Archive:Http://userbase.kde.org/Akonadi 4.4/Troubleshooting: Difference between revisions

From KDE UserBase Wiki
m (Minor corrections)
m (Text replace - "</translate>" to " ")
 
(112 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{Template:I18n/Language Navigation Bar|Akonadi 4.4/Troubleshooting}}
<languages />
==Introduction== <!--T:1-->


==Introduction==
<!--T:2-->
This page is mainly concerned with troubleshooting Akonadi, as there are inevitable glitches in early stages of migration.  For many people the first signs of Akonadi activity will be in KDE SC 4.4, and many will be confused by it.  For a brief description of the purpose of Akonadi, see '''[[Glossary#Akonadi|this Glossary entry]]'''.  You will also find useful links to further reading.  Once the inevitable teething troubles are over Akonadi will provide a power-house usable by many applications.
This page is mainly concerned with troubleshooting '''Akonadi''', as there are inevitable glitches in early stages of migration.  For many people the first signs of '''Akonadi''' activity will be in '''KDE SC 4.4''', and many will be confused by it.  For a brief description of the purpose of '''Akonadi''', see [[Glossary#Akonadi|this Glossary entry]].  You will also find useful links to further reading.  Once the inevitable teething troubles are over, '''Akonadi''' will provide a power-house usable by many applications.


===Understanding the Structure===
===Understanding the Structure=== <!--T:3-->
You can, of course, simply use Kontact to manage all your addressbook, but if you have a backup system in place, for instance, you'll want to know where your data is, and how it's handled.  The page '''[[Akonadi_and_AddressBook]]''' will help.


== Troubleshooting Tips ==
<!--T:4-->
* When reporting problems with the Akonadi server, always include the comprehensive self-test report. This report can be obtained from the self-test dialog which shows up whenever the Akonadi server was unable to start successfully. You can find the selftest dialog in the kcmmodule that is accessable via 'kcmshell4 kcm_akonadi'.
You can, of course, simply use '''Kontact''' to manage all your addressbooks, but if you have a backup system in place, for instance, you'll want to know where your data is, and how it's handled.  The page [[Akonadi_and_AddressBook|Akonadi and AddressBook]] will help.


* Starting the Akonadi server manually on the command line can result in additional useful information. This can be done by running '''akonadictl start''' on a console. Similar, with '''akonadictl stop''' the Akonadi server can be stopped again.  '''akonadictl status''' gives more useful information.
== Troubleshooting Tips == <!--T:5-->


==Common Problems==
<!--T:6-->
* When reporting problems with the '''Akonadi''' server, always include the comprehensive self-test report. This report can be obtained from the self-test dialog which shows up whenever the '''Akonadi''' server was unable to start successfully. You can find the selftest dialog in the kcmmodule that is accessable via:
{{input|1=kcmshell4 kcm_akonadi}}
<!--T:7-->
* Starting the '''Akonadi''' server manually on the command line can result in additional useful information. This can be done by running the following command on a console:
{{input|1=akonadictl start}}
<!--T:109-->
Similarly, with this command the Akonadi server can be stopped again:
{{input|1=akonadictl stop}}
<!--T:110-->
This command gives more useful information:
{{input|1=akonadictl status}}
==Common Problems== <!--T:8-->


===Kontact doesn't start - and doesn't tell me anything===
===Kontact doesn't start - and doesn't tell me anything=== <!--T:9-->
If Kontact doesn't start, and you see no error messages, check that Akonadi is running.  Akonadi should start on demand.  If yours doesn't, you will have to start it before Kontact will start up if you have any migrated resources (most likely KAddressBook).  Use the AkonadiTray icon (get this by typing 'akonadi' into KRunner) or type the commands into konsole to start it.


===Kontact doesn't start - version II===
<!--T:10-->
Kontact has been known to be hit after an update.  If this happens, try starting KMail, KOrganizer or any of the other applications from KRunner (or Konsole).  Chances are high that they will work as stand-alone apps while you find what went wrong.  This mainly affects version 4.4.0.
If '''Kontact''' doesn't start, and you see no error messages, check that '''Akonadi''' is running.  '''Akonadi''' should start on demand.  If yours doesn't, you will have to start it before '''Kontact''' will start up if you have any migrated resources (most likely '''KAddressBook''').  Use the ''Akonadi Tray icon'' (get this by typing "akonadi" into '''KRunner''') or type the commands into '''konsole''' to start it.


===Folder not found: "/Local"===
===Kontact doesn't start - version II=== <!--T:11-->
Some people have reported this error, when Kontact would not start.  There seems to be a bug in the migration that is telling KMail to look for local mail in ~/.local/share/Local, a directory that had not been set up.  The cure for this is not to attempt to correct it, but, with KMail/Kontact closed, to open the Akonadi Console (user krunner, Alt-F2, or 'akonadiconsole' in konsole), and remove the resource that it says is for local mail.  You should now find that you can start Kontact or KMail, and that a new resource will be created, pointing to ~/.local/share/local-mail


===There are other new folders under ~/.local/share/===
<!--T:12-->
'''Kontact''' has been known to be hit after an update.  If this happens, try starting '''KMail''', '''KOrganizer''' or any of the other applications from '''KRunner''' (or '''Konsole''').  Chances are high that they will work as stand-alone apps while you find what went wrong.  This mainly affects version 4.4.0.
 
===Folder not found: "/Local"=== <!--T:13-->
 
<!--T:14-->
Some people have reported this error, when '''Kontact''' would not start.  In some early versions of 4.4 there seems to be a bug in the migration that is telling '''KMail''' to look for local mail in ~/.local/share/Local, a directory that had not been set up.  The solution for this is not to attempt to correct it, but, with '''KMail'''/'''Kontact''' closed, to open the '''Akonadi Console''':
* Use '''krunner''', Alt-F2, or
* "akonadiconsole" '''konsole'''
 
<!--T:111-->
Then remove the resource that it says is for local mail.  You should now find that you can start '''Kontact''' or '''KMail''', and that a new resource will be created, pointing to ~/.local/share/local-mail
 
===There are other new folders under ~/.local/share/=== <!--T:15-->
 
<!--T:16-->
Yes.  If your addressbook has migrated correctly a new resource will have been created as ~/.local/share/contacts/
Yes.  If your addressbook has migrated correctly a new resource will have been created as ~/.local/share/contacts/


===What are /usr/bin/akonadi_maildir_resource and /usr/bin/akonadi_maildispatcher_agent?===
===What are /usr/bin/akonadi_maildir_resource and /usr/bin/akonadi_maildispatcher_agent?=== <!--T:17-->


The akonadi_maildir_resource is created automatically by the akonadi_maildispatcher_agent, while the latter is always started together with the Akonadi server as it provides basic functionality (e.g. sending mail) that is used by all mail applications that are (and will be) based on Akonadi. So it is ok that these two are running, as a user you can simply ignore them.
This autogenerated akonadi_maildir_resource will always point to ~/.local/share/local-mail/ which is your 'Local folders' account where your local folders and emails will be stored.


At this point, in KDE SC 4.4, mail is not yet being migrated.
<!--T:18-->
The ''akonadi_maildir_resource'' is created automatically by the ''akonadi_maildispatcher_agent'', while the latter is always started together with the ''Akonadi server'' as it provides basic functionality (e.g. sending mail) that is used by all mail applications that are (and will be) based on '''Akonadi'''. So it is ok that these two are running, as a user you can simply ignore them.
This autogenerated akonadi_maildir_resource will always point to ~/.local/share/local-mail/ which is your "Local folders" account where your local folders and emails will be stored.


===Nepomuk Indexing Agents have been Disabled===
<!--T:19-->
Kontact is now working, but you keep seeing this notice:
At this point, in '''KDE SC 4.4''', mail is not yet being migrated.


===Nepomuk Indexing Agents have been Disabled=== <!--T:20-->
<!--T:21-->
'''Kontact''' is now working, but you keep seeing this notice:
<!--T:22-->
[[image:NepomukError.png|418px|center]]
[[image:NepomukError.png|418px|center]]


The most common reason for this notice is that Nepomuk is simply disabled in System Settings. Please try enabling it in System Settings under Advanced / Desktop Search / Basic Settings by checking "Nepomuk Semantik Desktop" and clicking Apply.
<!--T:23-->
The most common reason for this notice is that '''Nepomuk''' is simply disabled in '''System Settings'''. Please try enabling it in '''System Settings''' under <menuchoice>Advanced -> Desktop Search -> Basic Settings</menuchoice> by checking "Nepomuk Semantik Desktop" and clicking "Apply".
 
<!--T:24-->
If this does not help (or if the option was already checked when you got the error) and if you have previously been using prereleases of '''KDE SC 4.4''', you may be affected by a change to the database layout (due to an upgrade of the '''Virtuoso''' database server from version 5 to version 6; production releases of '''KDE SC 4.4''' are expected to be shipped with '''Virtuoso''' version 6). The following commands should get it working again:
 
<!--T:97-->
{{input|1=qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
rm -r ~/.kde/share/apps/nepomuk
rm -r ~/.kde4/share/apps/nepomuk
nepomukserver}}
 
<!--T:123-->
Note that the above commands will '''not''' enable '''Nepomuk''' permanently if it isn't already enabled, you have to use '''System Settings''' for that.
 
<!--T:25-->
A running '''Nepomuk''' is necessary to have a working '''Akonadi''', and thus a working '''Kontact'''.  However, you can disable the '''Strigi''' file indexer, which is not needed for '''Kontact'''. '''Strigi''' file indexing is used for desktop searching only, which is unrelated to '''Kontact'''. Just make sure '''Nepomuk''' itself is running correctly for '''Kontact'''.
 
<!--T:26-->
In '''Kontact''', '''Nepomuk''' is used for many different things, ranging from displaying upcoming birthdays, over handling free/busy lists to showing a contact photo in the message viewer. If '''Nepomuk''' is not running, several different things in '''Kontact''' will cease to work. The notice is there to warn you about the reduced functionality. Enabling '''Nepomuk''' as described above fixes the problem.


If this does not help (or if the option was already checked when you got the error) and if you have previously been using prereleases of KDE SC 4.4, you may be affected by a change to the database layout (due to an upgrade of the Virtuoso database server from version 5 to version 6; production releases of KDE SC 4.4 are expected to be shipped with Virtuoso version 6). The following commands should get it working again:
<!--T:27-->
{|style="width:98%; border:2px dotted #BCBCBC; background:#EEEEEE;"
You can check if '''Nepomuk''' is correctly running by typing:  
| qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
{{input|1=akonadictl status}}
|-
| rm -r ~/.kde/share/apps/nepomuk
===I want to use my current Address Book and Organizer - Can I?=== <!--T:28-->
|-
| rm -r ~/.kde4/share/apps/nepomuk
|-
| nepomukserver
|}
Note that the above commands will '''not''' enable Nepomuk permanently if it isn't already enabled, you have to use System Settings for that.


A running Nepomuk is necessary to have a working Akonadi, and thus a working KontactHowever, you can disable the Strigi file indexer, which is not needed for Kontact. Strigi file indexing is used for desktop searching only, which is unrelated to Kontact. Just make sure Nepomuk itself is running correctly for Kontact.
<!--T:29-->
Yes.  When you use the ''Akonadi Console'' to add a resource it allows you to choose as ''Standard Addressbook'' - point that to your std.vcf should work fine.  Migration does not destroy your old addressbook.  You can continue to use it, though you will lose any benefits that '''Akonadi''' can bringAlternatively you can have both an '''Akonadi''' addressbook and your original one, for a time, if you feel safer that way.


In Kontact, Nepomuk is used for many different things, ranging from displaying upcoming birthdays, over handling free/busy lists to showing a contact photo in the message viewer. If Nepomuk is not running, several different things in Kontact will cease to work. The notice is there to warn you about the reduced functionality. Enabling Nepomuk as described above fixes the problem.
===I can't see any details in my Address Book=== <!--T:30-->


You can check if Nepomuk is correctly running by typing ''akonadictl status''.
<!--T:31-->
At the moment, the cause of this is not identified, but the cure is simple.  Close '''Kontact''', and start '''KAddressBook''' as a stand-alone application.  After you close it you will be able to use it within '''Kontact'''.  It seems that something is not being triggered when '''Kontact''' launches, and I expect this to be identified and fixed soon.  This seems to mainly affect version 4.4.0.


===I want to use my current Address Book and Organizer - Can I?===
===My contacts don't show when I use the Select button in KMail=== <!--T:32-->
Yes.  When you use the Akonadi Console to add a resource it allows you to choose as Standard Addressbook - point that to your std.vcf should work fine.  Migration does not destroy your old addressbook.  You can continue to use it, though you will lose any benefits that Akonadi can bring.  Alternatively you can have both an Akonadi addressbook and your original one, for a time, if you feel safer that way.


===I can't see any details in my Address Book===
<!--T:33-->
At the moment, the cause of this is not identified, but the cure is simpleClose Kontact, and start KAddressBook as a stand-alone applicationAfter you close it you will be able to use it within Kontact.  It seems that something is not being triggered when Kontact launches, and I expect this to be identified and fixed soonThis seems to mainly affect version 4.4.0.
Check <menuchoice>System Settings -> Advanced tab -> KDE Resources</menuchoice>Make sure that your '''Akonadi''' controlled address book(s) are listed there - add them if necessaryAt the same time, it's a good idea to make your main '''Akonadi''' addressbook, usually called "Personal Contacts", is set to be the defaultMore details of how this can be found in [[Special:myLanguage/KAddressBook_4.4#Setting_up_your_New_AddressBook|here]].


===My contacts don't show when I use the Select button in KMail===
===How do I get my Groupware addressbook back?=== <!--T:34-->
Check System Settings > Advanced tab > KDE Resources.  Make sure that your Akonadi controlled address book(s) are listed there - add them if necessary.  At the same time, it's a good idea to make your main Akonadi addressbook, usually called Personal Contacts, is set to be the default.  More details of how this can be found in [[KAddressBook_4.4#Setting_up_your_New_AddressBook|here]].


===How do I get my Groupware addressbook back?===
<!--T:35-->
Two solutions: using the old framework or the new one.
Two solutions: using the old framework or the new one.


Old framework: In akonadiconsole, add a "KDE Address Book (traditional)".  The KDE Address Book means you can set up old kresources for Akonadi.  In the configuration of "KDE Address Book (traditional)", you point it to an "IMAP over KMail" KResource and in KMail, the groupware options should be enabled.  This should work for Kolab, eGroupware and similar addressbooks - you will need to check the options to make sure that the correct type is selected.
<!--T:36-->
Old framework: In ''akonadiconsole'', add a "KDE Address Book (traditional)".  The KDE Address Book means you can set up old kresources for '''Akonadi'''.  In the configuration of "KDE Address Book (traditional)", you point it to an "IMAP over KMail" ''KResource'' and in '''KMail''', the groupware options should be enabled.  This should work for '''Kolab''', '''eGroupware''' and similar addressbooks - you will need to check the options to make sure that the correct type is selected.


New framework (only tested with Kolab): In the Akonadi configuration module (run 'kcmshell4 kcm_akonadi' to see it), add an "IMAP E-Mail Server" resource, and set up your mail server name, username and password, then click Auto-Detect. Then add a Kolab resource. The next step is to wait for the imap resource to synchronize, this can take quite a long time. The status will appear in the Akonadi configuration module. If nothing happens, try restarting akonadiserver. After some time the Kolab addressbook(s) should appear in KAddressBook.
<!--T:37-->
New framework (only tested with '''Kolab'''): In the '''Akonadi''' configuration module add an "IMAP E-Mail Server" resource, and set up your mail server name, username and password, then click '''Auto-Detect'''. Run this command to see it:
{{input|1=kcmshell4 kcm_akonadi}}
<!--T:112-->
Then add a '''Kolab''' resource. The next step is to wait for the imap resource to synchronize, which can take quite a long time. The status will appear in the '''Akonadi''' configuration module. If nothing happens, try restarting '''akonadiserver'''. After some time the '''Kolab''' addressbook(s) should appear in '''KAddressBook'''.


===You experience long delays when sending mail===
<span id="You experience long delays when sending mail"></span>
This is accompanied by KMail freezing until the mail is actually dispatched.


A bug has been found in the way Nepomuk checks addresses, which can cause huge delays.  This is fixed for SC 4.4.1.  If you cannot get 4.4.1 yet, there is this work-around:
===You experience long delays when sending mail=== <!--T:38-->


Close Kontact or KMail and KAddressbook if you are running
<!--T:39-->
stand-alone apps.  Disable Strigi in SystemSettings.  Stop Nepomuk, delete the
This is accompanied by '''KMail''' freezing until the mail is actually dispatched.
database and restart ''nepomukserver''. The actual commands you need are (as
user)


{|style="width:98%; border:2px dotted #BCBCBC; background:#EEEEEE;"
<!--T:40-->
|qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
A bug has been found in the way '''Nepomuk''' checks addresses, which can cause huge delays. This is fixed for SC 4.4.1. If you cannot get 4.4.1 yet, there is this work-around:
|-
|rm -r ~/.kde/share/apps/nepomuk
|-
|rm -r ~/.kde4/share/apps/nepomuk
|-
|nepomukserver
|}


<!--T:41-->
Close '''Kontact''', or '''KMail''' and '''KAddressbook''' if you are running
stand-alone apps.  Disable '''Strigi''' in '''SystemSettings'''.  Stop '''Nepomuk''', delete the database and restart '''nepomukserver'''.  The actual commands you need are (as user):
<!--T:42-->
{{input|1=qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
rm -r ~/.kde/share/apps/nepomuk
rm -r ~/.kde4/share/apps/nepomuk
nepomukserver}}
<!--T:43-->
This will, of course, wipe out all the database, including any tags you've  
This will, of course, wipe out all the database, including any tags you've  
added.  In theory, I understand that it's possible to do a more selective wipe  
added.  In theory, I understand that it's possible to do a more selective wipe  
Line 99: Line 152:
[http://techbase.kde.org/Development/Tutorials/Metadata/Nepomuk/TipsAndTricks#Remove_all_Strigi-indexed_data this page]
[http://techbase.kde.org/Development/Tutorials/Metadata/Nepomuk/TipsAndTricks#Remove_all_Strigi-indexed_data this page]


== Some Technical Issues ==
===IMAP Resource always claims to be offline=== <!--T:119-->
=== Nepomuk ===
 
Starting with KDE 4.4, it is required that Nepomuk is running in order for Akonadi to work correctly. Akonadi will check this and display an error dialog on startup if this is not the case.
<!--T:136-->
Even though the system has an internet connection, the IMAP resource refuses
to switch to online state.
 
<!--T:120-->
This bug is caused by a misconfigured NetworkManager installation on your system. Check the output of the following command:
 
<!--T:147-->
{{input|1=qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.NetworkManager.state}}
 
<!--T:148-->
You can get any of the following values:
 
<!--T:149-->
* '''20''' (formerly ''4''), '''disconnected'''. If you have access to the internet, your NetworkManager configuration must be wrong.
 
<!--T:150-->
* '''70''' (formerly ''3''), '''connected'''. The problem must be somewhere else.
**It might be that one or more '''network interfaces''' are '''not controlled by NetworkManager'''. If that is your case, give the control of those interfaces to NetworkManager. It might be as simple as removing the entries for the interfaces from a text file (for example, <tt>/etc/network/interfaces</tt>). Check the help resources provided by your software distribution for more information.
 
=== Can't read  any details of some messages or big delays to read it === <!--T:137-->
 
<!--T:138-->
if you aren't able to read some emails and see a message with " please wait ... ", you may logout and login KDE session to reinitialize all processes, might help.
 
== Some Technical Issues == <!--T:44-->
 
=== Nepomuk === <!--T:45-->
 
<!--T:46-->
Starting with KDE 4.4, it is required that '''Nepomuk''' is running in order for '''Akonadi''' to work correctly. '''Akonadi''' will check this and display an error dialog on startup if this is not the case.
 
<!--T:47-->
'''Nepomuk''' only works with the '''Virtuoso''' backend.
You can check whether the '''Nepomuk''' is running with the correct backend by using the '''Akonadi''' self-test dialog, as described above.
 
<!--T:48-->
Although '''Nepomuk''' is required to be running, you can still disable '''Strigi''' file indexing, which is usually the most resource-intensive part of the '''Nepomuk''' framework.


Nepomuk only works with the Virtuoso backend.
=== Apparmor === <!--T:49-->
You can check whether the Nepomuk is running with the correct backend by using the Akonadi self-test dialog, as described above.


Although Nepomuk is required to be running, you can still disable Strigi file indexing, which is usually the most resource-intensive part of the Nepomuk framework.
<!--T:50-->
Some distributions using '''Apparmor''' have it set up in a way that prevents '''Akonadi''' from running its internal database server. This can result in a variety of fuzzy error messages, including but not limited to the following:
{{output|1=unknown error 255 when running akonadictl
"DB error: 'Could not open required defaults file: /home/$username/.local/share/akonadi/mysql.conf"}}


=== Apparmor ===
<!--T:51-->
Some distributions using Apparmor have it set up in a way that prevents Akonadi from running its internal database server. This can result in a variety of fuzzy error messages, including but not limited to the following:
You can solve this by running the following command with root privileges then reload apparmor:  
* unknown error 255 when running akonadictl
{{input|1=aa-complain mysqld}}
* "DB error: 'Could not open required defaults file: /home/$username/.local/share/akonadi/mysql.conf"


You can solve this by running '''aa-complain mysqld''' with root privileges then reload apparmor.
<!--T:113-->
On KUbuntu this is:  
On ''Kubuntu'' this is:  
   
   
sudo aa-complain mysqld
{{input|1=sudo aa-complain mysqld
sudo /etc/init.d/apparmor reload
sudo /etc/init.d/apparmor reload}}


Note that you might be using Apparmor even if it does not show up in the process list.
<!--T:52-->
Note that you might be using '''Apparmor''' even if it does not show up in the process list.


Also note that some distributions ship an additional ''mysqld'' binary called ''mysqld-akonadi'' which has AppArmor set up correctly. If that's the case on your system and you see this problem nevertheless, there are two possible reasons:
<!--T:53-->
* Akonadi still uses ''mysqld'' instead of ''mysqld-akonadi''. You can change that in Systemsettings -> Advanced -> Akonadi -> Server configuration.
Also note that some distributions ship an additional '''mysqld''' binary called '''mysqld-akonadi''' which has '''AppArmor''' set up correctly. If that's the case on your system and you see this problem nevertheless, there are two possible reasons:
* AppArmor is not setup correctly for ''mysqld-akonadi'' either. Try running the ''aa-complain'' command noted above with ''mysqld-akonadi'' instead of ''mysqld''.
* '''Akonadi''' still uses '''mysqld''' instead of '''mysqld-akonadi'''. You can change that in <menuchoice>Systemsettings -> Advanced -> Akonadi -> Server configuration</menuchoice>.
* '''AppArmor''' is not setup correctly for '''mysqld-akonadi''' either. Try running the "aa-complain" command noted above with '''mysqld-akonadi''' instead of '''mysqld'''.


<!--T:54-->
---
---


You will also experience this problem if you are running an encrypted home directory using encryptfs combined with AppArmor as the Akonadi apparmor profile currently does not account for an ecrypted home (common with Ubuntu Jaunty users).  Error messages with include:
<!--T:55-->
You will also experience this problem if you are running an encrypted home directory using encryptfs combined with '''AppArmor''' as the '''Akonadi apparmor''' profile currently does not account for an ecrypted home (common with ''Ubuntu Jaunty'' users).  Error messages with include:
* dmesg produces:  
* dmesg produces:  
      ecryptfs_do_create: Failure to create dentry in lower fs; rc = [-13]
{{output|1=ecryptfs_do_create: Failure to create dentry in lower fs; rc = [-13]
      ecryptfs_create: Failed to create file inlower filesystem
ecryptfs_create: Failed to create file inlower filesystem}}
* Akonadi will list the following errors:
* <!--T:114-->
      Akonadi server process not registered at D-Bus
Akonadi will list the following errors:  
{{output|1=Akonadi server process not registered at D-Bus}}


<!--T:56-->
The fix is to edit the following file "/etc/apparmor.d/usr.sbin.mysqld-akonadi".
The fix is to edit the following file "/etc/apparmor.d/usr.sbin.mysqld-akonadi".
Below the line:  
Below the line:  
      @{HOME}/.local/share/akonadi/** rwk,
{{output|1=@{HOME}/.local/share/akonadi/** rwk,}}
Add a new line:
<!--T:115-->
      @{HOME}/.Private/** rwk,
Add a new line:  
{{input|1=@{HOME}/.Private/** rwk,}}


Restart apparmor and restart akonadi.
<!--T:57-->
Restart '''apparmor''' and restart '''akonadi'''.


=== Missing Prerequisite === <!--T:58-->


=== Missing Prerequisite ===
<!--T:59-->
To use Akonadi you need to have the following packages installed (names might differ depending on your distribution):
To use '''Akonadi''' you need to have the following packages installed (names might differ depending on your distribution):


* The MySQL server (called ''mysql'' on openSUSE)
<!--T:60-->
* The Qt4 MySQL plugin (called ''libqt4-sql-mysql'' on openSUSE)
* The ''MySQL server'' (called '''mysql''' on '''openSUSE''')
* The ''Qt4 MySQL plugin'' (called ''libqt4-sql-mysql'' on ''openSUSE'')


If you compile Qt4 yourself, make sure to tell the ''configure'' script to build in MySQL support by passing it the '-plugin-sql-mysql' option. If ''configure'' cannot locate the necessary MySQL client code (i.e, says "MySQL support cannot be enabled due to functionality tests") then ensure that the corresponding package is installed (typically called ''[lib]mysql[client]-dev[el]''). Also, depending on the install location of the MySQL headers, additional parameters to ''configure'' might be needed (eg. ''-I /usr/include/mysql'' on OpenSuse).
<!--T:61-->
If you compile Qt4 yourself, make sure to tell the configure script to build in MySQL support by passing it the following option:
{{input|1=-plugin-sql-mysql}}
  <!--T:116-->
If "configure" cannot locate the necessary MySQL client code (i.e, says "MySQL support cannot be enabled due to functionality tests") then ensure that the corresponding package is installed (typically called ''[lib]mysql[client]-dev[el]''). Also, depending on the install location of the MySQL headers, additional parameters to "configure" might be needed (eg. "-I /usr/include/mysql" on ''OpenSuse'').


If you get the Qt4 direct from Nokia, such as a download of  
<!--T:62-->
  qt-sdk-linux-x86_64-opensource-2009.05.bin
If you get the Qt4 direct from ''Nokia'', such as a download of <code>qt-sdk-linux-x86_64-opensource-2009.05.bin</code>, you will ( by the command "akonadictl start") get an error at Test 1:


you will ( by the command "akonadictl start") get an error at Test 1:
<!--T:99-->
  ''Database driver not found.''
{{output|1=Database driver not found.
  ''Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration.''
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration.
  ''The following drivers are installed: QSQLITE.''
The following drivers are installed: QSQLITE.
  ''Make sure the required driver is installed.''
Make sure the required driver is installed.}}


<!--T:64-->
The driver you need is ''libqsqlmysql.so''
The driver you need is ''libqsqlmysql.so''


<!--T:65-->
Unfortunately this driver is not part of the distribution (until january 2010).
Unfortunately this driver is not part of the distribution (until january 2010).
You need to compile the source. Download it
You need to compile the source. Download the following file:
  qt-everywhere-opensource-src-4.6.0.tar.bz
{{input|1=qt-everywhere-opensource-src-4.6.0.tar.bz}}
 
<!--T:66-->
Then ''configure'' and ''make'' as above. But the ''make install'' doesn't copy the driver. So you have to copy it by yourself:
{{input|1=cp <qt-src-dir>/qt-everywhere-opensource-src-4.6.0/plugins/sqldrivers/libqsqlmysql.so /usr/local/bin/sqldrivers/}}
<!--T:117-->
'''But''' the Revision '''4.6.1''', such as qt-sdk-linux-x86_64-opensource-2010.xx.bin has the driver you needed.
'''But''' it might be necessary to bind again the ''libqsqlmysql.so'' if the ''libmysqlclient.so'' has changed to a newer version.


''configure'' and ''make'' as above. But the ''make install'' doesn't copy the driver. So you have to copy it by yourself:
=== Environment Setup === <!--T:67-->
  ''cp <qt-src-dir>/qt-everywhere-opensource-src-4.6.0/plugins/sqldrivers/libqsqlmysql.so /usr/local/bin/sqldrivers/ ''


'''But''' the Revision '''4.6.1''', such as qt-sdk-linux-x86_64-opensource-2010.xx.bin
<!--T:68-->
has the driver you needed.
The '''Akonadi''' server searches for '''Akonadi''' agents and resources in the paths defined in the ''XDG_DATA_DIRS'' environment variable. If '''Akonadi''' complains about not finding agents or resources, check if this variable is set correctly. Also keep in mind that even if set in a current console session, it might not have been set when starting the server. Starting the server manually in the current console session excludes this cause.  


=== Environment Setup ===
=== mysqld: unknown variable 'innodb_file_per_table=1' === <!--T:69-->
The Akonadi server searches for Akonadi agents and resources in the paths defined in the '''XDG_DATA_DIRS''' environment variable. If Akonadi complains about not finding agents or resources, check if this variable is set correctly. Also keep in mind that even if set in a current console session, it might not have been set when starting the server. Starting the server manually in the current console session excludes this cause.


=== mysqld: unknown variable 'innodb_file_per_table=1' ===
<!--T:70-->
If the MySQL server log contains the following error, then your MySQL server was built without the InnoDB support which is required by '''Akonadi''' or '''InnoDB''' needs to be loaded in your ''mysql.conf'' file:
{{output|1=[ERROR] /usr/libexec/mysqld: unknown variable 'innodb_file_per_table=1'
[ERROR] Aborting}}


If the MySQL server log contains the following error:
<!--T:71-->
<code>
Try adding:  
[ERROR] /usr/libexec/mysqld: unknown variable 'innodb_file_per_table=1'
[ERROR] Aborting</code>


then your MySQL server was built without the InnoDB support which is required by Akonadi.
<!--T:100-->
{{input|1=#sql_mode=strict_trans_tables <- Add underneath this line
#plugins
plugin_dir=usr/lib/mysql/plugin < - This may be a different path
plugin-load=ha_innodb.so}}
===Table 'mysql. servers' doesn't exist=== <!--T:101-->


<!--T:73-->
If MySQL server log contains the following error, then, most probably, you don't have your MySQL configuration file in place:


===Table 'mysql. servers' doesn't exist===
<!--T:102-->
If MySQL server log contains the following error:
{{output|1=[ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
<code>[ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
[ERROR] Cannot open mysql.db
[ERROR] Cannot open mysql.db
[ERROR] Cannot open mysql.user
[ERROR] Cannot open mysql.user
[ERROR] Cannot open mysql.event</code>
[ERROR] Cannot open mysql.event}}
then, most probably, you don't have your MySQL configuration file in place. Copy it from ''/usr/share/config/akonadi/mysql-global.conf'' into ''~/.config/akonadi/mysql-local.conf''. (For debian and openSuSE users the file ist located in ''/etc/akonadi/mysql-global.conf''). Then open it and uncomment the line '''sql_mode=strict_trans_tables'''. If, after that, you get the following errors:
 
<code>[ERROR] Plugin 'InnoDB' init function returned error.
<!--T:103-->
[ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE  
Copy it from ''/usr/share/config/akonadi/mysql-global.conf'' into ''~/.config/akonadi/mysql-local.conf''. (For ''debian'' and ''openSuSE'' users the file is located in ''/etc/akonadi/mysql-global.conf''). Then open it and uncomment the line '''sql_mode=strict_trans_tables'''. After that, you may get the following errors:  
failed.
 
<!--T:104-->
{{output|1=[ERROR] Plugin 'InnoDB' init function returned error.
[ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
[ERROR] Unknown/unsupported table type: innodb
[ERROR] Unknown/unsupported table type: innodb
[ERROR] Aborting</code>
[ERROR] Aborting}}
then in the same file find the line that starts just like the one above (which you have uncommented), but has additional parameters, separated by commas (something like '''sql_mode=strict_trans_tables,strict_all_tables, ...etc'''). Comment the shorter ''sql_mode=...'' line and uncomment the longer one.


On openSUSE 11.2 running the command
<!--T:105-->
<code>mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/</code>
If so, then in the same file find the line that starts just like the one above (which you have uncommented), but has additional parameters, separated by commas (something like '''sql_mode=strict_trans_tables,strict_all_tables, ...etc'''). Comment the shorter ''sql_mode=...'' line and uncomment the longer one.
will fix this problem.


=== Can't initialize character set latin1 ===
<!--T:74-->
If you get the following error when starting Akonadi:
On ''openSUSE 11.2'' running the following command will fix this problem:  


<code>Character set 'latin1' is not a compiled character set and is not specified in
      <!--T:106-->
the '/usr/share/mysql/charsets/Index.xml' file
{{input|1=mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/}}
 
<!--T:121-->
For ''Archlinux'':
 
<!--T:122-->
{{input|1=mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/ --basedir=/usr}}
 
=== Kubuntu 10.04 (Lucid Lynx) Upgrade === <!--T:75-->
 
<!--T:76-->
This is a summary of other entries here for those upgrading from ''Kubuntu 9.10'' to 10.04 who may have been using a personal package archive (PPA) for KDE 4.3 for bug fixes.
 
<!--T:77-->
Install missing prerequisites.  Remove previous '''akonadi''' cache.  Start the '''akonadi''' service.  Install the database.  Upgrade the database.  Stop and restart the '''akonadi''' service.
{{input|1=sudo apt-get install virtuoso-server mysql-server-5.1
rm -r $HOME/.local/share/akonadi
akonadictl start
mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/
mysql_upgrade --socket=$HOME/.local/share/akonadi/db_misc/mysql.socket
akonadictl stop
akonadictl start}}
 
<!--T:78-->
The mysql_install_db command above will report something like the following, which you can safely ignore:
 
<!--T:108-->
{{output|1=Installing MySQL system tables...
100501 18:04:30 [Warning] Can't create test file
/home/[userid]/.local/share/akonadi/db_data/[hostname].lower-test}}
 
<!--T:79-->
Reference:
[http://forum.kde.org/viewtopic.php?f=20&t=79717 forum.kde.org Akonadi 1.2.1 - some issues]
 
=== KAddressBook upgrade === <!--T:80-->
 
<!--T:81-->
In addition to the ''Kubuntu 10.04'' remedy above, problems trying to add a ''Vcard directory'' may require the following command while '''Akonadi''' is not running:
{{input|1=rm -rf $HOME/.config/akonadi}}
 
=== Can't initialize character set latin1 === <!--T:82-->
 
<!--T:83-->
If you get the following error when starting Akonadi, then you are probably using a MySQL server which has a version > 5.1.42:
 
<!--T:84-->
{{output|1=Character set 'latin1' is not a compiled character set and is not specified in the '/usr/share/mysql/charsets/Index.xml' file
Nepomuk QueryServer interface not available!
Nepomuk QueryServer interface not available!
Connecting to deprecated signal
Connecting to deprecated signal
Line 221: Line 391:
Last driver error: "QMYSQL: Unable to connect"
Last driver error: "QMYSQL: Unable to connect"
Last database error: "Can't initialize character set latin1 (path:
Last database error: "Can't initialize character set latin1 (path:
/usr/share/mysql/charsets/)"</code>
/usr/share/mysql/charsets/)"}}


then you're probably using a MySQL server which has a version > 5.1.42.
<!--T:85-->
There is a known regression in MySQL 5.1.43 and 5.1.44 which prevents MySQL from starting.  
There is a known regression in MySQL 5.1.43 and 5.1.44 which prevents MySQL from starting.  


<!--T:86-->
See [http://bugs.kde.org/226960 the bug report] for more details.
See [http://bugs.kde.org/226960 the bug report] for more details.




=== Restarting after a previous error ===
=== Restarting after a previous error === <!--T:87-->
If you had problems starting Akonadi and fixed those (such as a missing package or the Apparmor problem) make sure that the Akonadi server is completely shut down before trying to start it again, by calling '''akonadictl stop''' on the command line. You can confirm that it was indeed shut down completely by running '''akonadictl status'''.
 
<!--T:88-->
If you had problems starting '''Akonadi''' and fixed those (such as a missing package or the '''Apparmor''' problem) make sure that the '''Akonadi''' server is completely shut down before trying to start it again, by calling on the command line:
{{input|1=akonadictl stop}}
<!--T:118-->
You can confirm that it was indeed shut down completely by running:
{{input|1=akonadictl status}}
 
<!--T:89-->
Under some circumstances the '''Akonadi''' server can be stuck in a partially running state after a failure which will prevent the next attempt to start it to fail as well. Please file a bug report if you run into this problem including the self-test report of the initial problem.


Under some circumstances the Akonadi server can be stuck in a partially running state after a failure which will prevent the next attempt to start it to fail as well. Please file a bug report if you run into this problem including the self-test report of the initial problem.
=== The so-called "Gentoo-Assert" === <!--T:90-->


=== The so-called "Gentoo-Assert" ===
<!--T:91-->
That's an especially nasty problem that so far only affects users of source-based distributions, most prominently Gentoo. It is named after MySQL assertions like the following example and is most likely caused by a MySQL protocol mismatch between the MySQL server and the client library or the Qt MySQL driver.
That's an especially nasty problem that so far only affects users of source-based distributions, most prominently ''Gentoo''. It is named after MySQL assertions like the following example and is most likely caused by a MySQL protocol mismatch between the MySQL server and the client library or the Qt MySQL driver.  


<code>
<!--T:92-->
akonadiserver: libmysql.c:4301: setup_one_fetch_function: Assertion `param->buffer_length != 0' failed.
{{output|1=akonadiserver: libmysql.c:4301: setup_one_fetch_function: Assertion
</code>
`param->buffer_length != 0' failed.}}


It is extremely hard to diagnose as the assertion mentioned above are only triggered sometimes. Instead you'll get a wide range of weird symptoms:
<!--T:93-->
* ASAP protocol logs show successful creation of objects which are supposedly no longer available when the next commands accesses them again.
It is extremely hard to diagnose as the assertion mentioned above is only triggered sometimes. Instead you'll get a wide range of weird symptoms:
* ASAP protocol logs show successful creation of objects which are supposedly no longer available when the next commands access them again.
* SQL protocol logs show INSERT or UPDATE commands with values that mismatch the corresponding column types and nevertheless succeed.
* SQL protocol logs show INSERT or UPDATE commands with values that mismatch the corresponding column types and nevertheless succeed.
* SQL protocol logs showing large apparently random record ids which are nevertheless considered valid.
* SQL protocol logs showing large apparently random record ids which are nevertheless considered valid.


<!--T:94-->
References:
References:
* http://forum.kde.org/viewtopic.php?f=20&t=61738
* http://forum.kde.org/viewtopic.php?f=20&t=61738
Line 252: Line 434:
* http://bbs.archlinux.org/viewtopic.php?id=78358
* http://bbs.archlinux.org/viewtopic.php?id=78358


<!--T:95-->
Possible solution: Rebuild the Qt MySQL driver after upgrading MySQL (which most likely caused this problem in the first place).
Possible solution: Rebuild the Qt MySQL driver after upgrading MySQL (which most likely caused this problem in the first place).


=== To reset nepomuk and the akonadi system in KMail 2 === <!--T:96-->
<!--T:124-->
Be warned that you should not follow this advice, without backing up your data.
<!--T:125-->
After the introduction  of KMail 2 in kdepim, since KDE SC 4.6.x, in order to search in emails and to get addressbooks, it is necessary to set <menuchoice>System Settings -> Desktop Search -> Enable Nepomuk Sematic Desktop </menuchoice> enabled, and check the box <menuchoice>Enable Email Indexer</menuchoice>.
<!--T:126-->
If virtuoso-t occupies almost 100% of CPU cores and the system is nearly frozen, it may be a good idea to reset all.
<!--T:127-->
To do the big reset you need :
{{Warning|1=This will initialize all your Kontact and KDE PIM data customization, but not remove emails data, akonadi resources (like email accounts, address books ), KMail Identities, filters and expired mail folders.  However, be warned that you will lost much customization information, including ratings and other metadata.  Also there is some risk here, because this reconstruction of data has bugs that may make you lose data.}}
<!--T:133-->
{{Input|1=akonadictl stop
rm -rf  ~/.local/share/akonadi/db_data/*
akonadictl start
# we should also clean KDE temporary folders before start KMail
rm -rf /var/tmp/kdecache-$USER /tmp/ksocket-$USER /tmp/kde-$USER
}}
<!--T:128-->
You need to check <menuchoice> Settings -> Configure KMail -> Identities</menuchoice> to see whether the Sent folder is correct.  Some of mine were not.
<!--T:129-->
Check <menuchoice> Settings -> Configure KMail -> Accounts </menuchoice> settings and check whether the incoming folder is correct.  Some of mine were not.
<!--T:130-->
Check all filters, before pulling some email.  I advise disabling all filters because there may be many folders incorrect or missing.
<!--T:131-->
Also important is that if you have an "expired folder", check all folders to see if the receiving folder is correctly set.  If you have <menuchoice>Delete permanently</menuchoice> checked you may lose important emails because expiring worked with the wrong folder.
<!--T:132-->
In each <menuchoice> folder's context menu -> Folder Properties </menuchoice> check Identities, as the associated identity may also be changed or lost in any folder. 
<!--T:134-->
After this we are ready to [[Special:myLanguage/Akonadi_4.4/Troubleshooting#You experience long delays when sending mail|clean up Nepomuk data]] before enabling Nepomuk Semantic.
<!--T:135-->
After all is cleaned , if you aren't able to read any emails, you should logout and login KDE session again to reinitialize all processes .
<!--T:98-->
[[Category:System]]
[[Category:System]]

Latest revision as of 17:00, 13 February 2013


Introduction

This page is mainly concerned with troubleshooting Akonadi, as there are inevitable glitches in early stages of migration. For many people the first signs of Akonadi activity will be in KDE SC 4.4, and many will be confused by it. For a brief description of the purpose of Akonadi, see this Glossary entry. You will also find useful links to further reading. Once the inevitable teething troubles are over, Akonadi will provide a power-house usable by many applications.

Understanding the Structure

You can, of course, simply use Kontact to manage all your addressbooks, but if you have a backup system in place, for instance, you'll want to know where your data is, and how it's handled. The page Akonadi and AddressBook will help.

Troubleshooting Tips

  • When reporting problems with the Akonadi server, always include the comprehensive self-test report. This report can be obtained from the self-test dialog which shows up whenever the Akonadi server was unable to start successfully. You can find the selftest dialog in the kcmmodule that is accessable via:
kcmshell4 kcm_akonadi
  • Starting the Akonadi server manually on the command line can result in additional useful information. This can be done by running the following command on a console:
akonadictl start

Similarly, with this command the Akonadi server can be stopped again:

akonadictl stop

This command gives more useful information:

akonadictl status

Common Problems

Kontact doesn't start - and doesn't tell me anything

If Kontact doesn't start, and you see no error messages, check that Akonadi is running. Akonadi should start on demand. If yours doesn't, you will have to start it before Kontact will start up if you have any migrated resources (most likely KAddressBook). Use the Akonadi Tray icon (get this by typing "akonadi" into KRunner) or type the commands into konsole to start it.

Kontact doesn't start - version II

Kontact has been known to be hit after an update. If this happens, try starting KMail, KOrganizer or any of the other applications from KRunner (or Konsole). Chances are high that they will work as stand-alone apps while you find what went wrong. This mainly affects version 4.4.0.

Folder not found: "/Local"

Some people have reported this error, when Kontact would not start. In some early versions of 4.4 there seems to be a bug in the migration that is telling KMail to look for local mail in ~/.local/share/Local, a directory that had not been set up. The solution for this is not to attempt to correct it, but, with KMail/Kontact closed, to open the Akonadi Console:

  • Use krunner, Alt-F2, or
  • "akonadiconsole" konsole

Then remove the resource that it says is for local mail. You should now find that you can start Kontact or KMail, and that a new resource will be created, pointing to ~/.local/share/local-mail

There are other new folders under ~/.local/share/

Yes. If your addressbook has migrated correctly a new resource will have been created as ~/.local/share/contacts/

What are /usr/bin/akonadi_maildir_resource and /usr/bin/akonadi_maildispatcher_agent?

The akonadi_maildir_resource is created automatically by the akonadi_maildispatcher_agent, while the latter is always started together with the Akonadi server as it provides basic functionality (e.g. sending mail) that is used by all mail applications that are (and will be) based on Akonadi. So it is ok that these two are running, as a user you can simply ignore them. This autogenerated akonadi_maildir_resource will always point to ~/.local/share/local-mail/ which is your "Local folders" account where your local folders and emails will be stored.

At this point, in KDE SC 4.4, mail is not yet being migrated.

Nepomuk Indexing Agents have been Disabled

Kontact is now working, but you keep seeing this notice:

The most common reason for this notice is that Nepomuk is simply disabled in System Settings. Please try enabling it in System Settings under Advanced -> Desktop Search -> Basic Settings by checking "Nepomuk Semantik Desktop" and clicking "Apply".

If this does not help (or if the option was already checked when you got the error) and if you have previously been using prereleases of KDE SC 4.4, you may be affected by a change to the database layout (due to an upgrade of the Virtuoso database server from version 5 to version 6; production releases of KDE SC 4.4 are expected to be shipped with Virtuoso version 6). The following commands should get it working again:

qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
rm -r ~/.kde/share/apps/nepomuk
rm -r ~/.kde4/share/apps/nepomuk
nepomukserver

Note that the above commands will not enable Nepomuk permanently if it isn't already enabled, you have to use System Settings for that.

A running Nepomuk is necessary to have a working Akonadi, and thus a working Kontact. However, you can disable the Strigi file indexer, which is not needed for Kontact. Strigi file indexing is used for desktop searching only, which is unrelated to Kontact. Just make sure Nepomuk itself is running correctly for Kontact.

In Kontact, Nepomuk is used for many different things, ranging from displaying upcoming birthdays, over handling free/busy lists to showing a contact photo in the message viewer. If Nepomuk is not running, several different things in Kontact will cease to work. The notice is there to warn you about the reduced functionality. Enabling Nepomuk as described above fixes the problem.

You can check if Nepomuk is correctly running by typing:

akonadictl status

I want to use my current Address Book and Organizer - Can I?

Yes. When you use the Akonadi Console to add a resource it allows you to choose as Standard Addressbook - point that to your std.vcf should work fine. Migration does not destroy your old addressbook. You can continue to use it, though you will lose any benefits that Akonadi can bring. Alternatively you can have both an Akonadi addressbook and your original one, for a time, if you feel safer that way.

I can't see any details in my Address Book

At the moment, the cause of this is not identified, but the cure is simple. Close Kontact, and start KAddressBook as a stand-alone application. After you close it you will be able to use it within Kontact. It seems that something is not being triggered when Kontact launches, and I expect this to be identified and fixed soon. This seems to mainly affect version 4.4.0.

My contacts don't show when I use the Select button in KMail

Check System Settings -> Advanced tab -> KDE Resources. Make sure that your Akonadi controlled address book(s) are listed there - add them if necessary. At the same time, it's a good idea to make your main Akonadi addressbook, usually called "Personal Contacts", is set to be the default. More details of how this can be found in here.

How do I get my Groupware addressbook back?

Two solutions: using the old framework or the new one.

Old framework: In akonadiconsole, add a "KDE Address Book (traditional)". The KDE Address Book means you can set up old kresources for Akonadi. In the configuration of "KDE Address Book (traditional)", you point it to an "IMAP over KMail" KResource and in KMail, the groupware options should be enabled. This should work for Kolab, eGroupware and similar addressbooks - you will need to check the options to make sure that the correct type is selected.

New framework (only tested with Kolab): In the Akonadi configuration module add an "IMAP E-Mail Server" resource, and set up your mail server name, username and password, then click Auto-Detect. Run this command to see it:

kcmshell4 kcm_akonadi

Then add a Kolab resource. The next step is to wait for the imap resource to synchronize, which can take quite a long time. The status will appear in the Akonadi configuration module. If nothing happens, try restarting akonadiserver. After some time the Kolab addressbook(s) should appear in KAddressBook.

 

You experience long delays when sending mail

This is accompanied by KMail freezing until the mail is actually dispatched.

A bug has been found in the way Nepomuk checks addresses, which can cause huge delays. This is fixed for SC 4.4.1. If you cannot get 4.4.1 yet, there is this work-around:

Close Kontact, or KMail and KAddressbook if you are running stand-alone apps. Disable Strigi in SystemSettings. Stop Nepomuk, delete the database and restart nepomukserver. The actual commands you need are (as user):

qdbus org.kde.NepomukServer /nepomukserver org.kde.NepomukServer.quit
rm -r ~/.kde/share/apps/nepomuk
rm -r ~/.kde4/share/apps/nepomuk
nepomukserver

This will, of course, wipe out all the database, including any tags you've added. In theory, I understand that it's possible to do a more selective wipe of the database. If this matters to you you can find the instructions at this page

IMAP Resource always claims to be offline

Even though the system has an internet connection, the IMAP resource refuses to switch to online state.

This bug is caused by a misconfigured NetworkManager installation on your system. Check the output of the following command:

qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.NetworkManager.state

You can get any of the following values:

  • 20 (formerly 4), disconnected. If you have access to the internet, your NetworkManager configuration must be wrong.
  • 70 (formerly 3), connected. The problem must be somewhere else.
    • It might be that one or more network interfaces are not controlled by NetworkManager. If that is your case, give the control of those interfaces to NetworkManager. It might be as simple as removing the entries for the interfaces from a text file (for example, /etc/network/interfaces). Check the help resources provided by your software distribution for more information.

Can't read any details of some messages or big delays to read it

if you aren't able to read some emails and see a message with " please wait ... ", you may logout and login KDE session to reinitialize all processes, might help.

Some Technical Issues

Nepomuk

Starting with KDE 4.4, it is required that Nepomuk is running in order for Akonadi to work correctly. Akonadi will check this and display an error dialog on startup if this is not the case.

Nepomuk only works with the Virtuoso backend. You can check whether the Nepomuk is running with the correct backend by using the Akonadi self-test dialog, as described above.

Although Nepomuk is required to be running, you can still disable Strigi file indexing, which is usually the most resource-intensive part of the Nepomuk framework.

Apparmor

Some distributions using Apparmor have it set up in a way that prevents Akonadi from running its internal database server. This can result in a variety of fuzzy error messages, including but not limited to the following:

unknown error 255 when running akonadictl
"DB error: 'Could not open required defaults file: /home/$username/.local/share/akonadi/mysql.conf"

You can solve this by running the following command with root privileges then reload apparmor:

aa-complain mysqld

On Kubuntu this is:

sudo aa-complain mysqld
sudo /etc/init.d/apparmor reload

Note that you might be using Apparmor even if it does not show up in the process list.

Also note that some distributions ship an additional mysqld binary called mysqld-akonadi which has AppArmor set up correctly. If that's the case on your system and you see this problem nevertheless, there are two possible reasons:

  • Akonadi still uses mysqld instead of mysqld-akonadi. You can change that in Systemsettings -> Advanced -> Akonadi -> Server configuration.
  • AppArmor is not setup correctly for mysqld-akonadi either. Try running the "aa-complain" command noted above with mysqld-akonadi instead of mysqld.

---

You will also experience this problem if you are running an encrypted home directory using encryptfs combined with AppArmor as the Akonadi apparmor profile currently does not account for an ecrypted home (common with Ubuntu Jaunty users). Error messages with include:

  • dmesg produces:
ecryptfs_do_create: Failure to create dentry in lower fs; rc = [-13]
ecryptfs_create: Failed to create file inlower filesystem

Akonadi will list the following errors:

Akonadi server process not registered at D-Bus

The fix is to edit the following file "/etc/apparmor.d/usr.sbin.mysqld-akonadi". Below the line:

@{HOME}/.local/share/akonadi/** rwk,

Add a new line:

@{HOME}/.Private/** rwk,

Restart apparmor and restart akonadi.

Missing Prerequisite

To use Akonadi you need to have the following packages installed (names might differ depending on your distribution):

  • The MySQL server (called mysql on openSUSE)
  • The Qt4 MySQL plugin (called libqt4-sql-mysql on openSUSE)

If you compile Qt4 yourself, make sure to tell the configure script to build in MySQL support by passing it the following option:

-plugin-sql-mysql

If "configure" cannot locate the necessary MySQL client code (i.e, says "MySQL support cannot be enabled due to functionality tests") then ensure that the corresponding package is installed (typically called [lib]mysql[client]-dev[el]). Also, depending on the install location of the MySQL headers, additional parameters to "configure" might be needed (eg. "-I /usr/include/mysql" on OpenSuse).

If you get the Qt4 direct from Nokia, such as a download of qt-sdk-linux-x86_64-opensource-2009.05.bin, you will ( by the command "akonadictl start") get an error at Test 1:

Database driver not found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration.
The following drivers are installed: QSQLITE.
Make sure the required driver is installed.

The driver you need is libqsqlmysql.so

Unfortunately this driver is not part of the distribution (until january 2010). You need to compile the source. Download the following file:

qt-everywhere-opensource-src-4.6.0.tar.bz

Then configure and make as above. But the make install doesn't copy the driver. So you have to copy it by yourself:

cp <qt-src-dir>/qt-everywhere-opensource-src-4.6.0/plugins/sqldrivers/libqsqlmysql.so /usr/local/bin/sqldrivers/

But the Revision 4.6.1, such as qt-sdk-linux-x86_64-opensource-2010.xx.bin has the driver you needed. But it might be necessary to bind again the libqsqlmysql.so if the libmysqlclient.so has changed to a newer version.

Environment Setup

The Akonadi server searches for Akonadi agents and resources in the paths defined in the XDG_DATA_DIRS environment variable. If Akonadi complains about not finding agents or resources, check if this variable is set correctly. Also keep in mind that even if set in a current console session, it might not have been set when starting the server. Starting the server manually in the current console session excludes this cause.

mysqld: unknown variable 'innodb_file_per_table=1'

If the MySQL server log contains the following error, then your MySQL server was built without the InnoDB support which is required by Akonadi or InnoDB needs to be loaded in your mysql.conf file:

[ERROR] /usr/libexec/mysqld: unknown variable 'innodb_file_per_table=1'
[ERROR] Aborting

Try adding:

#sql_mode=strict_trans_tables <- Add underneath this line
#plugins
plugin_dir=usr/lib/mysql/plugin < - This may be a different path
plugin-load=ha_innodb.so

Table 'mysql. servers' doesn't exist

If MySQL server log contains the following error, then, most probably, you don't have your MySQL configuration file in place:

[ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
[ERROR] Cannot open mysql.db
[ERROR] Cannot open mysql.user
[ERROR] Cannot open mysql.event

Copy it from /usr/share/config/akonadi/mysql-global.conf into ~/.config/akonadi/mysql-local.conf. (For debian and openSuSE users the file is located in /etc/akonadi/mysql-global.conf). Then open it and uncomment the line sql_mode=strict_trans_tables. After that, you may get the following errors:

[ERROR] Plugin 'InnoDB' init function returned error.
[ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
[ERROR] Unknown/unsupported table type: innodb
[ERROR] Aborting

If so, then in the same file find the line that starts just like the one above (which you have uncommented), but has additional parameters, separated by commas (something like sql_mode=strict_trans_tables,strict_all_tables, ...etc). Comment the shorter sql_mode=... line and uncomment the longer one.

On openSUSE 11.2 running the following command will fix this problem:

mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/


For Archlinux:

mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/ --basedir=/usr

Kubuntu 10.04 (Lucid Lynx) Upgrade

This is a summary of other entries here for those upgrading from Kubuntu 9.10 to 10.04 who may have been using a personal package archive (PPA) for KDE 4.3 for bug fixes.

Install missing prerequisites. Remove previous akonadi cache. Start the akonadi service. Install the database. Upgrade the database. Stop and restart the akonadi service.

sudo apt-get install virtuoso-server mysql-server-5.1
rm -r $HOME/.local/share/akonadi
akonadictl start
mysql_install_db --datadir=$HOME/.local/share/akonadi/db_data/
mysql_upgrade --socket=$HOME/.local/share/akonadi/db_misc/mysql.socket
akonadictl stop
akonadictl start

The mysql_install_db command above will report something like the following, which you can safely ignore:

Installing MySQL system tables...
100501 18:04:30 [Warning] Can't create test file 
/home/[userid]/.local/share/akonadi/db_data/[hostname].lower-test

Reference: forum.kde.org Akonadi 1.2.1 - some issues

KAddressBook upgrade

In addition to the Kubuntu 10.04 remedy above, problems trying to add a Vcard directory may require the following command while Akonadi is not running:

rm -rf $HOME/.config/akonadi


Can't initialize character set latin1

If you get the following error when starting Akonadi, then you are probably using a MySQL server which has a version > 5.1.42:

Character set 'latin1' is not a compiled character set and is not specified in the '/usr/share/mysql/charsets/Index.xml' file
Nepomuk QueryServer interface not available!
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
DataStore::unhideAllPimItems()
Character set 'latin1' is not a compiled character set and is not specified in
the '/usr/share/mysql/charsets/Index.xml' file
Database error: Cannot open database.
Last driver error: "QMYSQL: Unable to connect"
Last database error: "Can't initialize character set latin1 (path:
/usr/share/mysql/charsets/)"
Database error: Cannot open database.
Last driver error: "QMYSQL: Unable to connect"
Last database error: "Can't initialize character set latin1 (path:
/usr/share/mysql/charsets/)"

There is a known regression in MySQL 5.1.43 and 5.1.44 which prevents MySQL from starting.

See the bug report for more details.


Restarting after a previous error

If you had problems starting Akonadi and fixed those (such as a missing package or the Apparmor problem) make sure that the Akonadi server is completely shut down before trying to start it again, by calling on the command line:

akonadictl stop

You can confirm that it was indeed shut down completely by running:

akonadictl status

Under some circumstances the Akonadi server can be stuck in a partially running state after a failure which will prevent the next attempt to start it to fail as well. Please file a bug report if you run into this problem including the self-test report of the initial problem.

The so-called "Gentoo-Assert"

That's an especially nasty problem that so far only affects users of source-based distributions, most prominently Gentoo. It is named after MySQL assertions like the following example and is most likely caused by a MySQL protocol mismatch between the MySQL server and the client library or the Qt MySQL driver.

akonadiserver: libmysql.c:4301: setup_one_fetch_function: Assertion
`param->buffer_length != 0' failed.

It is extremely hard to diagnose as the assertion mentioned above is only triggered sometimes. Instead you'll get a wide range of weird symptoms:

  • ASAP protocol logs show successful creation of objects which are supposedly no longer available when the next commands access them again.
  • SQL protocol logs show INSERT or UPDATE commands with values that mismatch the corresponding column types and nevertheless succeed.
  • SQL protocol logs showing large apparently random record ids which are nevertheless considered valid.

References:

Possible solution: Rebuild the Qt MySQL driver after upgrading MySQL (which most likely caused this problem in the first place).

To reset nepomuk and the akonadi system in KMail 2

Be warned that you should not follow this advice, without backing up your data.

After the introduction of KMail 2 in kdepim, since KDE SC 4.6.x, in order to search in emails and to get addressbooks, it is necessary to set System Settings -> Desktop Search -> Enable Nepomuk Sematic Desktop enabled, and check the box Enable Email Indexer.

If virtuoso-t occupies almost 100% of CPU cores and the system is nearly frozen, it may be a good idea to reset all.

To do the big reset you need :

Warning

This will initialize all your Kontact and KDE PIM data customization, but not remove emails data, akonadi resources (like email accounts, address books ), KMail Identities, filters and expired mail folders. However, be warned that you will lost much customization information, including ratings and other metadata. Also there is some risk here, because this reconstruction of data has bugs that may make you lose data.


akonadictl stop
rm -rf  ~/.local/share/akonadi/db_data/* 
akonadictl start 
# we should also clean KDE temporary folders before start KMail
rm -rf /var/tmp/kdecache-$USER /tmp/ksocket-$USER /tmp/kde-$USER

You need to check Settings -> Configure KMail -> Identities to see whether the Sent folder is correct. Some of mine were not.

Check Settings -> Configure KMail -> Accounts settings and check whether the incoming folder is correct. Some of mine were not.

Check all filters, before pulling some email. I advise disabling all filters because there may be many folders incorrect or missing.

Also important is that if you have an "expired folder", check all folders to see if the receiving folder is correctly set. If you have Delete permanently checked you may lose important emails because expiring worked with the wrong folder.

In each folder's context menu -> Folder Properties check Identities, as the associated identity may also be changed or lost in any folder.

After this we are ready to clean up Nepomuk data before enabling Nepomuk Semantic.

After all is cleaned , if you aren't able to read any emails, you should logout and login KDE session again to reinitialize all processes .