change the order they are drawn in, and all sorts of other effects. This is called Compositing.
This allows you to have line art above the colours, or trees before the mountains, and edit each without affecting the other.
Krita has many layer-types, each doing a slightly different thing:
You can see various types of Layers in the image below
You can manipulate the content of the layers with Tools.
Tools help you manipulate the image data. The most common one is of course, the freehand brush, which is the default when you open Krita. There's roughly five types of tools in Krita:
All tools can be found in the toolbox, and information can be found in the tools section of the manual.
Brush Engines, like mentioned before, take a path and tablet information and add effects to it, making a stroke.
Engine is a term programmers use to describe a complex interacting set of code that is the core for a certain functionality, and is highly configurable. In short, like the engine of your car drives your car, and the type of engine and it's configuration affects how you use your car, the brush engine drives the look and feel of the brush, and different brush engines have different results.
Krita has around a LOT of different brush engines, all with different effects.
For example, the pixel-brush engine is simple and allows you to do most of your basic work, but if you do a lot of painting, the color smudge brush engine might be more useful. Even though it's slower to use than the Pixel Brush engine, it's mixing of colors allows you to work faster.
If you want something totally different than that, the sketch brush engine helps with making messy lines, and the shape brush engine allows you to make big flats quickly. There's a lot of cool effects inside Krita's brush engines, so try them all out, and be sure to check the chapters on each.
You can configure these effects via the Brush Settings drop-down, which can be quickly accessed via f5. These configurations can then be saved into presets, which you can quickly access with f6 or the Brush Presets docker.
Brushes draw with colors, but how do computers understand colors?
Humans can see a few million colors, which are combinations of electromagnetic waves(light), bouncing off a surface, where the surface absorbs some of it.
When painting traditionally, we use pigments which also absorb the right light-waves for the color we want it to have, but the more pigments you stick together, the more light is absorbed, leading to black. This is why we call the mixing of paints subtractive, as it subtracts light the more pigments you put together. Because of that, in traditional pigment mixing, our most efficient primaries are three fairly light colours: Cyan blue and Magenta red and Yellow(CMY).
A computer also uses three primaries, and uses specific amount of each primary in a colour as the way it stores color. However, a computer is a screen that emits light. So it makes more light, which means it needs to do additive mixing, where adding more and more coloured lights result in white. This is why the three most efficient primaries, as used by computers are Red, Green and Blue(RGB).
Per pixel, a computer then stores the value of each of these primaries, with the maximum depending on the bit-depth. These are called the components or channels depending on who you talk to.
Though by default computers use RGB, they can also convert to CMYK (the subtractive model), or a perceptual model like LAB. In all cases this is just a different way on indicating how the colours relate to each other, and each time it usually has 3 components. The exception here is grayscale, because the computer only needs to remember how white a colour is. This is why grayscale is more efficient memory-wise.
In fact, if you look at each channel separately, they also look like grayscale images, but instead white just means how much Red, Green or Blue there is.
Krita has a very complex color management system, which you can read more about here.
Just like Red, Green and Blue, the computer can also store how transparent a pixel is. This is important for compositing as mentioned before. After all, there's no point in having multiple layers if you can't have transparency.
Transparency is stored in the same way as colors, meaning that it's also a channel. We usually call this channel the alpha channel or alpha for short. The reason behind this is because the letter 'a' is used to represent it in programming.
Some older programs don't always have transparency by default. Krita is the opposite: it doesn't understand images that don't track transparency, and will always add a transparency channel to images. When a given pixel is completely transparent on all layers, Krita will instead show a checkbox pattern, like the rose image to the left.
Because colours are stored as numbers you can do maths with them. We call this Blending Modes or Compositing Mode.
Blending modes can be done per layer or per brush stroke, and thus are also part of the compositing of layers.
Krita has 76 blending modes, each doing slightly different things. Head over to the Blending Modes page to learn more.
Because we can see channels as grayscale images, we can convert grayscale images into channels. Like for example, we can use a grayscale image for the transparency. We call these Masks.
Masks are a type of sub effect applied to a layer, usually driven by a grayscale image.
The primary type of mask is a transparency mask, which allows you to use a grayscale image to determine the transparency, where black makes everything transparent and white makes the pixel fully opaque.
You can paint on masks with any of the brushes, or convert a normal paint-layer to a mask. The big benefit on masks is that you can make things transparent without removing the underlying pixels. Furthermore, you can use masks to reveal or hide a whole group layer at once!
For example, we have a white ghost lady here:
But you can't really tell she's a ghost lady or just really really white. If only we could give the idea that she floats... We right-click the layer and add a transparency mask. Then, we select that mask and draw with a black and white linear gradient so that the black is below.
Wherever the black is, there the lady now becomes transparent, turning her into a real ghost!
The name mask comes from traditional masking fluid and film. You may recall the earlier comparison of selections to traditional masking fluid. Selections too are stored internally as grayscale images, and you can save them as a local selection which is kind of like a mask, or convert them to a transparency mask.
We mentioned earlier that you can do maths with colors. But you can also do maths with pixels, or groups of pixels or whole layers. In fact, you can make Krita do all sorts of little operations on layers. We call these operations Filters.
Examples of such operations are:
Krita has many more filter available, read about them here.
Because many of these operations are per pixel, Krita allows you to use the filter as part of the filter brush engine.
In most image manipulation software, these are separate tools, but Krita has it as a brush engine, allowing much more customisation than usual.
This means you can make a brush that desaturates pixels, or a brush that changes the hue of the pixels underneath.
Krita also allows you to let the Filters be part of the layer stack, via Filter Layers and Masks. Filter Layers affect all the layers underneath it in the same hierarchy. Transparency and transparency masks on Filter Layers affect where the layer is applied.
Masks on the other hand, can affect one single layer, and are driven by a grayscale image. They will also affect all layers in a group, much like a transparency mask.
We can use these filters to make our ghost lady look even more ethereal, by selecting the ghost lady's layer, and then creating a clone layer. We then right click and add a filter mask and use gaussian blur set to 10 or so pixels. The clone layer is then put behind the original layer, giving her a definite glow. You can keep on painting on the original layer and everything will get updated automatically!
Layer Effects or Layer Styles are Photoshop's unique brand of Filter Masks that are a little faster than regular masks, but not as versatile, they are available by right clicking a layer and selecting 'layer style'.
Transformations are kind of like filters, in that these are operations done on the pixels of an image. We have regular image and layer wide transformations in the image and layer top menus, so that you may resize, flip and rotate the whole image.
With this tool you can rotate and resize on the canvas, or put it in perspective. Or you can use advanced transform tools, like the warp, cage and liquefy, which allow you to transform by drawing custom points or even by pretending it's a transforming brush.
Like the filter brush engine, Krita also has a Deform Brush Engine, which allows you to transform with a brush. The deform is like a much faster version of the Liquefy transform tool mode, but in exchange, it's results are of much lower quality.
Furthermore, you can't apply the deform brush as a non-destructive mask.
Like filters, transforms can be applied as a non destructive operation that is part of the layer stack. Unlike filter and transparency masks however, transform masks can't be driven by a grayscale image, for technical reasons.
You can use transform masks to deform clone and file layers as well.
With all this technical stuff, you might forget that Krita is a painting program. Like how a illustrator in real life can have all sorts of equipment to make drawing easier, Krita also offers a variety of tools:
These guides are saved into Krita's native format, which means you can pick up your work easily afterwards.
This leads to the final concept: Customisation.
In addition to rearranging the dockers according to your likes, Krita provides an save your configurations as workspaces. This is the button on the top-right.
Krita also allows you to change all the shortcuts, via eitheror , and you can change the contents of the toolbar via .
In fact, check out the settings for more defaults of Krita that can be edited!