Revision as of 18:27, 2 July 2013 by Dimkard (talk | contribs) (Created page with "===Περιήγηση σε σελίδες===")
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎Nederlands • ‎Türkçe • ‎català • ‎dansk • ‎español • ‎français • ‎italiano • ‎Ελληνικά • ‎русский • ‎українська • ‎中文(中国大陆)‎ • ‎中文(台灣)‎ • ‎日本語

Ο KRunner αποτελεί τον ενσωματωμένο στην επιφάνεια εργασίας Plasma εκτελεστή. Ενώ η βασική του λειτουργία αποτελεί την εκκίνηση προγραμμάτων από μια μικρο-γραμμή εντολών, η λειτουργικότητά του μπορεί να επεκταθεί μέσω άλλων εκτελεστών που βοηθούν τον χρήστη στην επίτευξη πολλών λειτουργιών.



Αυτή η, μη ολοκληρωμένη δυστυχώς, λίστα, επιχειρεί να παρουσιάσει μερικά βασικά παραδείγματα χρήσης του KRunner. Ανακαλύψτε περισσότερα πατώντας στο εικονίδιο '?' του KRunner.

Έναρξη και τερματισμός εφαρμογών

Μπορείτε να εκτελέσετε εφαρμογές πληκτρολογώντας απλά το όνομα της εφαρμογής που επιθυμείτε να εκτελέσετε. Απαιτείται η πληκτρολόγηση τουλάχιστον τριών γραμμάτων για να αρχίσει να βρίσκει συσχετίσεις. Οι συσχετίσεις αφορούν τις εφαρμογές που βρίσκονται στο μενού εφαρμογών.


Είσοδος Έξοδος
gwe (εκτελεί το Gwenview)

Μπορείτε επίσης να χρησιμοποιήσετε τον KRunner για να τερματίσετε εφαρμογές. Πληκτρολογήστε τη λέξη κλειδί kill ακολουθούμενη από το όνομα της διεργασίας και ο KRunner θα σας δώσει την επιλογή να κλείσετε την εφαρμογή (SIGTERM) ή να την τερματίσετε βίαια (SIGKILL). Ο KRunner θα συσχετίσει τα μερικά ονόματα διεργασιών (τουλάχιστον τριών χαρακτήρων) με τις εκτελούμενες διεργασίες.

Σημειώστε πως η λέξη κλειδί kill μπορεί να αλλάξει στον εκτελεστή "Τερματισμός εφαρμογών" ώστε να αποφευχθεί σύγχυση με την εντολή κελύφους kill που δέχεται ως όρισμα τα αναγνωριστικά (ID) των διεργασιών.

Εκτέλεση εντολών κελύφους

Εκτός από τις εφαρμογές που βρίσκονται στο μενού εφαρμογών, ο KRunner μπορεί επίσης να χρησιμοποιηθεί για την εκτέλεση εντολών κελύφους, συμπεριλαμβανομένων των εκτελέσιμων προγραμμάτων. Σημειώστε πως κατά την καταχώρηση εντολών κελύφους, ο KRunner δεν επιδέχεται μερική πληκτρολόγηση εντολών και δεν προσφέρει αυτόματη συμπλήρωση.

Η εκτέλεση εντολών με αυτό τον τρόπο εμφανίζει το εικονίδιο με το γαλλικό κλειδί που προσφέρει επιπλέον επιλογές. Μπορείτε να επιλέξετε τη δημιουργία ενός νέου τερματικού και να εκτελέσετε εκεί την εντολή (αυτό είναι χρήσιμο αν η εντολή σας παράγει έξοδο κειμένου που επιθυμείτε να διαβάσετε), ή να επιλέξετε την εκτέλεση του προγράμματος ως διαφορετικός χρήστης (παρέχοντας το όνομα και τον κωδικό του συγκεκριμένου χρήστη).


Είσοδος Έξοδος
ls ~/Documents εμφανίζει τα περιεχόμενα του ~/Documents (καλύτερα σε τερματικό)
cp ~/Documents/myFile ~/myFile αντιγραφή του myFile από τα ~/Documents στο ~/
mplayer myMovie.mkv αναπαράγει το myMovie.mkv στον mplayer

Παρεμπιπτόντως, αν η γραμμή εντολών είναι το αγαπημένο σας πράγμα, μπορεί να εκτιμήσετε την ενσωμάτωση των σελίδων τεκμηρίωσης (man pages). Πληκτρολογήστε απλά το όνομα μιας εντολής βάζοντας μπροστά ένα # για να ανοίξει η σελίδα τεκμηρίωσης μορφοποιημένη για εύκολη ανάγνωση σε έναν περιηγητή.


Είσοδος Έξοδος
#ls ανοίγει το εγχειρίδιο της ls σε έναν περιηγητή

Περιήγηση σε σελίδες

You can simply start typing the URL of a website to open it in your default browser. You may even type in the name of a bookmark from Konqueror and KRunner will open it for you. If you have visited the website in the past, KRunner can fetch you results from your browser's history, too.


Input Output
myBookmark opens the bookmark in a browser opens the KDE homepage in a browser opens Userbase in a browser

KRunner already knows your web shortcuts in Konqueror, so you can directly start using them.


Input Output
gg:KDE searches Google for KDE
wp:krunner searches Wikipedia for krunner

KRunner also provides options to download files from the web using KGet by providing their URL.

Additional runners exist for fast searching on Wikipedia, Wikitravel and KDE Techbase.

Open files, folders and devices

KRunner can also open files and directories on your local machine for you. If you want to browse remote machines, you can do that, too. Notice how KRunner uses kioslaves for ssh (fish:) and samba (smb:).


Input Output
file:/home/ opens file:///home/ (the Home directory) in Dolphin
file:myMovie.mkv opens /home/myMovie.mkv
fish:[email protected] opens fish:/[email protected]/ via fish (file over ssh) protocol
smb:myWindowsBox opens smb:/myWindowsBox via Samba

If you don't know the path to a file, simply type the name of the file. If the file is a recently opened document, KRunner will list it for you. If you have the Nepomuk subsystem installed, you can also search your computer for the file by its indexed contents. KRunner will also open folders you've bookmarked in Dolphin (in your Places sidebar) if you type their name in. What's more, if you want to access devices on your system (both mounted and unmounted), you can do that, too. KRunner will even provide device-specific options.


Input Output
Home opens the Home directory in Dolphin
myFlashDrive shows options to mount or open the contents of myFlashDrive

Multitask with sessions, windows, desktops and activities

Several KDE applications allow you to save and load sessions. KRunner allows you to launch these sessions. You can either type in the name of the application or directly type in the name of the session. Runners exist for opening sessions saved in Kate, Konqueror, Konsole, etc.

KRunner is a multitasker's dream. If you have too many windows open, just type in the title of the window and switch directly to it. You can similarly type in the name of a virtual desktop and switch directly to it. If you roll with activities, switch activities by typing their name in. KRunner will find a match as soon as you type three characters in.

KRunner will even switch desktop sessions for you. Type in the keyword switch or new session to start a separate X session. You can switch back and forth between sessions by using the switch keyword.


Input Output
Desktop 1 switches the virtual desktop to Desktop 1
myWorkActivity switches the activity to myWorkActivity
switch shows options to switch to an existing session or start a new one

Several plasma widgets can be launched as windowed applications. You can simply type the name of a widget and KRunner will launch a window for you.

Talk to people

Type in the name of a contact in your KAddressBook to get a list of options to contact them. Typing in an email address into KRunner will open a KMail composer window. You can also search through contacts in your Kopete contact list.

The addressbook and kopete runners don't seem to be working in SC 4.8.


Input Output
[email protected] compose a mail to the KDE mailing list
myContact show options to contact myContact

Listen to some music

You can control any modern audio player such as Amarok using krunner. You can use several keywords (all configurable) to play, pause or skip songs. Typing in the name of an artist, album or song that is in Amarok's library will let you either play immediately, play next (queue) or play at the end (append) of the current playlist. You can use keywords to increase or decrease the volume of the player, or even to mute or quit it.


Input Output
play song search plays a song immediately
pause pauses Amarok or your designated music player
next plays next song in playlist

Be on time

You can get the current date or time by typing in the keywords date or time. Selecting the result will copy it to your clipboard so you can paste it elsewhere. The format of the date and time respects your system settings.


Input Output
date Today's date is ...
time The current time is ...

You can even get the date and time at another location by specifying the time zone or the city listed in the TZ database.


Input Output
time UTC The current time in UTC is ...
time oslo The current time in Europe/Oslo is ...
time kolkata The current time in Asia/Kolkata is ...

There is a runner for interfacing with Korganizer and fetching events, but it doesn't seem to be working in SC 4.8.


KRunner features a very versatile calculator that can be called by starting or ending a calculation with an = sign. In addition to basic arithmetic, you can call scientific functions like sqrt(), sin(), log(), etc. A list of the supported functions is here. Note that trigonometric functions like sin(), cos(), etc expect the angle in radians. KRunner understands pi in expressions.


Input Output
32*12 = 384
= sqrt(4) + 32*sin(30*pi/180) 18

KRunner can also handle symbolic mathematics and perform integration and differentiation on expressions


Input Output
= integrate( -x/y^2, y ) -x/y
diff( log(x) ) = 1/x

You can also use KRunner to solve polynomial functions to find its roots.


Input Output
= solve( x^2 + 4*x - 21 = 0 ) [7, -3]

KRunner intelligently handles units as part of the calculations. Try the following examples to see how.


Input Output
= 2.5 kg * 10 m/s^2 25 N
220 V / 10 A = 22 ohms

Since KRunner understands most units, you can use it to convert them very quickly. Note that unit conversions don't require an = sign.


Input Output
30 F -1.11111 degrees C (°C), 273.039 K, ...
27.8 km 1.09449e+06 inches (in), 17.2742 miles (mi), ...
5 gallons in liters 18.9271 liters (l)

KRunner knows currencies, too. Conversions between currencies is done by fetching the exchange rate from the European Central Bank website.


Input Output
1 dollar 0.657002 pounds sterling (GBP), 0.742501 euros (EUR), ...
125 euros 110.606 pounds sterling (GBP), 15,785 yen (JPY), ...
30 JPY in RUB 9.40731 rubles (RUB)

Go places

If you have bookmarked locations in the Marble (in OpenStreetMap), KRunner can open the map directly.

Spell checking and special characters

KRunner can tell you whether your spelling is correct and/or suggest corrections. The default keyword to start the spellchecker is spell and can be configured.


Input Output
spell linux Suggested words: Linux, lynx, ...

KRunner can also allow you to pick special characters if you can specify the hexadecimal unicode for the character, preceded by a # sign.


Input Output
#03b2 β
#00b1 ±

Manage your computer

You can directly open system settings control modules from KRunner. Often, if you want to change something, just type associated terms and KRunner will find the control module with the settings you want.


Input Output
keyboard opens the Keyboard settings control module
fonts opens the fonts settings control module
password opens the Password & User account control module

KRunner can also be used to adjust the screen brightness by using the keywords "screen brightness". You can specify a percentage or just turn the brightness halfway or fully down. Additionally, keywords exist to suspend, logout, shutdown or restart your machine.


Input Output
screen brightness 100 increases screen brightness to 100%
sleep suspends computer to RAM
lock locks the screen


Open KRunner

The easiest way to open KRunner is to trigger its global shortcut (Alt+F2, by default). In some activities (e.g. Desktop), you can simply click on the desktop and start typing. In others (e.g. Search and Launch), KRunner may be built into the activity itself.

You can also right-click on your plasma workspace and select Run Command... or just simply launch it from the commandline by typing krunner.

Use KRunner

Use Tab or Shift+Tab to navigate up and down results. Use arrow keys to move between options (if any) in a result. Use Enter (or left click) to select a result.

Discover KRunner

Click on the wrench icon to bring up configuration options where you can enable/disable/configure runners that will process your searches. Additional options are available to change the position on the screen where krunner appears. You can even change the style to a task-oriented interface, if you like.

Clicking on the waveform icon will open the System Monitor.

Clicking on the '?' icon opens a scrollable list that explains the syntax of all the available runners. This is a good way to discover new functionality!

Tips, Tricks and FAQs

You can use KRunner in a special "single runner" mode. While in this mode, krunner will only have one active runner to process your searches. This feature isn't supported by all runners, but quite a few already do. Open the global keyboard shortcuts control module directly from krunner and choose the "Run Command Interface" to see what's available. Set a global shortcut for the mode you want and launch krunner in that mode. You can have as many modes as you can find shortcuts for. Face-smile.png

This blog covers some of the advanced usage of the calculator runner.

Content is available under Creative Commons License SA 4.0 unless otherwise noted.