Tutorials/Install KDE software/en: Difference between revisions

Revision as of 05:30, 6 October 2012

Other languages:

Install KDE software

To install KDE software we recommend using the means of your distribution. Here is how you find your distribution's name and version.

Tip

When you see mono-spaced text on a yellow background like this that is something that you need to type in, exactly as it appears there.

Using Package Managers

openSUSE

You find openSUSE's package management tool in the Computer tab of the start menu. Open that and click on the Software management icon to start the package manager.

Searching for Kate; libkate1 is already installed, kate has been marked for installation.

Use the search field to find the package that you wish to install; you can search on the package name or the package description, and you only need to enter part of the name. You will then be presented with a list of packages matching your search. Click the selection boxes for the packages to be installed and then click Accept. See this page for more on package management and openSUSE.

Alternatively, you can use KPackageKit for installing software in openSUSE.

Ubuntu/Kubuntu

In Kubuntu 12.04 and later releases the default way to install software is using Muon Software Center. For previous releases you can use KPackageKit. Software installation for these releases is described in the KPackageKit article. Unless you have been instructed to add additional software sources, you should not need the information below.

Kubuntu is set up already with most of what you should need, but if you are instructed to add another software source then you need to select Settings in main menu and then select Configure Software Sources.

You will be prompted for your user account password and then see a window like this:

You normally do not need to change these settings. The software sources can be added by going to the Other Software tab, where you can click on the add button and type (or copy and paste) the software source address in the dialog box that opens:

Fedora

yumex will start the graphical package manager. When you start it, the first thing it will do is check to see whether you need any updates. Usually it is best to accept all the updates. If you click on Groups above the file list you will see it re-ordered, showing how a group of packages can be installed by a single click. Look for the cursor in the left panel, touching the arrow:

Clicking on the arrow-head rotates it,listing the package options for that group. This is where you can install the base KDE if it wasn't installed originally.

Mageia and Mandriva

KDE is the default desktop in Mageia and Mandriva. You can install KDE software using Mageia/Mandriva Control Center (mcc). Just use Favorites -> Mageia/Mandriva Control Center then go to Software Management -> Install & Remove Software page and choose Graphical desktop -> KDE. Standalone graphical installer can be launched from KRunner, just enter drakrpm into the input box.

Other distros

Other distros will offer a package manager. You will need to find it from your menu, but once found, one of these descriptions above should have something similar to yours. If in doubt, ask on IRC and someone will help you. If you've never used IRC, here is a guide to starting to chat with other users.

From the command line

If you find that using a package manager is unbearably slow, you will want to use command-line installation. This is much faster, but the disadvantage is that you need to know the exact name of the package you want to install. Each system has helpful commands for searching, for instance, so try using the first word of install command below, with --help appended. As an example, yum --help will list the commands you can use for Fedora, but they are many and can be confusing at first.

openSUSE

With openSUSE you install software using zypper for example to install KWrite you will open a console and enter zypper in kwrite. In older installations of openSUSE, yast was used like this: yast -i kwrite. You can still use yast if you prefer.

Ubuntu

With Ubuntu Linux you install software using apt-get. For example to install KWrite you will open a console and enter sudo apt-get install kwrite

Fedora

Fedora uses yum so to install KWrite you would open a console and type yum install kwrite If you are unsure of the name of a package, you can use yum list with wildcards to see all the packages with a word as part of the package name — for example yum list *network* will list all available packages with "network" as part of the name. Casting even wider, yum search mpeg will list all packages that either have mpeg in the name or in the description of the package.

Mageia and Mandriva

You can use urpmi to install KDE software from a command line. Other useful commands can be found at Wikipedia's Urpmi page

@@ Line 21: / Line 21: @@
 === Ubuntu/Kubuntu ===
-In Kubuntu the default way to install software is using [[Special:myLanguage/KPackageKit|KPackageKit]] (as of Kubuntu 11.04, this may change in future releases). Most software installation is described in the [[Special:myLanguage/KPackageKit|KPackageKit]] article. Unless you have been instructed to add additional software sources, you should not need the information below.
+In Kubuntu 12.04 and later releases the default way to install software is using '''Muon Software Center'''. For previous releases you can use  [[Special:myLanguage/KPackageKit|KPackageKit]]. Software installation for these releases is described in the [[Special:myLanguage/KPackageKit|KPackageKit]] article. Unless you have been instructed to add additional software sources, you should not need the information below.
-The only real difference is in choosing sources for your software. Kubuntu is set up already with most of what you should need, but if you are instructed to add another software source then you need to go to <menuchoice>Settings</menuchoice> tab to the left side of the '''KPackageKit''' window. If the software source is not already listed (see screenshot below) then you can click on <menuchoice>Edit origins</menuchoice> towards the bottom of the window.
+Kubuntu is set up already with most of what you should need, but if you are instructed to add another software source then you need to select <menuchoice>Settings</menuchoice> in main menu and then select <menuchoice>Configure Software Sources</menuchoice>.
-[[Image:Kubuntu1.png|center|500px|thumb|Browsing software sources in KPackageKit. If you want to add another one, click on "Edit origins" button.]]
+[[Image:Muon_menu.png|center|500px|thumb|Add software sources in Muon]]
 You will be prompted for your user account password and then see a window like this:
-[[Image:Kubuntu2.png|center|500px|thumb|Software sources settings &mdash; you normally do not need to change anything here, but rather should go to the second tab "Other software".]]
+[[Image:Muon_sw_settings.png|center|500px|thumb|Software Sources]]
-You normally do not need to change these settings. The software sources can be added by going to the <menuchoice>Other software</menuchoice> tab, where you can click on the add button and type (or copy and paste) the software source address in the dialog that opens:
+You normally do not need to change these settings. The software sources can be added by going to the <menuchoice>Other Software</menuchoice> tab, where you can click on the add button and type (or copy and paste) the software source address in the dialog box that opens:
-[[Image:Kubuntu3.png|center|500px|thumb|After clicking on the "Add" button, you can type in the location of the software source directly.]]
+[[Image:Muon_add_source.png|center|500px|thumb|After clicking on the "Add" button, type here software source location.]]
 === Fedora ===