Plasma/FAQ/4.4/Configuration/da

Skrivebord

Hvordan kan jeg flytte, dreje eller ændre størrelse af appletter på skrivebordet?

Hold markøren over appletten indtil applethåndtaget viser sig.

Nu kan du ændre størrelse på appletten og flytte og dreje den:

• For at flytte en applet: Klik på håndtaget og træk det rundt.
• For at dreje en applet: Træk i den buede pil
• For at ændre størrelse på en applet: Træk størrelsesknappen (over den buede pil). Du kan bevare applettens proportioner ved at holde Ctrl tasten nede samtidigt

Hvordan fjerner jeg et widget?

Et widget i panelet fjerner du ved at højreklikke på det og vælge Fjern dette.... Et widget på skrivebordet kan du fjerne på forskellige måder:

• Lad markøren svæve over det og klik på X i applethåndtaget som dukker op;
• Du kan bruge dialogen Tilføj widget, hvor du klikker på minus-symbolet ved siden af widgetnavnet

Hvordan kan jeg fastlåse widget'enes position?

• Metode 1: Højre-klik i et tomt område af skrivebordet og vælg Lås widgets fra kontekstmenuen. Fortryder du, så højre-klik igen og vælg Lås widgets op. Du har de samme valgmuligheder, hvis du højre-klikker på panelet.
• Metode 2: Vælg Lås Widgets i Plasma cashew'en i øverste, højre hjørne eller i panelindstillingerne.

Mine widgets bliver skjult under vinduerne, Hvordan kan jeg vise dem?

Du kan bringe alle widget'erne frem ved at taste Ctrl + F12</menuchoice>, hvilket flytter '''Plasmas Instrumentbræt''' foran. Når du er færdig kan du enten taste <keycap>Esc eller vælge Skjul Instrumentbræt fra cashew'en.

Hvordan skifter jeg mellem Kickoff og den gammeldags menu?

Højre-klik på menuikonen og vælg Skift til klassisk menustil (hvis du bruger Kickoff) eller Skift til Kickoff-menustil (hvis du bruger den klassiske menu). Du kan også tilføje en menu af en given type ved hjælp af dialogen Tilføj Widgets<menuchoice>. Det er måske også en god ide at se lidt på menuen [[Special:myLanguage/Lancelot|Lancelot]].

=== Kan Instrumentbrættet vise andre widgets end dem på mit skrivebord? ===

Ja, det kan det. Det kan du indstille i <menuchoice>Systemindstillinger -> Skrivebord -> Instrumentbræt -> Arbejdsområde ved at vælge Vis et uafhængigt sæt af widgets. Klik så på O.k., og du har et instrumentbræt, som er uafhængigt af dit skrivebord.

Notifikationer fylder for meget på skærmen - kan jeg blive fri for dem?

For de, der ikke bryder sig om det, er der en nem måde at slå dem fra. Højreklik på statusområdet i systembakken ("i" ikonet) og vælg Indstillinger af statusområde. Der har du mulighed for at slå statusmeddelelser fra applikationer eller jobs (så som filoverførsler) fra ved at fjerne hakket i det relevante felt. \

How do I switch my workspace to Plasma Netbook?

To enable the Netbook interface, go to System Settings -> Desktop -> workspace -> Form Factor -> Netbook.
Read more at the The Plasma Netbook Interface page

Working with Activities

How can I add/remove an activity?

• Adding an activity: Zoom out from your current desktop view by clicking on the desktop view cashew (the icon in the top right corner) and selecting Zoom out. You see a toolbar under your current desktop. Click on Add Activity to create a new desktop view.
• Removing an activity: Zoom out from your current desktop view and select the red cross from the toolbar that will appear to remove the activity.

{{Tip: You must Unlock Widgets (Ctrl + L) before you can remove any activities.}}

How can I quickly move between Activities?

The ZUI method is rather slow, so a better way is to use an Activity Bar. A short how-to here explains exactly what you need to do.

How can I use virtual desktops as activities ?

Open systemsettings > Desktop > Multiple Desktops, then check the box Different activity for each desktop. Click on OK<menuchoice> and you are done.

==Panel==

===How can I add applets to the panel?===

• ''Method 1'': Open the Add Widgets dialog in the Plasma cashew (upper right corner of the screen) then select the widget of your liking and ''drag it directly'' (don't double click or use the Add Widget button) to the panel.
• ''Method 2'': Drag an applet from the desktop to the panel.
• ''Method 3'': Click on the cashew on the panel, and select "Add widgets". Once you have selected the applet, it will be automatically added to the panel.

<span id="Can I move the applets on the panel?"></span>

===Can I move the applets on the panel?===

To do so, open up the panel controller (by clicking on the cashew or by right clicking on the panel and selecting <menuchoice>Panel Settings) and hover the mouse cursor over the applets. Its shape will turn into four arrows, and you'll be able to rearrange the applets as you wish by holding down the left mouse button to move the icon and clicking with the right mouse butten to fix the icon on its place.

How can I change the height and the size of the panel?

Click on the panel cashew (the small icon on the right side of the panel) to open the panel configuration interface. By clicking on Screen Edge, you can position the panel on any of the edges of the screen. Clicking on height and dragging increases or decreases the size of the panel.

The arrows on the sides of the panel define its size: there are two, which define "minimum" and "maximum" sizes. The maximum size is the size at which the panel can expand when items are added, while the minimum size is the minimum size the panel can have. If they are set differently, the panel will readjust its size depending on the contents.

Under More Options there are additional options to align the panel and configure its behavior.

Can I auto-hide the panel?

Open the panel controller, select More Options, then click on the relevant option.

How can I remove a panel?

Click on the panel toolbox, click on More settings, then select "Remove this Panel". Alternatively you can right click on the panel itself, select "Panel options" and choose "Remove this Panel".

General Panel Configuration Help

This forum page gives an illustrated guide to configuring the panel.

Multi-screen

I am using two screens, and I used to have kicker over the two displays. Can I do that with Plasma?

No. The reason is that having a panel over two displays adds a great deal of complexity, especially when the two displays have different resolution. As a result of this added complexity, this feature would not be guaranteed to work in all cases, hence it was not implemented.

Can I put the panel on only one screen?

All Plasma panels live in one screen. If you want panels on multiple screens, you can add panels and drag them to your preferred location using the panel controller you get when clicking on the Plasma icon in "Unlocked" mode.

On multi screen setups, the ZUI operates on all screens, the Dashboard just on one. Why is that?

The workflows are different. When zooming out, the user wants to get an overview, therefore activities on all screens are zoomed out. Whereas when using the Dashboard, the user usually wants to access specific functionality and might not want to interrupt his or her workflow on other activities.

Working with Keyboard Shortcuts

Are there any keyboard shortcuts for Plasma?

In addition to the mouse, there are a number of shortcuts available. The various combinations should be pressed in sequence, that is for example "Alt-D, +" means "press Alt and D, release and press +".

• Lock widgets: Alt-D, L
• Zoom out: Alt-D, -
• Zoom in: Alt-D, +
• Next widget: Alt-D, N
• Previous widget: Alt-D, P
• Add activity: Alt-D, Alt-A
• Next activity: Alt-D, Cursor right
• Previous activity: Alt-D, Cursor left
• Widget settings: Alt-D, S
• Remove widget: Alt-D, R
• Run associated application (if applicable): Alt-D, T
• Add widget: Alt-D, A

To change shortcuts, click on the desktop toolbox and select Shortcut settings.

How can I associate a keyboard shortcut with a widget?

Simply select a widget's settings (the wrench icon on the applet handle) and then click on Keyboard Shortcut. You will then be able to define a keyboard shortcut for your applet. Notice that unless the widget has defined some use for the keyboard shortcut, the shortcut itself will only give focus to the widget itself.