System Settings/Printers/zh-tw: Difference between revisions

From KDE UserBase Wiki
m (Created page with "使用該程序是一組簡單的步驟。 * KDE Kickoff -> 計算機-> 系統設置-> Printer Configuration * 一旦打開Printer Configuration 工具,點按鈕添加一台...")
m (Created page with "這裡的例子中,我有一台HP Laserjet 2100M 打印機,是用打印機上的小型打印服務器直接連接到我的網絡中。")
Line 31: Line 31:
* 你的電腦會搜索局域網內其它電腦共享的或是直接連接到網絡的打印機。
* 你的電腦會搜索局域網內其它電腦共享的或是直接連接到網絡的打印機。


In this example, I have an ''HP Laserjet 2100M'' which is connected directly to my network using a small print server on the printer.
這裡的例子中,我有一台HP Laserjet 2100M 打印機,是用打印機上的小型打印服務器直接連接到我的網絡中。


The next illustration also shows that I have another computer sharing two printers on a ''Toshiba'' laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.
The next illustration also shows that I have another computer sharing two printers on a ''Toshiba'' laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.

Revision as of 15:22, 27 March 2011

Printer Configuration

用這個工具連接到打印機,設定相關選項

特性列表

  • 添加打印機
  • 給打印機命名便於區分
  • 打印機測試和維護
  • 移除打印機


附注

USB 打印機如果直接插到電腦上可能會被KDE 工具自動識別並安裝完成設定。即使你拔掉了USB 打印機,它仍會出現在printer configuration 列表中。


When a printer is not attached directly to your computer with a USB cable, you will need to use the Printer Configuration utility to add the printer, such as when another computer has shared a printer, or you want to connect directly to a printer that is networked with a print server.

舉例

照這些步驟做添加網絡打印機。開始前收集打印機的信息(make,模式model,IP 編號IP number 等等)。

使用該程序是一組簡單的步驟。

  • KDE Kickoff -> 計算機-> 系統設置-> Printer Configuration
  • 一旦打開Printer Configuration 工具,點按鈕添加一台打印機(查找,點擊“下一步”)
  • 你的電腦會搜索局域網內其它電腦共享的或是直接連接到網絡的打印機。

這裡的例子中,我有一台HP Laserjet 2100M 打印機,是用打印機上的小型打印服務器直接連接到我的網絡中。

The next illustration also shows that I have another computer sharing two printers on a Toshiba laptop. If I wanted to use either of them, that other computer would need to be on for the printer to work. Remote printers work best if directly connected to the network or are connected to a dedicated print server computer.


  • I choose AppSocket/JetDirect which is the choice for my HP/printserver.


  • I enter the IP address number in the Host blank (Currently, the Printer Configuration tool does not identify what that number is, so you will need to ask your network administrator what the IP address is).
  • Choose the manufacturer (Mine is HP)
  • Choose the model (HP has many)
  • Choose the recommended Driver unless you have a reason to do otherwise.
  • Give the printer a useful name since "printer" may not be good enough.
  • Give a description including the physical location if not in your own room.
  • The "Location" defaults to your computer's name in case you decide to share it later. Sharing is one of the options of the printer configuration tool.

On the configuration screen, you will now see a new "Local Printer" because the printer is "attached" to your computer. If you have more than one printer, you should be sure to thoughtfully select one as the default. You might not want to set the big high speed departmental printer/copier in the department manager's office as your default if you have a small printer hooked directly to your computer.

Tip

It is always wise to print a test page from the printer configuration tool.