Kmail/Folder Properties/da

Under Construction

This is a new page, currently under construction!

Mappeegenskaber

Mappeegenskaber i Kmails

Dialogen Egenskaber for mappen lader dig omdøbe din mappe og angive alle dens egenskaber. Bemærk, at de fleste egenskaber kun er tilgængelige for dine egne mapper og ikke for standardmapper som indbakke og lignende. Standardmapper kan ikke omdøbes

Generelt

Hvis du skal omdøbe en mappe, så ret teksten i feltet Navn:.
Handling ved ny/ulæst e-mail i denne mappe er aktiveret som standard for nye mapper. Det aktiverer bekendtgørelser når nye e-mails ankommer til mappen. Fjern fluebenet fra mapper som SPAM og affald, hvor du ikke ønsker bekendtgørelser.
Når du svarer på e-mails i denne mappe så aktivér Behold svar i denne mappe, hvis du ønsker at dine svar skal gemmes i samme mappe i stedet for i standardmappen til sendte e-mails.
Aktivér Skjul denne mappe i mappevalgsdialogen, hvis du ikke ønsker at denne mappe skal vises i mappevalgsdialoger som Gå til mappe og Flyt besked.
Som standard bruger nye mapper standardidentiteten. Deaktivér Brug standardidentitet og vælg en ny identitet fra listen Afsenderidentitet. Find mere information om identiteter på Konfiguration af identititeter. Svar på e-mails, som er blevet sendt direkte til dig vil stadig bruge e-mailens "Til"-adresse som standard, hvis der findes en tilsvarende identitet.
Hvis du har groupware kan du ændre indholdet, for eksempel mappens kalender og noter i drop-ned-listen Mappeindhold.
Hvis du deler mappen med andre brugere kan du aktivere Del ulæst-status med alle brugere, hvilket vil vise alle brugere den samme ulæst-status.

For example, a ticket system that all emails must be read and multiple users are responsible for reading unread tickets.

Vis

Tilvalget Brug selvvalgte ikoner lader dig erstatte standardikonerne i mappelisten.
Med drop-ned-menuen Vis kolonne kan du indstille den viste kolonne i headerpanelet til Standard, Modtager eller Afsender. Dette er nyttigt, hvis du bruger en mappe til at gemme dine egne sendte e-mails.
I afsnittet Brevoversigt kan du vælge og indstille en samling og et tema for demme mappe, som er forskelligt fra standardindstillingerne i KMails indstillinger. Der er mere information på siden om Udseende under Brevoversigt

The Use custom icons option lets you choose icons that are different from the default ones in the folder list.
With Show column drop down you can set the visible columns in the header pane to Default, Sender, or Receiver. This is useful if you use a folder to save your own sent messages.
In the Message List section you can select and configure an Aggregation and Theme for this folder different from the default configured in KMails settings. For more details see the Message List tab in the Appearance page.

Hentning

Hvis du har en konto, som ikke modtager så meget mail og du ikke ønsker, at KMail skal tjekke serveren så tit, så deaktivér Brug indstillinger fra overmappen eller kontoen for at angive et længere interval i feltet Synkronisér automatisk efter:.
I afsnittet Indstiling af hentning kan du ændre Hent altid hele breve til Hent brebkroppe efter behov hvis du har en langsom forbindelse. u kan indstille, hvor lang tid et brev vil blive beholdt lokalt i det efterfølgende felt.

If you have an account that does not receive much mail and you don't want KMail to query the server as often, you can uncheck Use options from parent folder or account to set a higher interval in Automatically synchronize after: spin box.
In Retrieval Options you can change Always retrieve full messages option to Retrieve message bodies on demand if you have a slow connection. You can set how long the message will remain locally in the following spin box.

Skabeloner

I dette faneblad kan du definere mappe-specifikke skabeloner for din tilpassede mapper. Se flere detaljer på siden om Brevskriveren under Standardskabeloner.

Udløbstid

Du kan indstille automatisk oprydning eller sletning af e-mails i dette faneblad. Sæt hak i feltet, hvis du ønsker at lade læste henholdsvis ulæste breve udløbe . Angiv, hvor mange dage brevene skal beholdes i feltet ved siden af. Hvis du ikke ønsker at slette brevene permanent kan du angive en mappe, de skal flyttes til i feltet Flyt udløbne breve til: eller du kan bruge mappevalgsdialogen. Når du har gennemset brevene og ønsker at slette dem permanent kan du gå til udløbstidsfanebladet i mappeindstillingerne for den mappe, du valgte at flytte dem til og vælge Slet udløbne breve permanent og så klikke på knappen Gem indstillinger og lad udløbe nu.

Advarsel

Breve, som bliver slettet under udløb af gamle breve kan ikke genskabes, så vær forsigtig med denne indstilling.

On this tab you can define folder-specific templates for your custom folders. For more details see the Standard Templates tab in the Composer page.

Expiry

You can set automatic cleanup or deletion of emails in this tab. Check the box if you would like to automatically expire read or unread messages respectively. Set the amount of days in the spinbox. If you do not want to permanently delete the messages you can assign a folder to move them to in Move expired messages to: textbox or folder selection dialog. Once you have reviewed the messages and want to permanently delete them, you can go to the folder expiry options of the folder you chose to move them to and set the option Delete expired messages permanently, then click the Save Settings and Expire Now button.

Warning

Messages that are deleted during expiration of old messages cannot be restored, so be careful with this setting.

Adgangskontrol

(Kun til IMAP)

Here you can manage the access control lists (ACLs) of IMAP folders.

Note

The IMAP server must have user level ACL configured and enabled for this tab to be visible.

The currently active ACL is shown in the list. It consists of pairs of User Ids and the Permissions granted to users identified by that User Id. [1] ACLs are settable per-folder.

Note

As with everything else when using disconnected IMAP, you need to sync with the server for the changes to be transferred to the server.

IMAP ACLs define a lot of fine-grained permissions that you can grant or deny other users. For the sake of clarity, KMail will present them as the following five categories that you can choose from (see Table 3.1, “ACL Rights Summary” for the details if you already know IMAP ACLs).

• None

Grants the users identified by User Id no rights at all. This is also the default for users not explicitly (or implicitly, as a group) listed in the ACL. These users will not see this folder in the list of IMAP folders presented to them by their mail clients.

• Read

Grants the users identified by User Id reading rights for this folder. This also includes the ability for their mail clients to mark mails as read and store this information on the server. [2] These users will see this folder in the list of IMAP folders presented to them by their mail clients. Use this to create a shared folder that others can read, but not modify.

If you were the editor of a company's news letter, you could create a folder for the purpose of distributing the news letter, grant everyone reading rights, and save the letter to this folder instead of sending it out by email to a catch-all address.

• Append (also known as Post)

Grants the users identified by User Id reading (see above) and posting rights for this folder. Use this to create a shared folder that others can read and post messages to, but cannot otherwise modify.

If you wanted to create a company-wide discussion forum, instead of using a web-based form or a separate company-private usenet server, you could create a bunch of folders (one per topic), and grant everyone reading and posting rights. Instead of posting to an NNTP server or writing their messages into a web form, people would just write emails and store them in the folder suiting the topic of the message.

• Write

Grants the users identified by User Id reading, posting (see above), and writing rights for this folder. The right to write to a folder includes deleting of messages, creating subfolders, and storing other attributes than read/unread on the server (e.g. answered).

Use this to create a shared folder that everyone has (almost, see All) the same rights for. In the Append example, you could assign write rights to a group of people acting as moderators, which would then be able to remove off-topic posts, and create sub-topic-folders for high-traffic folders.

• All

Grants the users identified by User Id reading, posting, writing (see above), as well as administration rights, i.e. the right to modify the ACL of this folder. This is the default set of rights for the owner of a folder. Table 3.1, “ACL Rights Summary” summarizes the IMAP ACL rights associated with each permission level.

Mailing List

If you are going to use the folder for a mailing list open the Mailinglist Folder Properties dialog with Folder → Mailing List Management from the menu. Then you should check Folder holds a mailing list to associate this folder with the mailing list. Next you should click on Detect Automatically. KMail will then try to guess some information about the mailing list from the currently selected message. If KMail could not determine some addresses then you can add the missing information manually. To do this first select the Address type for which you want to add an address. You can choose between:

• Post to List

This address is used for sending messages to the mailing list. This is usually an email address.

• Subscribe to List

This address is used for subscribing to the mailing list. This can be an email address or the address of a web page.

• Unsubscribe From List

This address is used for unsubscribing from the mailing list. This can be an email address or the address of a web page.

• List Archives

This is the address of the archive of the mailing list. This is usually the address of a web page.

• List Help

This address is used for requesting help for this mailing list. This is usually an email address. After selecting the appropriate Address type you enter the email address or the address of the web page and then click on Add. With Remove you can remove addresses. If all addresses have been added then you can execute an action, e.g. go to the list archives, by selecting the appropriate Address type and then clicking on Invoke Handler. If there is an email address and an address of a web page for the desired action then you will have to select the Preferred handler prior to clicking on Invoke Handler. Select KMail if you want to send a message to the email address and select Browser if you want to go to the web page. Alternatively to invoking the handler for Post to List you can send a new message to the mailing list via Message → New Message to Mailing-List...

Shortcut

You can define a keyboard shortcut to access the folder.

Maintenance

This tab shows an overview about the folder type and its size, the number of read and unread messages in the folder and allows you to enable text indexing.

[1] Note that a single User Id might refer to more than one user. Depending on the IMAP server and its configuration, there may be User Ids that correspond to groups of users, anonymous users, or any user. Consult the manual of your specific IMAP server implementation for more information.

[2] Every user has their own list of read mail, so none of your unread mails will suddenly be marked as read just because someone else has already read them.

[Table 3.1]

ACL Right	None	Read	Append	Write	All
Lookup		x	x	x	x
Read		x	x	x	x
Store Seen		x	x	x	x
Insert			x	x	x
Post			x	x	x
Write Flags				x	x
Create				x	x
Delete				x	x
Administer					x